Polymer Property : Melt Flow = 6.0 g/10 min Product List

Physical Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.

Physical Properties	Metric	English	Comments
Melt Flow	6.0 g/10 min @Load 0.325 kg, Temperature 275 °C	6.0 g/10 min @Load 0.716 lb, Temperature 527 °F	STN EN ISO 1133
Plastcom PLASTAMID® 66 BT N 27 B/IM PA66 PA66 for injection molding, modified for general use, with excellent manufacturing properties. Use: automotive, engineering, electrical and consumer-goods industry - electrical tools, fasteners, cla..
Melt Flow	6.0 g/10 min @Load 2.16 kg, Temperature 230 °C	6.0 g/10 min @Load 4.76 lb, Temperature 446 °F	STN EN ISO 1133
Plastcom SLOVAMID 6 GB 30 HI PA6 reinforced with glass beads, improved impact strength PA 6 for injection molding, reinforced with 30% glass beads, impact modified. Application: impacted moldings and moldings with higher strength applied in automotive, electrical, engineering and cons..
Melt Flow	6.0 g/10 min @Load 2.16 kg, Temperature 230 °C	6.0 g/10 min @Load 4.76 lb, Temperature 446 °F	ASTM D1238
RheTech Products M25UVP250-01 25% Mica Reinforced Polypropylene Copolymer, UV Stabilized, Black Applications: BracketsCowl screensRigid exterior componentsInjection molding conditions reported in table.Information provided by RheTech Products.
Melt Flow	6.0 g/10 min @Load 2.16 kg, Temperature 230 °C	6.0 g/10 min @Load 4.76 lb, Temperature 446 °F	ASTM D1238
RheTech Products P100-01 Polypropylene Homopolymer, Black Applications: Wire harnessesTrim componentsUnderhood applicationsInjection molding conditions reported in table.Information provided by RheTech Products.
Melt Flow	6.0 g/10 min	6.0 g/10 min	(Condition L) ASTM D-1238-94a
Multibase Multi-Flex® TPO D-6206 This TPO product was developed for facia applications exhibiting adhesion for current automotive paint systems.Data provided by Multibase.
Melt Flow	6.0 g/10 min	6.0 g/10 min	Exxon Method
ExxonMobil Optema® TC-020 Ethylene Methyl Acrylate for Injection Molding (discontinued **) Data provided by the manufacturer, Exxon Chemical.6.5% Methyl Acrylate. An Ethylene Methyl Acrylate copolymer which can be injection molded to produce pliable parts. It can also be used for making..
Melt Flow	6.0 g/10 min @Load 2.16 kg, Temperature 190 °C	6.0 g/10 min @Load 4.76 lb, Temperature 374 °F	ISO 1133
DuPont Performance Polymers Delrin® 300TE BK602 Acetal Homopolymer (Unverified Data**) Delrin® 300TE BK602 is a medium-high viscosity toughened acetal homopolymer for injection molding with extremely low VOC emissions.Information provided by DuPont Performance Polymers
Melt Flow	6.0 g/10 min	6.0 g/10 min	ASTM D1238
LyondellBasell PlexarÂ® PX2250 Extrudable Tie-Layer Resin, Anhydride Modified HDPE PlexarÂ® tie-layers are chemically modified resins used to bond unlike materials, primarily in packaging and industrial applications. Common adherents include polyethylene resins and copolymers, s..
Melt Flow	6.0 g/10 min @Load 1.20 kg, Temperature 300 Â°C	6.0 g/10 min @Load 2.65 lb, Temperature 572 Â°F	ASTM D1238
LG Chemical LUPOY SC2202 PC+GF20%, High Impact Description: Injection Molding, PC+GF20%, Good Toughness, Good Impact, Chemical ResistanceApplication: Mobile Phone HousingCAS: 103598-77-2 and 65997-17-3Information provided by LG Chemical
Melt Flow	6.0 g/10 min @Load 2.16 kg, Temperature 230 Â°C	6.0 g/10 min @Load 4.76 lb, Temperature 446 Â°F	ISO 1133
Inno-Comp INNOPOLÂ® CS 2-4630 GFR Flame Retarded Polypropylene Block-Copolymer INNOPOLÂ® CS 2-4630 GFR is a flame retarded polypropylene block-copolymer compound. This grade is available in nature and custom colored form.INNOPOLÂ® CS 2-4630 GFR is recommended for producing..
Melt Flow	6.0 - 8.0 g/10 min @Load 2.16 kg, Temperature 190 Â°C	6.0 - 8.0 g/10 min @Load 4.76 lb, Temperature 374 Â°F	ASTM D1238-00
Ipiranga Petrochem PCC 0710 Polypropylene The production of polypropylene (PP) employs Spheripol technology from Montell / Italy. This technology has been acclaimed all over the world and is known as clean technology, because it does not pr..
Melt Flow	6.0 g/10 min	6.0 g/10 min	ASTM D1238
Lucent Polymers PC-1406FD Polycarbonate, FDA Compliant, Extrusion/Blow Molding Grade Medium FlowAdd "R" for Added ReleaseAdd "U" for UVÂ StabilizedInformation provided by Lucent Polymers, Inc.
Melt Flow	6.0 g/10 min @Load 10.0 kg, Temperature 220 Â°C	6.0 g/10 min @Load 22.0 lb, Temperature 428 Â°F	ISO 1133
Styrolution NovodurÂ® 4000PG ABS Novodur Ultra 4000PG is an injection molding grade especially suitable for electroplating, providing enhanced heat resistance.Information provided by Styrolution
Melt Flow	6.0 g/10 min @Load 5.00 kg, Temperature 200 Â°C	6.0 g/10 min @Load 11.0 lb, Temperature 392 Â°F	ASTM D1238
Samsung Cheil Industries StarexÂ® VE-0813 ABS, Unreinforced FR Information provided by Samsung Cheil Industries.
Melt Flow	6.0 g/10 min @Load 1.20 kg, Temperature 300 Â°C	6.0 g/10 min @Load 2.65 lb, Temperature 572 Â°F	ISO 1133
Styron CALIBREâ„¢ 2061-6 Polycarbonate Resin Overview: CALIBREâ„¢ 2061-6 resin is suitable for steam and ethylene oxide sterilization required by the health care industry. CALIBRE 2061-6 provides excellent heat resistance, impact strength, ..
Melt Flow	6.0 g/10 min @Load 3.80 kg, Temperature 230 Â°C	6.0 g/10 min @Load 8.38 lb, Temperature 446 Â°F	ASTM Data
Styron Magnumâ„¢ 2642 ABS, Impact Grade MAGNUMÂ® ABS resins are thermoplastic materials which provide an excellent balance of processability, impact resistance and heat resistance as imparted by the various polymer compositions. MAGNUM ..
Melt Flow	6.0 g/10 min @Load 1.20 kg, Temperature 300 Â°C	6.0 g/10 min @Load 2.65 lb, Temperature 572 Â°F	ASTM D1238
Styron EMERGEâ„¢ 4330-6 Polycarbonate EMERGEâ„¢ PC 4330-6 advanced resin is a polycarbonate resin offering ultraviolet light stability, high heat resistance and maximum toughness. Applications: Consumer Electronics and Information ..
Melt Flow	6.0 g/10 min @Load 5.00 kg, Temperature 280 Â°C	6.0 g/10 min @Load 11.0 lb, Temperature 536 Â°F	ASTM D1238
SABIC Innovative Plastics NORYL PPX PPX830 PPE+PP (Asia Pacific) Noryl* PPX830 Polyphenylene Oxide (PPO*) + Polypropylene (PP) resin is a 30 % Glass Reinforced, injection moldable grade with a HDT /1.8MPa temperature resistance of 153 deg C and a Tensile modulus ..
Melt Flow	6.0 g/10 min @Load 2.16 kg, Temperature 190 °C	6.0 g/10 min @Load 4.76 lb, Temperature 374 °F	ASTM D1238
Borealis Borecene™ RM8343RC Linear Polyethylene for Rotational Molding Borecene RM8343RC is a third generation linear medium density natural polyethylene for rotational molding. Borecene RM8343RC is a special grade, which has passed many rigorous tests and can be cons..
Melt Flow	6.0 - 14 g/10 min	6.0 - 14 g/10 min	May be specified; ASTM D1238
Plastics Group Polifil® BS-70 70% Barium Sulfate Reinforced Polypropylene Polifil® BS series compounds are homopolymer polypropylene resins reinforced with barium sulfate. They possess increased specific gravity, high flex modulus, high deflection temperature, good chemi..
Melt Flow	6.0 g/10 min	6.0 g/10 min	ASTM D1238
A. Schulman POLYFORT™ FPP 1236 Glass Filled Chemically Coupled Homopolymer Polypropylene DescriptionPolyfort® FPP 1236 is a 20% glass filled chemically coupled homopolymer polypropylene product. Information provided by A. Schulman.
Melt Flow	6.0 - 12 g/10 min @Temperature 230 °C	6.0 - 12 g/10 min @Temperature 446 °F	Condition L; ASTM D1238
A. Schulman PP 1349 Polypropylene Medium Impact Copolymer Polypropylene DescriptionPolypropylene PP 1349 is a medium impact copolymer polypropylene.Information provided by A. Schulman.
Melt Flow	6.0 g/10 min @Load 2.16 kg, Temperature 190 °C	6.0 g/10 min @Load 4.76 lb, Temperature 374 °F	ASTM D1238
A. Schulman POLYBATCH™ Deep Red 50389 Concentrate Based In Linear Low-Density Polyethylene DescriptionPOLYBATCH® 50389 is a deep red color concentrate based in linear low density polyethylene. This product was formulated to offer color in polyethylene film applications. POLYBATCH® 503..
Melt Flow	6.0 - 12 g/10 min @Load 5.00 kg, Temperature 230 °C	6.0 - 12 g/10 min @Load 11.0 lb, Temperature 446 °F	ISO 1133
Eurostar Starpylen M1000-BK1A987 PP, Carbon Black Starpylen M1000-BK1A987 is a high carbon black load PP resinInformation provided by Eurostar.
Melt Flow	6.0 g/10 min @Load 1.00 kg, Temperature 235 °C	6.0 g/10 min @Load 2.20 lb, Temperature 455 °F
Arkema Group Pebax® 7033 SN 01 Polyether Block Amide (PEBA) (Conditioned) POLYETHER BLOCK AMIDE (PEBA) hardness 70 shore D Non plasticized flexible Polyamide Outstanding mechanical properties at low temperature (-40°C) Applications: Sport (Football shoe sole, ski top lay..
Melt Flow	6.0 g/10 min @Load 1.00 kg, Temperature 235 °C	6.0 g/10 min @Load 2.20 lb, Temperature 455 °F
Arkema Group Pebax® 7033 SN 01 Polyether Block Amide (PEBA) (Dry) POLYETHER BLOCK AMIDE (PEBA) hardness 70 shore D Non plasticized flexible Polyamide Outstanding mechanical properties at low temperature (-40°C) Applications: Sport (Football shoe sole, ski top lay..
Melt Flow	6.0 g/10 min	6.0 g/10 min	ASTM D1238
Aclo Accutech Polypropylene Homopolymer HP0334T40L1 Talc Reinforced
Melt Flow	6.0 g/10 min	6.0 g/10 min	ASTM D1238
Asahi Kasei Thermylene® P6-30FG-0699 30% Glass Fiber Reinforced, Heat Stabilized Information provided by Asahi Thermofil
Melt Flow	6.0 - 12 g/10 min	6.0 - 12 g/10 min	ASTM D1238
Buckeye Polymers BP RPP 3505 GM BLK Polypropylene, Glass Filled Information Provided by Buckeye Polymers, Inc.
Melt Flow	6.0 g/10 min @Load 5.00 kg, Temperature 200 °C	6.0 g/10 min @Load 11.0 lb, Temperature 392 °F	ASTM D1238
Supreme Petrochem SP EXP 31 Toughened Polystyrene Characteristics Very high clarity & gloss High dart impact strength & good stiffness Good crease retention Good heat resistance High yield compared to PVC, APET Processing Extrusion Vacuum form..