Physical Properties | Metric | English | Comments |
---|---|---|---|
Thickness | 102 microns | 4.00 mil | |
Premix Thermoplastics PRE-ELEC® ESD 5360 Static Dissipative Thermoplastic Compound PRE-ELEC® ESD 5360 is a static dissipative thermoplastic compounds based on polypropylene homopolymer. The dissipative property is permanent and built into the polymer chain. Surface resistance val.. |
|||
Thickness | 102 microns | 4.00 mil | |
Premix Thermoplastics PRE-ELEC® PE 1296 Conductive Thermoplastic Compound PRE-ELEC® PE 1296 is a conductive thermoplastic masterbatch/compound based on PE-HD. Conductivity is achieved by using special conductive carbon black. PRE-ELEC® PE 1296 has a high concentration o.. |
|||
Thickness | 102 microns | 4.00 mil | |
Premix Thermoplastics PRE-ELEC® PP 1398 Conductive Thermoplastic Compound PRE-ELEC® PP 1398 is a conductive thermoplastic compound based on polypropylene. Conductivity is achieved by using special conductive carbon black. In addition to a low electrical resistivity PRE-E.. |
|||
Thickness | 102 microns | 4.00 mil | Adhesive |
Dielectric Polymers NT-140A89 General Purpose Laminating Adhesive
(discontinued **) Acrylic adhesive with moisture stable PE coated kraft (89#) liner.Features: Plasticizer migration resistantChemical resistantMoisture resistantApplications: Mounting nameplates, signs, graphic panel.. |
|||
Thickness | 102 microns | 4.00 mil | ASTM D3652 |
3M 394 Vent Tape 3M™ Vent Tape 394 is a non-woven, synthetic backing that meets most typical outgassing requirements for foam-in-place insulation processes in appliance and other industries and contains fungicide f.. |
|||
Thickness | 102 microns | 4.00 mil | silicone, side 1; Arlon SQA-TMS-003 |
Arlon 19646B025 Silicone Rubber/Fiberglass Laminate Side 1:cured silicone rubber; Substrate: 1523 fiberglass; Side 2: uncured silicone rubber; Interleave: 3 mil Polyethylene |
|||
Thickness | 102 microns | 4.00 mil | Tape |
3M 9420 Splicing Tapes 3M™ Splicing Tapes utilize on acrylic pressure sensitive adhesive system that offers a balance of initial adhesion and good holding power.Information provided by 3M |
|||
Thickness | 102 microns | 4.00 mil | Liner |
3M 9576Y Splicing Tape 3M™ Splicing Tape offers excellent flying splice and core starting wet grab characteristics. They are typically used in the printing industry and perform well at process speeds in excess of 2000 fe.. |
|||
Thickness | 102 microns | 4.00 mil | without adhesive |
3M Controltac™ 3545C Removable Graphic Film with Comply™ Adhesive 4-mil white, opaque, polyolefin film; Chloride-free film; Pressure-activated adhesive for easy sliding, tacking, snap up and repositioning; Air release channels for fast and easy application; Remova.. |
|||
Thickness | 102 microns | 4.00 mil | Side 1 |
Arlon R34066X015 0.015" (0.381 mm) Cured Silicone with Fiberglass Substrate Design/Construction:Side 1: Platinum Cured SiliconeSide 2: Peroxide Catalyzed Silicone Appearance: Gray silicone gum on fiberglass clothThis data Represents typical values for the production materia.. |
|||
Thickness | 102 - 114 microns | 4.00 - 4.50 mil | with adhesive |
3M Scotchcal™ 50-10 Graphic Film Film series 50 is a 3-mil calendered vinyl film, available in 28 colors. The film has a clear, pressure-sensitive film with a blue liner on the white films for easier visibility when wedding, and a .. |
|||
Thickness | 102 - 114 microns | 4.00 - 4.50 mil | with adhesive |
3M Scotchcal™ 50-94 Graphic Film Film series 50 is a 3-mil calendered vinyl film, available in 28 colors. The film has a clear, pressure-sensitive film with a blue liner on the white films for easier visibility when wedding, and a .. |
|||
Thickness | 102 microns | 4.00 mil | |
3M Scotchkote™ 165CS Urethane Sealer Scotchkote Urethane Sealer 165CS has been specifically developed as a low viscosity primer/sealer for concrete and cementitious surfaces prior to application of other Scotchkote urethane systems.Pro.. |
|||
Thickness | 102 microns | 4.00 mil | Backing |
3M 4411G Extreme Sealing Tape 3M™ Extreme Sealing Tape is a family of single coated, pressure sensitive adhesive tapes designed for difficult sealing applications. The backing on this tape is an ionomer film that is very tough .. |
|||
Thickness | 102 microns | 4.00 mil | Prime Coated 2113 Fiberglass, Substrate |
Arlon 47091R012 0.012" (0.305 mm) Uncured Rubber with Fiberglass Substrate Design/Construction:Side 1: Uncured RubberSide 2: Uncured RubberAppearance: Red silicone gum on polymer linerThis data represents typical values for the production material. The data should not be u.. |
|||
Thickness | 102 microns | 4.00 mil | Facestock |
3M 7052W Screen Printable Vinyl Performance Label Products 3M™ Screen Printable Vinyl Performance Label Products are durable, high performance materials that offer good durability and moisture resistance. These vinyl label stocks utilize 3M™ Adhesive P140.. |
|||
Thickness | 102 microns | 4.00 mil | side 1; Arlon SQA-TMS-003 |
Arlon 51756R028 Silicone Rubber/Fiberglass Laminate Interleave: 3 mil PE; Side 1: cured silicone rubber; Substrate: 7628 fiberglass; Side 2: uncured silicone rubber |
|||
Thickness | 102 microns | 4.00 mil | Side 1; Arlon SQA-TMS-003 |
Arlon 55586R040 0.040" (1.02 mm) Uncured/Cured Silicone Rubber with Fiberglass Substrate Design/Construction: Side 1: Cured Silicone Rubber Substrate: Style 162 FiberglassSide 2: Uncured Silicone RubberInterleave: LDPEAppearance: Red silicone gum and rubber on fiberglass clothThis data .. |
|||
Thickness | 102 microns | 4.00 mil | Side 1 |
Arlon 55949C028 0.029" (0.737 mm) Uncured/Cured Silicone Rubber with Fiberglass Substrate Design/Construction:Side 1: Cured Silicone Rubber LayerSide 2: Uncured Silicone Rubber Appearance: Brown silicone rubber and gum on fiberglass clothThis data Represents typical values for the produc.. |
|||
Thickness | >= 102 microns | >= 4.00 mil | Side 2 |
Arlon R31310R012 Uncured Rubber with Fiberglass Substrate Design/Construction:Side 1: Aluminized PET FilmSide 2: Uncured Rubber This data Represents typical values for the production material. The data should not be used to write, or in place of, material .. |
|||
Thickness | 102 microns | 4.00 mil | ASTM D3652 |
3M Cold Seal® 4130 Polyethylene Tape 3M™ Cold Seal® Polyethylene Tape 4130 is a temporary tape with a self-sealing latex emulsion and feature a self-adhering cohesive coating which bonds to itself and not to the product to be package.. |
|||
Thickness | 102 microns | 4.00 mil | estimated wet film thickness |
Aremco Corr-Paint™ CP2010 High Temperature Protective Coating Urethane, Aluminum Filled These epoxy and urethane based coatings are used for producing corrosion and wear resistant barriers to 500°F. Typical applications include tanks, piplines, boilers, precipitators, scrubbers, bag h.. |
|||
Thickness | 102 microns | 4.00 mil | without adhesive |
3M 3635-20b Diffuser Film Control light transmission or achieve special effects for backlit signs; 2 and 4-mil vinyl film; Pressure-sensitive adhesive and Adheres to rigid or flexible substratesInformation provided by 3M |
|||
Thickness | 102 microns | 4.00 mil | Release Liner |
3M 463 Adhesive Transfer Tape with 3M Adhesive 400 3M™ Adhesive Transfer Tapes 463, 465, 9457 and 9665 with 3M™ Adhesive 400 are ideal for bonding together a wide variety of similar and dissimilar materials such as metals, glass, wood, papers, pai.. |
|||
Thickness | 102 microns | 4.00 mil | Release Liner |
3M 465 Splicing Tapes 3M™ Splicing Tapes utilize on acrylic pressure sensitive adhesive system that offers a balance of initial adhesion and good holding power.Information provided by 3M |
|||
Thickness | 102 microns | 4.00 mil | Tape |
3M 9576R Splicing Tape 3M™ Splicing Tape offers excellent flying splice and core starting wet grab characteristics. They are typically used in the printing industry and perform well at process speeds in excess of 2000 fe.. |
|||
Thickness | 102 microns | 4.00 mil | Facestock |
3M FV016402 Removable Vinyl Label Products 3M™ Removable Vinyl Label Products are flexible, conformable clear vinyl label stocks that offer durability and moisture resistance. These vinyl labels utilize 3M™ Adhesive R3500, which is designe.. |
|||
Thickness | >= 102 microns | >= 4.00 mil | Side 1 |
Arlon 44560R009 0.009" (0.229 mm) Uncured Silicone Rubber with Fiberglass Substrate Design/Construction:Side 1: Uncured Silicone Rubber Appearance: Red silicone gum on fiberglass fabricThis data represents typical values for the production material. The data should not be used to w.. |
|||
Thickness | 102 microns | 4.00 mil | Side 1 |
Arlon 44406X015 0.015" (0.381 mm) Platinum Cured Silicone/Peroxide Catalyzed Silicone Design/Construction:Side 1: Platinum Cured SiliconeSide 2: Peroxide Catalyzed SiliconeAppearance: Gray silicone gum on fiberglass clothThis data represents typical values for the production material.. |