Polymer Property : Melt Index of Compound = 25 g/10 min Product List

Physical Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.

Physical Properties	Metric	English	Comments
Melt Index of Compound	25 g/10 min @Load 5.00 kg, Temperature 260 °C	25 g/10 min @Load 11.0 lb, Temperature 500 °F	ISO 1133
Polykemi AB POLYblend 65FS LB PC/ABS-Blend Information provided by Polykemi AB
Melt Index of Compound	25 g/10 min @Load 5.00 kg, Temperature 260 °C	25 g/10 min @Load 11.0 lb, Temperature 500 °F	ISO 1133
Polykemi AB POLYblend 65V PC/ABS-Blend, Flame Retardant Information provided by Polykemi AB
Melt Index of Compound	25 g/10 min @Load 5.00 kg, Temperature 260 °C	25 g/10 min @Load 11.0 lb, Temperature 500 °F	ISO 1133
Polykemi AB POLYblend 85FS PC/ABS-Blend Information provided by Polykemi AB
Melt Index of Compound	25 g/10 min @Load 5.00 kg, Temperature 260 °C	25 g/10 min @Load 11.0 lb, Temperature 500 °F	ISO 1133
Polykemi AB POLYblend 90VB PC/ABS-Blend, Flame Retardant Information provided by Polykemi AB
Melt Index of Compound	25 g/10 min @Load 2.16 kg, Temperature 230 °C	25 g/10 min @Load 4.76 lb, Temperature 446 °F	ISO 1133
Polykemi AB POLYfill PPC T25020 Polypropylene Copolymer, Mineral Reinforced Information provided by Polykemi AB
Melt Index of Compound	25 g/10 min @Load 2.16 kg, Temperature 230 °C	25 g/10 min @Load 4.76 lb, Temperature 446 °F	ISO 1133
Polykemi AB POLYfill PPC T25020 UV Polypropylene Copolymer, Mineral Reinforced Information provided by Polykemi AB
Melt Index of Compound	25 g/10 min @Load 2.16 kg, Temperature 230 °C	25 g/10 min @Load 4.76 lb, Temperature 446 °F	ISO 1133
Polykemi AB POLYfill PPH GF35040 D PP, Glass Fiber-Reinforced, Chemically Coupled, Detergent Resistant Information provided by Polykemi AB
Melt Index of Compound	25 g/10 min @Load 5.00 kg, Temperature 372 °C	25 g/10 min @Load 11.0 lb, Temperature 702 °F	ASTM D1238
3M Dyneon™ PFA 6525N Perfluoroalkoxy Fluorothermoplastic (discontinued **) The excellent chemical temperature resistance of Dyneon™ 6500N PFA is available across a range of melt flow indices, for optimal processability. Dyneon™ PFA 6502N, the highest molecular weight gra..
Melt Index of Compound	25 g/10 min @Load 21.6 kg, Temperature 190 Â°C	25 g/10 min @Load 47.6 lb, Temperature 374 Â°F
Huntsman IROGRANÂ® PS442-202 TPU-Polyester Introduction: IROGRAN PS440-202 is a high performance polyester based thermoplastic polyurethane intended for extrusion and injection molding applications. IROGRAN PS440-202 is part of the HUNTSMAN ..
Melt Index of Compound	25 g/10 min @Load 2.16 kg, Temperature 190 Â°C	25 g/10 min @Load 4.76 lb, Temperature 374 Â°F	ASTM D1238
ICO Polymers ICOTEXâ„¢ 520-5004 1000 Micron EVA Powder Description: ICOTEX 520-5004 is an EVA powder that has been developed to meet the special requirements of the textile coating industry. Key Characteristics: good melt flow and flexibility and a viny..
Melt Index of Compound	25 g/10 min @Load 2.16 kg, Temperature 190 Â°C	25 g/10 min @Load 4.76 lb, Temperature 374 Â°F
Meilian Chemical PE12086 WHITE MASTERBATCH WHITE PE12086 is a white low density polyethylene based masterbatch highly-concentrated with TiO2 without any addition of filler and fluorescence whitener. This product is designed for general-purpo..
Melt Index of Compound	25 g/10 min @Load 1.20 kg, Temperature 280 Â°C	25 g/10 min @Load 2.65 lb, Temperature 536 Â°F	MVR [cm^3/10 min]; ISO 1133
SABIC Innovative Plastics NORYL V081 PPE+HIPS (Europe-Africa-Middle East) NORYL V081 is a high flow, UV stabilized PPO/PS blend for TV backplate applications.
Melt Index of Compound	25 g/10 min @Load 5.00 kg, Temperature 360 Â°C	25 g/10 min @Load 11.0 lb, Temperature 680 Â°F	MVR [cm^3/10 min]; ISO 1133
SABIC Innovative Plastics ULTEM 9011 PEI Transparent, high flow Polyetherimide (Tg 217C). ECO Conforming. Improved processability for Fiber extrusion.
Melt Index of Compound	25 g/10 min @Load 5.00 kg, Temperature 360 Â°C	25 g/10 min @Load 11.0 lb, Temperature 680 Â°F	MVR [cm^3/10 min]; ISO 1133
SABIC Innovative Plastics ULTEM 9011 PEI (Asia Pacific) Transparent, high flow Polyetherimide (Tg 217C). ECO Conforming. Improved processability for Fiber extrusion.
Melt Index of Compound	25 g/10 min @Load 5.00 kg, Temperature 360 Â°C	25 g/10 min @Load 11.0 lb, Temperature 680 Â°F	MVR [cm^3/10 min]; ISO 1133
SABIC Innovative Plastics ULTEM 9011 PEI (Europe-Africa-Middle East) Transparent, high flow Polyetherimide (Tg 217C). Resin is RoHS compliant. Improved processability for Fiber extrusion.
Melt Index of Compound	25 g/10 min @Load 5.00 kg, Temperature 220 Â°C	25 g/10 min @Load 11.0 lb, Temperature 428 Â°F	MVR [cm^3/10 min]; ISO 1133
SABIC Innovative Plastics ULTEM HU1010 PEI (Asia Pacific) Transparent, enhanced flow Polyetherimide (Tg 217C). ECO Conforming. For medical devices and pharmaceutical applications. Healthcare management of change, biocompatible (ISO 10993 or USP Class VI),..
Melt Index of Compound	25 g/10 min @Load 5.00 kg, Temperature 265 Â°C	25 g/10 min @Load 11.0 lb, Temperature 509 Â°F	MVR [cm^3/10 min]; ISO 1133
SABIC Innovative Plastics XenoyÂ® X5300WX PBT+PC (Europe-Africa-Middle East) Unreinforced, opaque PBT+PC alloy. Chemical resistance and good mechanical performance. UV-stabilized. Excellent weatherability.
Melt Index of Compound	25 g/10 min	25 g/10 min
Sibur PL-1GS Polyvinyl Chloride (PVC) For the production of boot tops and soles of autumn-spring purpose and for production of boots by molding method under pressure.
Melt Index of Compound	25 g/10 min @Load 5.00 kg, Temperature 360 Â°C	25 g/10 min @Load 11.0 lb, Temperature 680 Â°F	MVR [cm^3/10 min]; ISO 1133
SABIC Innovative Plastics ULTEM AUT200 PEI Transparent high flow Polyetherimide (Tg 217C). Very low outgassing and plateout, for automotive lighting applications where highly metallized, reflective surfaces are required. Haze onset temperat..
Melt Index of Compound	25 g/10 min @Load 2.16 kg, Temperature 250 Â°C	25 g/10 min @Load 4.76 lb, Temperature 482 Â°F	MVR [cm^3/10 min]; ISO 1133
SABIC Innovative Plastics ValoxÂ® SHF4910 PBT (Europe-Africa-Middle East) 6.5% glass reinforced, Super High Flow, flame retardant PBT.
Melt Index of Compound	25 g/10 min @Load 5.00 kg, Temperature 265 Â°C	25 g/10 min @Load 11.0 lb, Temperature 509 Â°F	MVR [cm^3/10 min]; ISO 1133
SABIC Innovative Plastics XenoyÂ® X5300WX PBT+PC (Asia Pacific) Unreinforced, opaque PBT+PC alloy. Chemical resistance and good mechanical performance. UV-stabilized. Excellent weatherability.
Melt Index of Compound	25 g/10 min @Load 2.16 kg, Temperature 280 Â°C	25 g/10 min @Load 4.76 lb, Temperature 536 Â°F	MVR [cm^3/10 min]; ISO 1133
SABIC Innovative Plastics NORYL FXN4020H PPE+HIPS high gloss Noryl
Melt Index of Compound	25 g/10 min @Load 2.16 kg, Temperature 230 °C	25 g/10 min @Load 4.76 lb, Temperature 446 °F	ASTM D1238
A. Schulman POLYFORT™ FTP 3130H-01/FTP 3130HU-Colors DescriptionPolyfort® FTP 3130H-01 (non-UV stabilized) and FTP 3130HU-Colors (UV-stabilized) are high flow injection molding polyolefin alloys which exhibit an exceptional stiffness-impact balance a..
Melt Index of Compound	25 g/10 min @Load 2.16 kg, Temperature 230 °C	25 g/10 min @Load 4.76 lb, Temperature 446 °F	ASTM D1238
A. Schulman POLYFORT™ FTP 3130H-01/FTP 3130HU-Colors DescriptionPolyfort® FTP 3130H-01 (non-UV stabilized) and FTP 3130HU-Colors (UV-stabilized) are high flow injection molding polyolefin alloys which exhibit an exceptional stiffness-impact balance a..
Melt Index of Compound	25 g/10 min @Load 2.16 kg, Temperature 230 °C	25 g/10 min @Load 4.76 lb, Temperature 446 °F	ASTM D1238
A. Schulman POLYFORT™ FTP 3130H-01/FTP 3130HU-Colors DescriptionPolyfort® FTP 3130H-01 (non-UV stabilized) and FTP 3130HU-Colors (UV-stabilized) are high flow injection molding polyolefin alloys which exhibit an exceptional stiffness-impact balance a..
Melt Index of Compound	25 g/10 min @Load 2.16 kg, Temperature 230 °C	25 g/10 min @Load 4.76 lb, Temperature 446 °F	ASTM D1238
A. Schulman POLYFORT™ FTP 3130H-01/FTP 3130HU-Colors DescriptionPolyfort® FTP 3130H-01 (non-UV stabilized) and FTP 3130HU-Colors (UV-stabilized) are high flow injection molding polyolefin alloys which exhibit an exceptional stiffness-impact balance a..
Melt Index of Compound	25 g/10 min @Temperature 230 °C	25 g/10 min @Temperature 446 °F	ASTM D1238
Toyobo PELPRENE™ P48U Polyester TPE, Weather-resistant Features: Polyester TPE, Weather-resistantInformation provided by Toyobo.
Melt Index of Compound	25 - 35 g/10 min @Load 2.16 kg, Temperature 190 °C	25 - 35 g/10 min @Load 4.76 lb, Temperature 374 °F	ASTM D1238
Petroquimica Triunfo Trithene® JX 7300 LDPE - Injection Molding The Trithene® JX 7300 resin is a low-density polyethylene (LDPE) with outstanding flow ability and flexibility. Those attributes are especially important to meet the requirements for fast injection..
Melt Index of Compound	25 g/10 min @Load 5.00 kg, Temperature 360 °C	25 g/10 min @Load 11.0 lb, Temperature 680 °F	MVR [cm^3/10 min]; ISO 1133
SABIC Innovative Plastics ULTEM AUT200 PEI (Europe-Africa-Middle East) Transparent high flow Polyetherimide (Tg 217C). Very low outgassing and plateout, for automotive lighting applications where highly metallized, reflective surfaces are required. Haze onset temperatu..
Melt Index of Compound	25 g/10 min	25 g/10 min	ASTM D1238
DuPont Elvax® 250 Ethylene-Vinyl Acetate Copolymer Resin Elvax resins offer a unique combination of processing and performance characteristics. They provide outstanding toughness and resilience and maintain flexibility over a broad temperature range with..