Physical Properties | Metric | English | Comments |
---|---|---|---|
Melt Flow | 1.6 g/10 min | 1.6 g/10 min | ASTM D1238 |
Plaskolite West Optix® CA-86 Clear General Purpose Acrylic Resin General purpose acrylic resin, extrusion and injection molding gradeApplications: A general-purpose acrylic resin designed for high heat application. This resin offers the highest heat resistance a.. |
|||
Melt Flow | 1.6 g/10 min @Load 3.80 kg, Temperature 230 °C |
1.6 g/10 min @Load 8.38 lb, Temperature 446 °F |
ASTM D-1238 |
Plaskolite West Optix® CP - 86 General Purpose Acrylic Resin Generally unaffected by alkalis, hydrocarbons, non-oxidizing acids, and salt water. Transparent, translucent, opaque, and custom colors in various grades of melt flow rate and heat resistance are av.. |
|||
Melt Flow | 1.6 g/10 min @Temperature 190 °C |
1.6 g/10 min @Temperature 374 °F |
|
North Wood Plastics PS with 20% Wood Fiber Data provided by North Wood Plastics, Inc. |
|||
Melt Flow | 1.6 g/10 min | 1.6 g/10 min | Condition G |
Ineos Nova 1210 High Heat Crystal Polystyrene
(discontinued **) High heat resistance, High molecular weight, optimum performance in extruded foamApplications: Meat and poultry trays, Egg cartons, Food packagingExposure to gamma radiation in the 2.02-6.06 megarad.. |
|||
Melt Flow | 1.6 g/10 min | 1.6 g/10 min | ExxonMobil Method |
ExxonMobil LD 117.03 Blown Overwrap Film Resin
(discontinued **) LD 117 resins are homopolymer film resins with good clarity and excellent stiffness. Film from LD 117 resins can be used in overwrap applications and push-through type packaging equipment. Film ma.. |
|||
Melt Flow | 1.6 g/10 min | 1.6 g/10 min | Exxon Method |
ExxonMobil Escorene® LD-117 MDPE Blown Overwrap Film Resin, Tough
(discontinued **) Data provided by the manufacturer, Exxon Chemical.A homopolymer film resin with good clarity and excellent stiffness. Film made from LD-117 can be used in overwrap applications and in push-through .. |
|||
Melt Flow | 1.6 g/10 min | 1.6 g/10 min | ASTM D1238 |
LyondellBasell Petrothene® NA272130 Medium Density Polyethylene, Film Extrusion Grade PETROTHENE NA272130 is a medium density polyethylene resin designed for overwrap film applications. NA272130 exhibits good film optics and high stiffness.Regulatory Status: NA272130 meets the requir.. |
|||
Melt Flow | 1.6 g/10 min | 1.6 g/10 min | Condition G |
Ineos Nova 1290 High Heat Crystal Polystyrene Good processing characteristics, Low residual monomer, Low oligomersApplications: Direct injection foam, Biaxially oriented sheet, Glazing sheetExposure to gamma radiation in the 2.02-6.06 megarad r.. |
|||
Melt Flow | 1.6 - 2.0 g/10 min @Load 2.61 kg, Temperature 190 °C |
1.6 - 2.0 g/10 min @Load 5.75 lb, Temperature 374 °F |
ASTM D1238 |
LG Chemical SEETEC BF415 LDPE Characteristics: Good Processability and Excellent Optical Properties Applications: Masking filmCAS No. 9002-88-4Information provided by LG Chemical |
|||
Melt Flow | 1.6 - 2.4 g/10 min @Load 2.16 kg, Temperature 190 °C |
1.6 - 2.4 g/10 min @Load 4.76 lb, Temperature 374 °F |
ASTM D1238-00 |
Ipiranga Petrochem HE 7250 LS-L HDPE IPQ produces High Density Polyethylene (HDPE) for use by different segments of the plastics molding industry in several processes, including blow molding, extrusion and injection molding.To produce .. |
|||
Melt Flow | 1.6 g/10 min | 1.6 g/10 min | ASTM D1238 |
Lucky CF-920 Acrylic May be UV stabilized. General Lucky PMMA qualities: Transparent/elegant appearance, high heat and weather resistance, excellent chemical resistance and coloring capability. |
|||
Melt Flow | 1.6 g/10 min | 1.6 g/10 min | ASTM D1238 |
Lucky EG-920 Acrylic, Extrusion Grade Special extrusion grade with excellent stress cracking resistance, intended mainly for exterior applications. May be UV stabilized. General Lucky PMMA qualities: Transparent/elegant appearance, hi.. |
|||
Melt Flow | 1.6 g/10 min @Load 6.60 kg, Temperature 295 °C |
1.6 g/10 min @Load 14.6 lb, Temperature 563 °F |
ASTM D1238 |
SABIC Innovative Plastics ULTEM LTX300B PEI Standard flow Polyetherimide blend with low toxicity, smoke, and flame evolution. ECO Compliant, UL94 V0 listing. |
|||
Melt Flow | 1.6 g/10 min @Load 6.60 kg, Temperature 295 °C |
1.6 g/10 min @Load 14.6 lb, Temperature 563 °F |
ASTM D1238 |
SABIC Innovative Plastics ULTEM LTX300B PEI (Asia Pacific) Standard flow Polyetherimide blend with low toxicity, smoke, and flame evolution. ECO Compliant, UL94 V0 listing. |
|||
Melt Flow | 1.6 g/10 min | 1.6 g/10 min | ISO 1133 |
Solvay Specialty Polymers Polidan® PNT 0555/06 Polyethylene, Crosslinked (XLPE) POLIDAN® PNT 0555/06 is a silane crosslinkable PE compound which is used together with a catalyst masterbatch to accelerate the crosslinking reaction. It is used for flexible crosslinkable pipes... |
|||
Melt Flow | 1.6 g/10 min @Load 5.00 kg, Temperature 200 °C |
1.6 g/10 min @Load 11.0 lb, Temperature 392 °F |
ASTM D 1238 |
Styrolution PS 1200/1201 GPPS Extrusion / thermoforming foam sheetHigh melt strengthHigh StiffnessUSP Class VI certifiedUL Classification 94 HBInformation provided by Styrolution |
|||
Melt Flow | 1.6 g/10 min @Load 5.00 kg, Temperature 200 °C |
1.6 g/10 min @Load 11.0 lb, Temperature 392 °F |
ASTM D 1238 |
Styrolution PS 1290/1291 GPPS Extrusion / thermoforming foam sheetLow residual styrene monomer contentHigh melt strength and stiffnessUL Classification 94 HB for 1290Information provided by Styrolution |
|||
Melt Flow | 1.6 g/10 min @Load 5.00 kg, Temperature 200 °C |
1.6 g/10 min @Load 11.0 lb, Temperature 392 °F |
ASTM D1238 |
Samsung Cheil Industries Starex® VE-0860 ABS, Unreinforced FR Flame-retardant ABS with high heat resistance that can be used in battery cases and adaptorsInformation provided by Samsung Cheil Industries. |
|||
Melt Flow | 1.6 g/10 min | 1.6 g/10 min | ASTM D1238 |
Westlake EB169 Low Density Polyethylene Westlake EB169 is a low-density polyethylene with high stiffness designed for beverage shrink overwrap and towel/tissue packaging. It has good toughness and blends well with LLDPE resins.Application.. |
|||
Melt Flow | 1.6 g/10 min | 1.6 g/10 min | ASTM-D1238 |
Westlake EB171 MDPE Medium Density Polyethylene Westlake EF171 is a MDPE resin suggested for use in shrink packaging applications. This material has good TD shrinkage, good optical properties, excellent machinability, and toughness. This resin gr.. |
|||
Melt Flow | 1.6 g/10 min @Load 2.16 kg, Temperature 190 °C |
1.6 g/10 min @Load 4.76 lb, Temperature 374 °F |
ASTM D1238 |
ExxonMobil LDPE LD 117.85 Low Density Polyethylene Resin Product Description: LD 117.85 is a homopolymer film resin with good clarity and excellent stiffness. Film made from LD 117.85 resin can be used in overwrap applications and in push-through type pac.. |
|||
Melt Flow | 1.6 g/10 min @Load 5.00 kg, Temperature 200 °C |
1.6 g/10 min @Load 11.0 lb, Temperature 392 °F |
ASTM D1238 |
Entec Hyrene® PSCRY 1.5 General Purpose Polystyrene Available in North America Features: Crystal, High Heat Resistance, General Purpose, High Molecular WeightRoHS Compliant Form: Pellets Information provided by Entec |
|||
Melt Flow | 1.6 g/10 min @Load 2.16 kg |
1.6 g/10 min @Load 4.76 lb |
Melt flow ratio I10/I2 is 10.2. |
Dow AFFINITY™ PF 1140 Polyolefin Plastomer AFFINITY® PF 1140 polyolefin plastomer is an ethylene alpha-olefin resin designed for use in a variety of demanding applications including high-speed, form-fill seal products, display films and fre.. |
|||
Melt Flow | 1.6 g/10 min @Load 2.16 kg |
1.6 g/10 min @Load 4.76 lb |
Melt flow ratio I10/I2 is 8.1. |
Dow DOWLEX™ 2101 Linear Low Density Polyethylene, Blown Film Grade DOWLEX® 2101 Polyethylene resin, a general purpose blown film extrusion resin, is an excellent choice for high speed, thin gauge film applications. It contains medium levels of both slip additive a.. |
|||
Melt Flow | 1.6 g/10 min | 1.6 g/10 min | ASTM D1238 |
E-Polymers EFLEX® I2030 Ionomer I-series (Ionomer): E-FLEX Ionomer is a family of ethylene acrylic acid (E/AA) copolymers, in which part of the acrylic acid is neutralized with metal ions such as zinc (Zn) or sodium (Na) or magnes.. |
|||
Melt Flow | 1.6 g/10 min @Load 2.16 kg, Temperature 235 °C |
1.6 g/10 min @Load 4.76 lb, Temperature 455 °F |
|
Arkema Group Rilsan® AESN Y T6L Nylon 12, MoS2 Filled (Dry) Designation ISO 1874-PA12,EHLS,22-010,MD05Grade with molybdenum filler for extrusion. Available color: steel gray. Reinforced light and heat stabilizing agents.Low friction coefficient. No need of l.. |
|||
Melt Flow | 1.6 g/10 min @Load 2.16 kg, Temperature 230 °C |
1.6 g/10 min @Load 4.76 lb, Temperature 446 °F |
ASTM D1238 |
Braskem TI4015F Impact Copolymer Polypropylene Description: Superior balance of stiffness and impact strength. Applications: Suggested uses include extrusion applications requiring good impact strength. Process: Extrusion. This resin meets the .. |