Physical Properties | Metric | English | Comments |
---|---|---|---|
Particle Size | <= 100 µm | <= 100 µm | 90% smaller than |
Nyco MG WOLLASTOCOAT® Wollastonite Wollastonite is a naturally occurring white mineral with an acicular (needle-shaped) particle structure. This distinctive particle morphology makes wollastonite an ideal performance mineral for a br.. |
|||
Particle Size | <= 100 µm | <= 100 µm | 90% smaller than |
Nyco NYGLOS® 20 Wollastonite Wollastonite is a naturally occurring white mineral with an acicular (needle-shaped) particle structure. This distinctive particle morphology makes wollastonite an ideal performance mineral for a br.. |
|||
Particle Size | <= 100 µm | <= 100 µm | |
Potters Industries A-Series P-0040 Soda-Lime Silica Technical Quality Solid Glass Spheres Technical Quality, A-Series glass spheres are used to reduce particle size in coatings and inks. Glass Spheres used in oil well drilling improve lubrication and overall efficiencies of down hole oil.. |
|||
Particle Size | 100 µm | 100 µm | Median Diameter |
Omya OMYACARB® 100 - PT Calcium Carbonate A dry ground calcium carbonate with precise control of the top and bottom of the particle size distribution.Applications: Ideal for flooring and stucco applications.Information supplied by Omya Nort.. |
|||
Particle Size | 100 - 175 µm | 100 - 175 µm | D 0.9, SATP-114, Malvern method |
Raschig Group PiMC 1221 High gloss PiMC is a Powder in-Mould Coating designed to improve the surface quality, durability and aesthetic appearance of SMC/BMC products. The PiMC is electro statically sprayed onto the heated mould surfa.. |
|||
Particle Size | 100 - 175 µm | 100 - 175 µm | D 0.9, SATP-114, Malvern method |
Raschig Group PiMC 1241 Sanitary, uni color PiMC is a Powder in-Mould Coating designed to improve the surface quality, durability and aesthetic appearance of SMC/BMC products. The PiMC is electro statically sprayed onto the heated mould surfa.. |
|||
Particle Size | 100 - 175 µm | 100 - 175 µm | D 0.9, SATP-114, Malvern method |
Raschig Group PiMC 1249 Sanitary, mix color PiMC is a Powder in-Mould Coating designed to improve the surface quality, durability and aesthetic appearance of SMC/BMC products. The PiMC is electro statically sprayed onto the heated mould surfa.. |
|||
Particle Size | 100 - 175 µm | 100 - 175 µm | D 0.9, SATP-114, Malvern method |
Raschig Group PiMC 1949 Granite colors PiMC is a Powder in-Mould Coating designed to improve the surface quality, durability and aesthetic appearance of SMC/BMC products. The PiMC is electro statically sprayed onto the heated mould surfa.. |
|||
Particle Size | 100 - 3150 µm | 100 - 3150 µm | Average value: 1110 µm Grade Count:47 |
Overview of materials for Expanded Polystyrene (EPS) This property data is a summary of similar materials in the MatWeb database for the category "Expanded Polystyrene (EPS)". Each property range of values reported is minimum and maximum values of app.. |
|||
Particle Size | 100 - 200 µm | 100 - 200 µm | |
Polimeri Europa Extir® E 5000 AE Expandable Polystyrene
(discontinued **) Extir E 5000 AE is a flame-retardant expandable polystyrene in the form of spherical beads of medium-large particle size, with a low pentane content as blowing agent. Extir does not contain CFC or H.. |
|||
Particle Size | 100 µm | 100 µm | 0.1% max, wet sieve |
Magyar Aluminum ALO-DF223 Alumina Alumina for Polishing |
|||
Particle Size | 100 - 150 µm | 100 - 150 µm | Mean particle size is 100 to 150 µm. Crystal size is 10 µm. |
Momentive Performance Materials AC-6028 Boron Nitride (BN) Powder Grade AC-6028 consists of agglomerated particles of hexagonal Boron Nitride (BN) with a mean particle size between 100 and 150µ. It exhibits the unique properties of BN in a form readily used in.. |
|||
Particle Size | 100 - 170 µm | 100 - 170 µm | |
Lucite International Elvacite ® 2614 Acrylic Resin Elvacite® 2614 is a low molecular weight methyl methacrylate / n-butyl methacrylate copolymer. It is a fast – dissolving, low viscosity grade with quick solvent release for use in industrial.. |
|||
Particle Size | 100 - 250 µm | 100 - 250 µm | |
Lucite International Elvacite ® 4080 Acrylic Resin Elvacite® 4080 is a medium molecular weight methyl methacrylate copolymer. It is a relatively flexible acrylic resin useful for improving the recoatability and intercoat adhesion of UV wood finis.. |
|||
Particle Size | 100 - 200 µm | 100 - 200 µm | |
Lucite International Elvacite ® 4045 Acrylic Resin Elvacite® 4045 is a medium molecular weight methyl methacrylate polymer. It is designed for use in solvent based screen printing inks, but can be used in a variety of ink formulations.Information.. |
|||
Particle Size | >= 100 µm | >= 100 µm | >95 |
Solvay Chemicals Ixper® 35M Magnesium Peroxide IXPER® 35M is a Magnesium Peroxide powder used in a wide range of applications in environmental, and oil drilling e.g. markets. EINECS Number: 215-627-7/CAS Number: 1335-26-8Information provided .. |
|||
Particle Size | 100 µm | 100 µm | 95%, Laser diffraction; QSOP-5&75 |
Shamrock Technologies Fluoro T® 702 Thermoplastic Grade PTFE Additive The addition of micronized polytetrafluoroethylene (PTFE) powder to polymeric resins provides greatly increased resistance to surface wear and abrasion. PTFE has a very low coefficient of friction .. |
|||
Particle Size | <= 100 µm | <= 100 µm | 3% Max; 540MA3C5E |
Solvay MIRAPOL® SURF-S 411 HA Surfactant Description: Rinse aid polymer specially formulated for auto dish wash powders and tablets. Recommended as a substitute to rinse aid surfactants. Enables raw material cost saving, while boosting rin.. |
|||
Particle Size | 100 µm | 100 µm | 95%, Laser diffraction; QSOP-5&75 |
Shamrock Technologies Fluoro T® 602 Thermoplastic Grade PTFE Additive The addition of micronized polytetrafluoroethylene (PTFE) powder to polymeric resins provides greatly increased resistance to surface wear and abrasion. PTFE has a very low coefficient of friction .. |
|||
Particle Size | >= 100 µm | >= 100 µm | d90, 20%, Vibrated sieving |
TIMCAL TIMREX® KS150 Primary Synthetic Graphite TIMREX Primary Synthetic Graphite is produced in a unique highly controlled graphitization process which assures narrow specifications and unequalled consistent quality due to: monitoring of all pro.. |
|||
Particle Size | 100 µm | 100 µm | 98% less than value (Size B) |
Vesta Ceramics SicoMill® Grade 2 Silicon Powder General Description:SicoMill® is a fine-grained silicon powder, specially developed for the ceramic industry. We have five standard grinding grades, but we can produce powders adapted to single cu.. |
|||
Particle Size | 100 µm | 100 µm | 98% less than value (Size B) |
Vesta Ceramics SicoMill® Grade 4 Silicon Powder General Description:SicoMill® is a fine-grained silicon powder, specially developed for the ceramic industry. We have five standard grinding grades, but we can produce powders adapted to single cu.. |
|||
Particle Size | 100 µm | 100 µm | |
TIMCAL TIMREX® M100 mesh Natural Flake Graphite TIMREX Natural Flake Graphite is produced in a wide range of products distinguished by particle size distribution, chemistry and carbon content. Timcal mines the graphite from its own source in Lac-.. |
|||
Particle Size | 100 µm | 100 µm | |
Zeon Chemicals Nipol® 1411 Nitrile Powder and Crumb Elastomer Nipol 1411 is a copolymer of butadiene and high acrylonitrile, furnished as a very fine powder. This material contains sufficient antioxidant for normal storage condition.very fine crosslinked powde.. |
|||
Particle Size | 100 - 300 µm | 100 - 300 µm | 0.65 |
Arkema Group OREVAC® 18732 Grafted Maleic Anhydride Polypropylene OREVAC 18732 and 18732P are maleic anhydride grafted polypropylene used in the manufacturing of multiplayer structures. These products are available in pellets or in powder. OREVAC 18732 and 18732P .. |
|||
Particle Size | 100 - 300 µm | 100 - 300 µm | 0.65 |
Arkema Group OREVAC® 18732P Grafted Maleic Anhydride Polypropylene OREVAC 18732 and 18732P are maleic anhydride grafted polypropylene used in the manufacturing of multiplayer structures. These products are available in pellets or in powder. OREVAC 18732 and 18732P .. |
|||
Particle Size | 100 - 150 µm | 100 - 150 µm | average |
Momentive Performance Materials PolarTherm® PT350 Boron Nitride (BN) Powder Low Density BN AgglomerateWhen used in a variety of polymeric materials, PolarTherm™'s heat dissipating capability helps extend the service life and enhance the reliability of electronic compon.. |
|||
Particle Size | 100 - 200 µm | 100 - 200 µm | |
Polimeri Europa Extir® EH 5000 Expandable Polystyrene Extir EH 5000 is an expandable polystyrene in the form of spherical beads of medium-large particle size, with a low pentane content as blowing agent. Extir does not contain CFC or HCFC. This grade i.. |
|||
Particle Size | 100 - 260 µm | 100 - 260 µm | |
Shandong Dongyue Polymer DF-101 PTFE Molding Powder (Medium Particle Size) Usage: Can be processed to film, sheet, rob, gasket, axletree and presintered material.Packing: PTFE is packed in double layer PVC bags inside and in hard circular barrels outside.Storage: PTFE shou.. |
|||
Particle Size | 100 - 150 µm | 100 - 150 µm | |
Potters Industries A-Series P-0060 Soda-Lime Silica Technical Quality Solid Glass Spheres Technical Quality, A-Series glass spheres are used to reduce particle size in coatings and inks. Glass Spheres used in oil well drilling improve lubrication and overall efficiencies of down hole oil.. |