Physical Properties | Metric | English | Comments |
---|---|---|---|
Melt Flow | 9.1 - 12 g/10 min @Load 2.16 kg, Temperature 230 °C |
9.1 - 12 g/10 min @Load 4.76 lb, Temperature 446 °F |
Procedure A; ASTM D1238 |
PolyOne Maxxam™ FR PP Concentrate 4 Polypropylene, Unspecified (PP, Unspecified) Maxxam™ FR flame-retardant polyolefin compounds and masterbatches meet stringent flammability performance requirements defined by industry agencies, including Underwriters Laboratories UL 94 V-2, V.. |
|||
Melt Flow | 5.0 - 12 g/10 min @Load 2.16 kg, Temperature 265 °C |
5.0 - 12 g/10 min @Load 4.76 lb, Temperature 509 °F |
ASTM D1238 |
Polymer Resources PC/TP-FR2 Flame Retardant PC/Polyester Alloy Flame Retardant, High Impact, Excellent Chemical ResistanceFeatures: • Flame Retardant • Impact Modified • Self Extinguishing • Good Chemical ResistanceProcess: Injection MoldingNotes: All p.. |
|||
Melt Flow | 6.0 - 12 g/10 min @Load 2.16 kg, Temperature 265 °C |
6.0 - 12 g/10 min @Load 4.76 lb, Temperature 509 °F |
ASTM D1238 |
Polymer Resources PC/TP-GP3-IM PC/Polyester Alloy, Impact Modified Superior Chemical Resistance, Impact ModifiedProcess: Injection MoldingNotes: All physical, mechanical and thermal testing conducted on 1/8-inch thick, un-pigmented, test samples.Information provide.. |
|||
Melt Flow | 5.0 - 12 g/10 min @Load 1.20 kg, Temperature 300 °C |
5.0 - 12 g/10 min @Load 2.65 lb, Temperature 572 °F |
ASTM D1238 |
Polymer Resources PC-G10-IM Polycarbonate, 10% Glass Reinforced, Impact Modified Polycarbonate, 10% Glass Reinforced, Impact ModifiedProcess: Injection MoldingNotes: All physical, mechanical and thermal testing conducted on 1/8-inch thick, un-pigmented, test samples.Information .. |
|||
Melt Flow | 7.0 - 12 g/10 min | 7.0 - 12 g/10 min | ASTM D1238 |
Polymer Resources PC-GP1-10TFE Polycarbonate, General Purpose, Wear Resistant, Low Flow Process: Injection MoldingNotes: All physical, mechanical and thermal testing conducted on 1/8-inch thick, un-pigmented, test samples. Information provided by Polymer Resources Corporation. |
|||
Melt Flow | 6.0 - 12 g/10 min @Load 2.16 kg, Temperature 265 °C |
6.0 - 12 g/10 min @Load 4.76 lb, Temperature 509 °F |
ASTM D1238 |
Polymer Resources PC/TP-GP3 PC/Polyester Alloy High Impact, Superior Chemical ResistanceProcess: Injection MoldingNotes: All physical, mechanical and thermal testing conducted on 1/8-inch thick, un-pigmented, test samples.Information provided by.. |
|||
Melt Flow | 9.0 - 12 g/10 min | 9.0 - 12 g/10 min | ASTM D1238 |
Kolon KOCETAL® SO301 Wear Modified Acetal Resin Silicone Oil added, improved wear property. Information provided by API-Kolon. |
|||
Melt Flow | 8.0 - 12 g/10 min | 8.0 - 12 g/10 min | ASTM D1238 |
Kolon KOCETAL® TF302 Wear Modified Acetal Resin PTFE powder added, improved wear property. Applications: High speed, high load and wear resistant products. Information provided by API-Kolon. |
|||
Melt Flow | 10 - 12 g/10 min @Load 5.00 kg, Temperature 190 °C |
10 - 12 g/10 min @Load 11.0 lb, Temperature 374 °F |
DIN 53735 |
Iran Petrochemical (PCC) Arak I4 HDPE Information provided by Iran Petrochemical Commercial Co. |
|||
Melt Flow | 6.0 - 12 g/10 min @Load 5.00 kg, Temperature 200 °C |
6.0 - 12 g/10 min @Load 11.0 lb, Temperature 392 °F |
ASTM D1238 |
Kraton® G2874 GO-N (SEBS) Compound Description: Kraton G2874 GO-N is a compound supplied from North America in the physical form identified: Kraton G2874 GO-N - supplied as a dusted, dense pelletRegion: North AmericaApplications: Com.. |
|||
Melt Flow | 7.0 - 12 g/10 min @Load 1.20 kg, Temperature 300 °C |
7.0 - 12 g/10 min @Load 2.65 lb, Temperature 572 °F |
ASTM D1238 |
Iran Petrochemical (PCC) PC 0712 Polycarbonate Suitable for molding and extrusionInformation provided by Iran Petrochemical Commercial Co. |
|||
Melt Flow | 8.0 - 12 g/10 min | 8.0 - 12 g/10 min | 230/2.16; May be specified; ASTM D1238 |
Plastics Group Polifil® C-40 40% Calcium Carbonate-Reinforced Polypropylene Polifil® C series compounds are homopolymer polypropylene resins reinforced with fine particle size calcium carbonate. They combine high impact with stiffness, heat aging, good colorability, resist.. |
|||
Melt Flow | 8.0 - 12 g/10 min | 8.0 - 12 g/10 min | 230/2.16; May be specified; ASTM D1238 |
Plastics Group Polifil® RMC-10 10% Calcium Carbonate-Reinforced Polypropylene, High Impact Polifil® RMC series compounds are high impact polypropylenes reinforced with fine particle size calcium carbonate. In addition to the highest impact possible, they possess good stiffness, heat agin.. |
|||
Melt Flow | 8.0 - 12 g/10 min | 8.0 - 12 g/10 min | 230/2.16; May be specified; ASTM D1238 |
Plastics Group Polifil® RMC-30 30% Calcium Carbonate-Reinforced Polypropylene, High Impact Polifil® RMC series compounds are high impact polypropylenes reinforced with fine particle size calcium carbonate. In addition to the highest impact possible, they possess good stiffness, heat agin.. |
|||
Melt Flow | 8.0 - 12 g/10 min | 8.0 - 12 g/10 min | 8-12 g/10min; Cond L; ASTM D1238 |
Washington Penn PPH3TF4-BLK Polypropylene, 40% Talc Filled Homopolymer. Meets GMP.PP.030 spec.Applications: Fan shrouds, heater housings, various under hood uses.Data provided by Washington Penn Plastic Co., Inc. |
|||
Melt Flow | 8.0 - 12 g/10 min | 8.0 - 12 g/10 min | 230/2.16; May be specified; ASTM D1238 |
Plastics Group Polifil® GFPP-10 10% Glass-Reinforced Polypropylene Polifil® GFPP series compounds are homopolymer polypropylene resins reinforced with glass fibers. They provide high impact with increased strength, stiffness, surface hardness, and higher continuou.. |
|||
Melt Flow | 8.0 - 12 g/10 min | 8.0 - 12 g/10 min | 230/2.16; May be specified; ASTM D1238 |
Plastics Group Polifil® RMT-20 20% Talc-Reinforced Polypropylene, High Impact Polifil® RMT series compounds are high impact polypropylenes reinforced with asbestos-free talc. In addition to high impact strength, they possess a high flex modulus and high heat deflection resis.. |
|||
Melt Flow | 6.0 - 12 g/10 min @Temperature 230 °C |
6.0 - 12 g/10 min @Temperature 446 °F |
Condition L; ASTM D1238 |
A. Schulman PP 1349 Polypropylene Medium Impact Copolymer Polypropylene DescriptionPolypropylene PP 1349 is a medium impact copolymer polypropylene.Information provided by A. Schulman. |
|||
Melt Flow | 8.0 - 12 g/10 min | 8.0 - 12 g/10 min | ISO 1133 |
Chengdu Polyster H3303 Thermoplastic Polyether-ester Elastomer (TPEE) Low modulus molding and injection grade. Contains improved color- stable antioxidants. Excellent flex resistance at low temperatures. Moldable even in thin sections. Can be used in light-colored pro.. |
|||
Melt Flow | 8.0 - 12 g/10 min @Load 2.16 kg, Temperature 230 °C |
8.0 - 12 g/10 min @Load 4.76 lb, Temperature 446 °F |
ASTM D1238 |
Aaron Industries AAROLENE® ARPP C 200-3 Polypropylene Compounded Resin AAROLENE® ARPP 200 Series Polypropylene Compounded ResinColor may be specified. Melt Flow Index may be specified. |
|||
Melt Flow | 8.0 - 12 g/10 min @Load 2.16 kg, Temperature 230 °C |
8.0 - 12 g/10 min @Load 4.76 lb, Temperature 446 °F |
ASTM D1238 |
Aaron Industries AAROPRENE® TFIPP 2030 High Impact Talc Filled Polypropylene AAROPRENE® TFIPP 2000 Series Reinforced CompoundsMelt flow index may be specified. Color may be specified. |
|||
Melt Flow | 4.0 - 12 g/10 min @Load 5.00 kg, Temperature 200 °C |
4.0 - 12 g/10 min @Load 11.0 lb, Temperature 392 °F |
ASTM D1238 |
Aaron Industries AVPS GP(crystal) 100-1 Virgin Polystyrene - Crystal Melt flow index may be specified. |
|||
Melt Flow | 8.0 - 12 g/10 min | 8.0 - 12 g/10 min | ASTM D1238 |
Buckeye Polymers BP RPP 1009 GK Polypropylene, 10% Glass Filled Product Information: 10% chemically coupled glass reinforced polypropyleneProduct Features:Offers improved flex modulus while maintaining a low specific gravity propertyOffers improved heat stabilit.. |
|||
Melt Flow | 8.0 - 12 g/10 min | 8.0 - 12 g/10 min | ASTM D1238 |
Buckeye Polymers BP RPP 1012 T BLK Polypropylene, Talc Filled Product Information: Our Talc filled product lines exhibit excellent properties such as high stiffness, surface aesthetics, low coefficient of thermal expansion, low shrinkage, improved scratch and .. |
|||
Melt Flow | 8.0 - 12 g/10 min | 8.0 - 12 g/10 min | ASTM D1238 |
Buckeye Polymers BP RPP 2009 GK (B) BLK Polypropylene, 20% Glass Filled Product Information: Our glass reinforced product lines exhibit increased tensile strength, stiffness, and heat deflection. Highly optimized glass reinforced PP resins have successfully replaced en.. |
|||
Melt Flow | 8.0 - 12 g/10 min @Load 2.16 kg, Temperature 230 °C |
8.0 - 12 g/10 min @Load 4.76 lb, Temperature 446 °F |
ASTM D1238 |
Aaron Industries AAROPRENE® GFPP 2040 Glass Filled Polypropylene AAROPRENE® GFPP 2000 Series Glass Reinforced CompoundsMelt flow index may be specified. Color may be specified. |
|||
Melt Flow | 8.0 - 12 g/10 min @Load 2.16 kg, Temperature 230 °C |
8.0 - 12 g/10 min @Load 4.76 lb, Temperature 446 °F |
ASTM D1238 |
Aaron Industries AAROPRENE® TFIPP 2010 High Impact Talc Filled Polypropylene AAROPRENE® TFIPP 2000 Series Reinforced CompoundsMelt flow index may be specified. Color may be specified. |
|||
Melt Flow | 8.0 - 12 g/10 min @Load 2.16 kg, Temperature 230 °C |
8.0 - 12 g/10 min @Load 4.76 lb, Temperature 446 °F |
ASTM D1238 |
Aaron Industries AAROPRENE® TFIPP 2040 High Impact Talc Filled Polypropylene AAROPRENE® TFIPP 2000 Series Reinforced CompoundsMelt flow index may be specified. Color may be specified. |
|||
Melt Flow | 4.0 - 12 g/10 min | 4.0 - 12 g/10 min | 200/5; May be specified; ASTM D1238 |
Plastics Group Polifil® RP-HIPS High Impact Polystyrene Polifil® RP-High Impact Polystyrene (HIPS) combines the good stiffness properties of polystyrene, with enhanced impact properties gained by the addition of impact modifiers, usually butadiene rubbe.. |
|||
Melt Flow | 8.0 - 12 g/10 min | 8.0 - 12 g/10 min | ASTM D1238 |
Buckeye Polymers BP RPP 4010 TW Polypropylene, Talc Filled Product Information: Our Talc filled product lines exhibit excellent properties such as high stiffness, surface aesthetics, low coefficient of thermal expansion, low shrinkage, improved scratch and .. |