Physical Properties | Metric | English | Comments |
---|---|---|---|
Environmental Stress Crack Resistance | >= 200 hour | >= 200 hour | ISO 22088 |
Polimeri Europa Clearflex® RP 50 U Linear Medium Density Polyethylene Clearflex RP 50 U is a linear medium density polyethylene resin, with antioxidants and UV stabilizers, suitable for rotomolding applications.Items manufactured with Clearflex RP 50 U show good mecha.. |
|||
Environmental Stress Crack Resistance | >= 200 hour | >= 200 hour | ASTM D1693 |
NIZHNEKAMSKNEFTEKHIM PE 6750H (506H8) High Density Polyethylene Product obtained by gas phase polymerization of ethylene in presence of complex metalorganic catalysts.Information provided by manufacturer |
|||
Environmental Stress Crack Resistance | >= 200 hour | >= 200 hour | |
Reltek BONDiT™ HM-502 Coating, Sealant, Adhesive System A protective coat for most metal, glass, and ceramic materials for use against corrosion and other chemical attacks. Useful against fungi growth. Bondit HM-502 is a thermoplastic emulsion system.Inf.. |
|||
Environmental Stress Crack Resistance | >= 200 hour | >= 200 hour | |
Reltek BONDiT™ HM-505 Coating, Sealant, Adhesive System Information provided by Reltek LLC |
|||
Environmental Stress Crack Resistance | >= 200 hour | >= 200 hour | (10% Igepal), F<sub>50</sub>; ASTM D1693 |
Formosa Plastics Formolene® L63565U Rotational Molding LLDPE
(discontinued **) Hexene CopolymerApplications: Toys, medium tanks, material handling equipment and flat surface rotational molding applications.Formolene L63565U is fully heat and UV stabilized.Meets all requirement.. |
|||
Environmental Stress Crack Resistance | >= 200 hour | >= 200 hour | ASTM D1693-70 |
Total Finathene® 56020 HDPE, blow molding, sheet
(discontinued **) FINATHENE® 56020 S is a very high molecular weight high density polyethylene produced by the slurry loop low pressure polymerization process. FINATHENE® 56020 S has been especially developed for t.. |
|||
Environmental Stress Crack Resistance | 200 hour | 200 hour | F50, Condition B; ASTM D-1693 |
ExxonMobil Escorene® LX-0252 LMDPE Rotational Molding Grade
(discontinued **) Data provided by the manufacturer, Exxon Chemical.A linear medium density polyethylene providing an excellent processing window for molding toys and consumer items. The resin is formulated to provi.. |
|||
Environmental Stress Crack Resistance | >= 200 hour | >= 200 hour | in OZ-10 |
Kazanorgsintez 102-15 Composition of Low Density Polyethylene, Crack-Proof Production Method: Composition is achieved on the basis of grades 10204-003, 15303-003, 10703-020 and formulas of additives 15, 16, 17, 18, 19, 20, 21, 22, and 23. Application: Intended for prod.. |
|||
Environmental Stress Crack Resistance | >= 200 hour | >= 200 hour | in OZ-10 |
Kazanorgsintez 102-17 Composition of Low Density Polyethylene, Crack-Proof Production Method: Composition is achieved on the basis of grades 10204-003, 15303-003, 10703-020 and formulas of additives 15, 16, 17, 18, 19, 20, 21, 22, and 23. Application: Intended for prod.. |
|||
Environmental Stress Crack Resistance | >= 200 hour | >= 200 hour | in OZ-10 |
Kazanorgsintez 102-21 Composition of Low Density Polyethylene, Crack-Proof Production Method: Composition is achieved on the basis of grades 10204-003, 15303-003, 10703-020 and formulas of additives 15, 16, 17, 18, 19, 20, 21, 22, and 23. Application: Intended for prod.. |
|||
Environmental Stress Crack Resistance | >= 200 hour | >= 200 hour | in OZ-10 |
Kazanorgsintez 102-23 Composition of Low Density Polyethylene, Crack-Proof Production Method: Composition is achieved on the basis of grades 10204-003, 15303-003, 10703-020 and formulas of additives 15, 16, 17, 18, 19, 20, 21, 22, and 23. Application: Intended for prod.. |
|||
Environmental Stress Crack Resistance | >= 200 hour | >= 200 hour | ASTM D1693 |
LyondellBasell Montell SE191 Polypropylene Impact Copolymer Key Features: excellent electrical and physical properties, excellent resistance to environmental and thermal stress-cracking, low density an low dielectric constant contribute to light and smaller .. |
|||
Environmental Stress Crack Resistance | >= 200 hour | >= 200 hour | in OZ-10 |
Kazanorgsintez 153-21 Composition of Low Density Polyethylene, Crack-Proof Production Method: Composition is achieved on the basis of grades 10204-003, 15303-003, 10703-020 and formulas of additives 15, 16, 17, 18, 19, 20, 21, 22, and 23. Application: Intended for prod.. |
|||
Environmental Stress Crack Resistance | >= 200 hour | >= 200 hour | in OZ-10 |
Kazanorgsintez 153-23 Composition of Low Density Polyethylene, Crack-Proof Production Method: Composition is achieved on the basis of grades 10204-003, 15303-003, 10703-020 and formulas of additives 15, 16, 17, 18, 19, 20, 21, 22, and 23. Application: Intended for prod.. |
|||
Environmental Stress Crack Resistance | 200 hour | 200 hour | ASTM D1693 |
LyondellBasell Petrothene® LT570401 High Density Polyethylene ApplicationsPETROTHENE LT 5704-01 resin exhibits good stiffness and environment stress crack resistance. Typical applications are bleach and household chemical bottles.Regulatory StatusLT 5704-01 m.. |
|||
Environmental Stress Crack Resistance | >= 200 hour | >= 200 hour | F50; ASTM D1693 |
LG Chemical LUTENE-H PE0235 HDPE Description: LUTENE-H PE0235 is a materials with high toughness and rigidity suitable for cable protection It has very high resistance to stress cracking and long-term internal pressure creep proper.. |
|||
Environmental Stress Crack Resistance | >= 200 hour | >= 200 hour | in OZ-10 |
Kazanorgsintez 153-17 Composition of Low Density Polyethylene, Crack-Proof Production Method: Composition is achieved on the basis of grades 10204-003, 15303-003, 10703-020 and formulas of additives 15, 16, 17, 18, 19, 20, 21, 22, and 23. Application: Intended for prod.. |
|||
Environmental Stress Crack Resistance | 200 hour @Temperature 30.0 °C |
200 hour @Temperature 86.0 °F |
F50; ASTM D1693 |
SIDPEC EGYPTENE® HD 3840 EA MDPE Wire and Cable Grade Applications:Suitable for the production of silane cross-linkable compoundsLow voltage power cable insulationInjection molded technical parts and closureInformation provided by Interchim s.r.l., off.. |
|||
Environmental Stress Crack Resistance | 200 hour | 200 hour | F50; BP 13C/25 |
SIDPEC EGYPTENE® HD 3840 UA MDPE Rotational Molding Applications:Rotational items: tanks, containers, etc...Injection molded technical parts and closureInformation provided by Interchim s.r.l., official distributor of Sidi Kerir Petrochemicals Co. (S.. |
|||
Environmental Stress Crack Resistance | >= 200 hour | >= 200 hour | ASTM D1693 cond. B 10% lgepal |
Total 54050 HDPE, blow molding Applications: 55-gallon shipping containers, open-top drums, industrial tanks, agricultural chemical tanks. Blow Molding Stock Temperature 380 – 450 ºF Extrusion melt temperature 400 - 480ºFInfor.. |
|||
Environmental Stress Crack Resistance | 200 hour | 200 hour | ASTM D1693 cond. B 10% lgepal |
Total 8183 HDPE, blow molding Applications: cosmetic bottles, pharmaceutical bottles, industrial product containers, chemical packaging, food packagingInformation provided provided by Total Petrochemicals.Total Petrochemicals ac.. |
|||
Environmental Stress Crack Resistance | >= 200 hour | >= 200 hour | F50, Anatrox 100%; ASTM D1693/B |
Total Lumicene® mPE M 5220 High Density Polyethylene, Blow Molding Lumicene® mPE M 5220 is a high density polyethylene with outstanding organoleptic properties, stress-cracking resistance and processability.Lumicene® mPE M 5220 is especially suited for the produc.. |
|||
Environmental Stress Crack Resistance | >= 200 hour | >= 200 hour | ASTM D1693-70 |
Total Xsene® BM 593 HDPE, blow molding FINATHENE® BM 593 is a new generation of bimodal high density polyethylene based on hexene (C6) as co-monomer and is produced by the ATOFINA Double Loop Technology™. FINATHENE® BM 593 has been es.. |
|||
Environmental Stress Crack Resistance | 200 hour | 200 hour | F50, Condition A, ASTM D1693 |
NOVA Chemicals Sclair® 97B HDPE Blow Molding Resin
(discontinued **) Features: Good impact strength, easy processability, high ESCR.Applications: Small part blow molding, high ESCR HIC applications.Data provided by the manufacturer. |
|||
Environmental Stress Crack Resistance | 200 hour | 200 hour | F-50; 10% Igepal Cond. B; ASTM D-1693 |
ExxonMobil Escorene® HD-8661 HDPE, Rotational Molding Powder
(discontinued **) Data Provided by Exxon Chemical Canada.Characteristics: Fully formulated UV-8 type protection, Higher stiffness & impact strengthUses: Large agricultural tanks, Industrial products |
|||
Environmental Stress Crack Resistance | 200 hour | 200 hour | F50, Condition B; ASTM D-1693 |
ExxonMobil Escorene® HD-8660 LHDPE Rotational Molding Grade
(discontinued **) Data provided by the manufacturer, Exxon Chemical.HD-8600 series are linear high density polyethylene resins that provide outstanding environmental stress crack resistance. HD-8660 is fully formula.. |
|||
Environmental Stress Crack Resistance | 200 hour | 200 hour | F50, Condition B; ASTM D-1693 |
ExxonMobil Escorene® HD-8661 LHDPE Rotational Molding Grade
(discontinued **) Data provided by the manufacturer, Exxon Chemical.HD-8600 series are linear high density polyethylene resins that provide outstanding environmental stress crack resistance. HD-8661 is fully formula.. |
|||
Environmental Stress Crack Resistance | 200 hour | 200 hour | ASTM D1693-70 |
Total Finathene® 53080 HDPE, blow molding, sheet
(discontinued **) Finathene E® 53080 is a high density polyethylene produced by the slurry loop low pressure polymerization process. Finathene E® 53080 has been especially developed for the production of containers.. |
|||
Environmental Stress Crack Resistance | 200 - 200 hour @Temperature 50.0 - 50.0 °C |
200 - 200 hour @Temperature 122 - 122 °F |
Average value: 953 hour Grade Count:4 |
Overview of materials for High Density Polyethylene (HDPE), Extruded This property data is a summary of similar materials in the MatWeb database for the category "High Density Polyethylene (HDPE), Extruded". Each property range of values reported is minimum and maxim.. |
|||
Environmental Stress Crack Resistance | >= 200 hour | >= 200 hour | in OZ-10 |
Kazanorgsintez 153-16 Composition of Low Density Polyethylene, Crack-Proof Production Method: Composition is achieved on the basis of grades 10204-003, 15303-003, 10703-020 and formulas of additives 15, 16, 17, 18, 19, 20, 21, 22, and 23. Application: Intended for prod.. |