Physical Properties | Metric | English | Comments |
---|---|---|---|
Density | 0.953 g/cc | 0.0344 lb/in³ | ASTM D1505 |
Network Polymers NPP 50-2753 Description: High Density Polyethylene (HDPE)Information provided by Network Polymers Inc. |
|||
Density | 0.953 g/cc | 0.0344 lb/in³ | Exxon Method |
ExxonMobil Escor® AT-320 EMAAA Terpolymer for Polymer Modification
(discontinued **) Data provided by the manufacturer, Exxon Chemical.45 Acid Number. Provides unusual adhesion to a variety of substrates and other components, such as aluminum foil, polyolefins, polycarbonate, PET, .. |
|||
Density | 0.953 g/cc | 0.0344 lb/in³ | ASTM D1505 |
Chevron Phillips Marlex® C514 HDPE Pipe and Corrugated Extrusion Resin
(discontinued **) Characteristics: Good melt strengthGood pipe stiffnessGood ESCRApplications: CulvertsStorm sewersLand drainageInformation provided by Chevron Phillips. |
|||
Density | 0.953 g/cc | 0.0344 lb/in³ | ASTM D1505 |
Chevron Phillips HiD® 9062 HDPE Injection Molding Resin
(discontinued **) Resin Type: Linear Copolymer, ASTM D 4976 Classification: PE 231, A 52600Characteristics: Excellent Flow, Moderate Impact Strength, Good Stiffness, Moderate ESCR, Excellent Shrinkage ResistanceAppli.. |
|||
Density | 0.953 g/cc | 0.0344 lb/in³ | ASTM D4883 |
Chevron Phillips HiD® 9352 HDPE Natural Pipe Resin
(discontinued **) Resin Type: gas phase linear hexane copolymer; ASTM D3350 Classification 335520A; ASTM D4976 Classification: PE 235, A 55701Applications: corrugated pipe applicationsInformation provided by Chevron .. |
|||
Density | 0.953 g/cc | 0.0344 lb/in³ | ASTM D4883 |
Chevron Phillips HiD® 9354 HDPE Natural Pipe Resin
(discontinued **) Resin Type: gas phase linear hexane copolymerApplications: corrugated pipe applicationsInformation provided by Chevron Phillips Chemical Company. |
|||
Density | 0.953 g/cc | 0.0344 lb/in³ | ISO 1183 |
Total Finathene® 53140 HDPE, blow molding, sheet
(discontinued **) Finathene® 53140 is a high density polyethylene produced by the slurry loop low pressure polymerization process FINATHENE® 53140 has been especially developed for the manufacturing of blow molded .. |
|||
Density | 0.953 g/cc | 0.0344 lb/in³ | ASTM D1505 |
Braskem ES 300 HDPE Blown Film Extrusion Polyethylene
(discontinued **) 38µm film gauge, obtained in 75mm extruder, die gap 1.0mm, output 1.75 kg/h-cm with 2:1 BUR. Applications: Grocery and T-shirt bags; merchandise bags; frozen-food bags; high-strength films. Informa.. |
|||
Density | 0.953 g/cc | 0.0344 lb/in³ | ASTM D1505 |
LyondellBasell Alathon® L5332CP High Density Polyethylene ApplicationsALATHON L 5332CP, formerly known as LYHD 048, is designed to meet the requirements of AAHTO M294 stress crack resistance. It exhibits excellent processing stability and high crush resis.. |
|||
Density | 0.953 g/cc | 0.0344 lb/in³ | ASTM D1505 |
LyondellBasell Alathon® L5332CP High Density Polyethylene, Blow Molding Grade ALATHON L5332CP is bimodal molecular weight distribution, fractional melt index HDPE resin that exhibits an exceptional balance of environmental stress crack resistance and stiffness. Typical applic.. |
|||
Density | 0.953 g/cc | 0.0344 lb/in³ | ASTM D1505 |
LyondellBasell Alathon® M5370PX High Density Polyethylene, Extrusion Grade ALATHON M5370PX is a copolymer with a narrow molecular weight distribution. This resin provides high impact strength and stress crack resistance, excellent color, low odor and good processability. T.. |
|||
Density | 0.953 g/cc | 0.0344 lb/in³ | ASTM D1505 |
LyondellBasell Alathon® M5370WC High Density Polyethylene ApplicationsALATHON M 5370WC is a natural, high density, polyethylene copolymer resin with a narrow molecular weight distribution formulated for use as primary insulation for coaxial and control cab.. |
|||
Density | 0.953 g/cc | 0.0344 lb/in³ | ASTM D1505 |
LyondellBasell Alathon® M5372 High Density Polyethylene ApplicationsALATHON M 5372 copolymer with narrow weight distribution. This resin provides high impact strength and stress crack resistance, excellent color, low odor and good processing stability. .. |
|||
Density | 0.953 g/cc | 0.0344 lb/in³ | ASTM D1505 |
LyondellBasell Petrothene® LR734011 High Density Polyethylene (Sheet & Profile Extrusion) ApplicationsThe PETROTHENE LR 7340 series of polyethylene resins exhibits good stiffness and ESCR. Typical applications include bottles for household chemicals.Regulatory StatusThe base resin LR 73.. |
|||
Density | 0.953 g/cc | 0.0344 lb/in³ | ASTM D4883 |
Ineos CP53-30 Polyethylene Copolymer CP53-30 is a high density polyethylene copolymer developed for corrugated piping applications. This product is recommended for use in applications that are required to meet AASHTO specifications M 2.. |
|||
Density | 0.953 g/cc | 0.0344 lb/in³ | ASTM D4883 |
Ineos T50-500-171 Polyethylene Copolymer This is a high density polyethylene copolymer having a narrow molecular weight distribution. It is intended for injection molding applications where a good balance of processability and end-use pro.. |
|||
Density | 0.953 g/cc | 0.0344 lb/in³ | ASTM D4883 |
Ineos T50-500-196 Polyethylene Copolymer This is a high density polyethylene copolymer having a narrow molecular weight distribution. It is intended for injection molding applications where a good balance of processability and end-use pro.. |
|||
Density | 0.953 g/cc | 0.0344 lb/in³ | ASTM D4883 |
Ineos T50-800 HDPE T50-800 is a high density polyethylene copolymer having a narrow molecular weight distribution. It is intended for injection molding applications where a good balance of processability and end-use .. |
|||
Density | 0.953 g/cc | 0.0344 lb/in³ | ASTM D4883 |
Ineos T50-800-01 Polyethylene Copolymer This is a high density polyethylene copolymer having a narrow molecular weight distribution. It is intended for injection molding applications where a good balance of processability and end-use pro.. |
|||
Density | 0.953 - 0.959 g/cc | 0.0344 - 0.0346 lb/in³ | ASTM D792-98 |
Ipiranga Petrochem GF 4950 HDPE IPQ produces High Density Polyethylene (HDPE) for use by different segments of the plastics molding industry in several processes, including blow molding, extrusion and injection molding.To produce .. |
|||
Density | 0.953 g/cc | 0.0344 lb/in³ | |
JPJ Technologies 2100J HDPE Extrusion Information provided by JPJ Technologies |
|||
Density | 0.953 g/cc | 0.0344 lb/in³ | ASTM D1505 |
LyondellBasell Alathon® M5350 High Density Polyethylene ApplicationsALATHON M 5350 copolymer with narrow molecular weight distribution. This resin provides high impact strength and stress crack resistance, excellent color, low odor and good processing s.. |
|||
Density | 0.953 g/cc | 0.0344 lb/in³ | ISO 1872/1 |
SIDPEC EGYPTENE® HD 5301 EA HDPE Blow Molding Applications:High performance blow molded containers typically of to 60 liters capacity for packaging aggressive productsRobust industrial and technical moldingsInformation provided by Interchim s.r.. |
|||
Density | 0.953 g/cc | 0.0344 lb/in³ | ASTM D1505 |
Formosa Plastics Formolene® E922 Film HDPE High Density Polyethylene Medium Molecular Weight Bi-Modal Resin Designed for Film Applications Formolene® E922 is a medium molecular weight grade of HDPE designed for good processing characteristi.. |
|||
Density | 0.953 g/cc | 0.0344 lb/in³ | ExxonMobil method |
ExxonMobil HDPE HD 7800P High Density Polyethylene Copolymer Resin Product Description: HD 7800P is a pipe extrusion grade high density polyethylene copolymer offering an excellent combination of stiffness and stress crack resistance. This material meets or exceeds.. |
|||
Density | 0.953 g/cc | 0.0344 lb/in³ | ASTM D4883 |
ExxonMobil Paxon™ AA53-003 Pipe Extrusion Resin Product Description: AA53-003 is a pipe extrusion grade high density polyethylene copolymer offering an excellent combination of stiffness and stress crack resistance. This material meets or exceeds.. |
|||
Density | 0.953 g/cc | 0.0344 lb/in³ | ASTM D1505 |
Amco PRIMATOP HDPE 175953 Injection Molding Polyethylene HDPE 175953 features easy flow, toughness, and high surface gloss. Applications include caps, thin wall parts, and toys.Former A-Top Polymers product; part of Amco product line since 2013. |
|||
Density | 0.953 g/cc | 0.0344 lb/in³ | ASTM D792 |
Aclo Accutech Polyethylene HD0204UVL High Density UV Stabilized |
|||
Density | 0.953 g/cc | 0.0344 lb/in³ | ASTM D4883 |
ExxonMobil Paxon™ BA53-035 Blow Molding Resin
(discontinued **) BA53-035 is a high molecular weight, high density polyethylene copolymer offering an outstanding combination of stiffness and toughness. The resin provides superior melt strength and impact resista.. |
|||
Density | 0.953 g/cc | 0.0344 lb/in³ | ISO 1183 |
Total Finathene® 53080 HDPE, blow molding, sheet
(discontinued **) Finathene E® 53080 is a high density polyethylene produced by the slurry loop low pressure polymerization process. Finathene E® 53080 has been especially developed for the production of containers.. |