Physical Properties | Metric | English | Comments |
---|---|---|---|
Particle Size | <= 200 µm | <= 200 µm | 90% smaller than |
Nyco NYAD G® WOLLASTOCOAT® Wollastonite Wollastonite is a naturally occurring white mineral with an acicular (needle-shaped) particle structure. This distinctive particle morphology makes wollastonite an ideal performance mineral for a br.. |
|||
Particle Size | <= 200 µm | <= 200 µm | 90% smaller than |
Nyco NYAD® G Wollastonite High aspect ratio grade. This grade is recommended for polymer reinforcement.Wollastonite is a naturally occurring white mineral with an acicular (needle-shaped) particle structure. This distinctiv.. |
|||
Particle Size | 200 µm | 200 µm | SABIC Method |
SABIC Innovative Plastics Cycolac® INP338T ABS SABIC INP338T is an ultra high rubber ABS impact modifier resin, and is based on polybutadiene rubber. Offers superior impact efficiency, especially at low temperatures. Reduces notch sensitivity wh.. |
|||
Particle Size | 200 - 500 µm | 200 - 500 µm | |
Polimeri Europa Extir® F 1111 Expandable Polystyrene
(discontinued **) Extir F 1111 is an expandable polystyrene in the form of spherical beads of very fine particle size and a narrow particle size distribution, containing pentane as blowing agent. Extir does not cont.. |
|||
Particle Size | 200 µm | 200 µm | 0.1% max, wet sieve |
Magyar Aluminum ALOLT 730 Aluminum Hydroxide Viscosity Optimized Type |
|||
Particle Size | 200 µm | 200 µm | 0.1% max, wet sieve |
Magyar Aluminum ALO-P90-20 Alumina Alumina for Polishing |
|||
Particle Size | 200 - 10000 µm | 200 - 10000 µm | |
Minelco Millscale Fe2O3 plus other Fe oxides.Applications: Heavy Aggregates, Cements |
|||
Particle Size | 200 - 500 µm | 200 - 500 µm | GB/T 12005.7 |
Lushan DE-1 Polyethylene Sintered Powder PE sintered powder Lushan DE-1 is combined with more than 10 years practice and experience on the area of oil & gas pipeline anti-corrosion. PE sintered powder Lushan DE-1 is used on anti-corrosion .. |
|||
Particle Size | 200 - 500 µm | 200 - 500 µm | GB/T 12005.7 |
Lushan DP-1 Polypropylene sintered powder, Ultra Fast Cure PP sintered powder Lushan DP-1 is used on anti-corrosion coated steel pipe Polypropylene top coats and applied in oil & gas submarine counterweight pipeline to make a non-slid surface to avoid skidd.. |
|||
Particle Size | 200 µm | 200 µm | SABIC Method |
SABIC Innovative Plastics PPO 640 PPO PPO* 640 resin is a medium-high molecular weight polymer based on Polyphenylene Ether (PPE). PPO* is intended for use as an additive or a building block in a variety of thermoplastics and thermoplas.. |
|||
Particle Size | 200 µm | 200 µm | SABIC Method |
SABIC Innovative Plastics PPO 640 PPO (Europe-Africa-Middle East) PPO* 640 resin is a medium-high molecular weight polymer based on Polyphenylene Ether (PPE). PPO* is intended for use as an additive or a building block in a variety of thermoplastics and thermoplas.. |
|||
Particle Size | 200 µm | 200 µm | SABIC Method |
SABIC Innovative Plastics PPO 646 PPO PPO* 646 resin is a high molecular weight polymer based on Polyphenylene Ether (PPE). PPO* is intended for use as an additive or a building block in a variety of thermoplastics and thermoplastic ela.. |
|||
Particle Size | 200 µm | 200 µm | SABIC Method |
SABIC Innovative Plastics PPO 646 PPO (Europe-Africa-Middle East) PPO* 646 resin is a high molecular weight polymer based on Polyphenylene Ether (PPE). PPO* is intended for use as an additive or a building block in a variety of thermoplastics and thermoplastic ela.. |
|||
Particle Size | 200 - 500 µm | 200 - 500 µm | Dry |
Shamrock Technologies NanoFLON® P 39B Thermoplastic Grade PTFE Additive Shamrock Technologies presents revolutionary new nanosized polytetraflouoroethylene (PTFE). Using this proprietary method, Shamrock can offer fully controlled distributions of PTFE in the sub-micro.. |
|||
Particle Size | 200 - 500 µm | 200 - 500 µm | Dry |
Shamrock Technologies NanoFLON® P 40A Thermoplastic Grade PTFE Additive Shamrock Technologies presents revolutionary new nanosized polytetraflouoroethylene (PTFE). Using this proprietary method, Shamrock can offer fully controlled distributions of PTFE in the sub-micro.. |
|||
Particle Size | 200 - 500 µm | 200 - 500 µm | Dry |
Shamrock Technologies NanoFLON® P 47A Thermoplastic Grade PTFE Additive Shamrock Technologies presents revolutionary new nanosized polytetraflouoroethylene (PTFE). Using this proprietary method, Shamrock can offer fully controlled distributions of PTFE in the sub-micro.. |
|||
Particle Size | 200 - 500 µm | 200 - 500 µm | Dry |
Shamrock Technologies NanoFLON® P 51A Thermoplastic Grade PTFE Additive Shamrock Technologies presents revolutionary new nanosized polytetraflouoroethylene (PTFE). Using this proprietary method, Shamrock can offer fully controlled distributions of PTFE in the sub-micro.. |
|||
Particle Size | 200 - 300 µm | 200 - 300 µm | Dow Method |
Dow Saran® 2032 Information provided by Dow |
|||
Particle Size | <= 200 µm | <= 200 µm | Max |
CIMBAR BARIMITE™ G-50 High Purity Barite (BaSO4) Barimite Products are natural, off-white barites produced in Cartersville, Georgia. Cimbar's broad range of Barimite products are clean, high purity, high specific gravity, low solubility and chemi.. |
|||
Particle Size | >= 200 µm | >= 200 µm | average |
Momentive Performance Materials PolarTherm® PT370 Boron Nitride (BN) Powder Low Density BN AgglomerateWhen used in a variety of polymeric materials, PolarTherm™'s heat dissipating capability helps extend the service life and enhance the reliability of electronic compon.. |
|||
Particle Size | >= 200 µm | >= 200 µm | average |
Momentive Performance Materials PolarTherm® PT670 Boron Nitride (BN) Powder High Density BN AgglomerateWhen used in a variety of polymeric materials, PolarTherm™'s heat dissipating capability helps extend the service life and enhance the reliability of electronic comp.. |
|||
Particle Size | <= 200 µm | <= 200 µm | 90% smaller than |
Nyco ULTRAFIBRE® 30 Wollastonite Wollastonite is a naturally occurring white mineral with an acicular (needle-shaped) particle structure. This distinctive particle morphology makes wollastonite an ideal performance mineral for a br.. |
|||
Particle Size | 200 µm | 200 µm | average; ASTM D4894-98a |
3M Dyneon™ TFM™ X 1630 PTFE
(discontinued **) Semi-free-flowing resin for convenient handlingHigh bulk density leading to more economical processingVery dense polymer structure; low permeabilityGood electrical and mechanical propertiesSmoother .. |
|||
Particle Size | 200 µm | 200 µm | SABIC Method |
SABIC Innovative Plastics PPO 646 PPO (Asia Pacific) PPO* 646 resin is a high molecular weight polymer based on Polyphenylene Ether (PPE). PPO* is intended for use as an additive or a building block in a variety of thermoplastics and thermoplastic ela.. |