Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Tensile Strength at Break | >= 1.38 MPa | >= 200 psi | ASTM D412 |
Parker Chomerics CHO-FORM 5537 EMI Shielding Material Fast Curing Form-in-Place EMI Shielding Material. Cho-Form 5537 is a one component, moisture cured, electrically conductive, form-in-place EMI gasketing material. The formulation contains nickel-pla.. |
|||
Tensile Strength at Break | >= 1.38 MPa | >= 200 psi | ASTM D412 |
Parker Chomerics CHO-SEAL 1278 Conductive Elastomer Conductive Elastomer EMI/EMP GasketsInformation provided by Chomerics |
|||
Tensile Strength at Break | >= 1.38 MPa | >= 200 psi | ASTM D412 |
Parker Chomerics CHO-SEAL 1285 Conductive Elastomer Conductive Elastomer with Improved Corrosion Resistance. This conductive silicone elastomer features significantly improved corrosion resistance in salt spray environments over silver-plated copper-.. |
|||
Tensile Strength at Break | >= 1.38 MPa | >= 200 psi | Base Material; ASTM D412 |
Parker Chomerics CHO-SEAL 1285R Reinforced Conductive Elastomer Seal These materials are fabric-reinforced, silver-plated-aluminum filled EMI seals for airframe shielding applications. These seal materials can also be used to maintain surface electrical continuity at.. |
|||
Tensile Strength at Break | >= 1.38 MPa | >= 200 psi | ASTM D412 |
Parker Chomerics CHO-SEAL 1350 Conductive Elastomer Standard material for high volume injection and compression molding and small extrusions; high performance in non-corrosive environments; used in grounding applications with little or no vibration.R.. |
|||
Tensile Strength at Break | >= 1.38 MPa | >= 200 psi | ASTM D412 |
Parker Chomerics CHO-SEAL 1401 Conductive Elastomer High performance for non-corrosive environments; soft(45 Shore A) for low closure force where gasket geometry cannot be exploited; low tear strength; no fluid resistance. Molded and ExtrudedRoHS Com.. |
|||
Tensile Strength at Break | >= 1.38 MPa | >= 200 psi | ASTM D412 |
Parker Chomerics CHO-SEAL 6309 Extruded Elastomer Commercial Grade Extruded Elastomer. This is an extruded nickel-plated graphite filled silicone elastomer that provides a minimum shielding effectiveness of 75 dB from 100 MHz to 10 GHz. This low co.. |
|||
Tensile Strength at Break | >= 1.38 MPa | >= 200 psi | ASTM D412 |
Parker Chomerics CHO-SEAL E6306 Conductive Elastomer Conductive Elastomer EMI/EMP GasketsInformation provided by Chomerics |
|||
Tensile Strength at Break | >= 1.38 MPa | >= 200 psi | ASTM D412 |
Parker Chomerics CHO-SEAL E6434 Conductive Elastomer Conductive Elastomer EMI/EMP GasketsInformation provided by Chomerics |
|||
Tensile Strength at Break | >= 1.38 MPa | >= 200 psi | ASTM D412 |
Parker Chomerics CHO-SEAL S6305 Conductive Elastomer Good performance in moderately corrosive environments; material of choice for flange finishes needing “bite-through” for good electrical contact.Molded and Extruded.RoHS CompliantInformation provi.. |
|||
Tensile Strength at Break | 1.38 MPa | 200 psi | Type IV, 510 mm/min; ASTM D638 |
PolyOne Geon™ Vinyl Flexible R2495A Polyvinyl Chloride, Flexible (PVC, Flexible) Information provided by PolyOne |
|||
Tensile Strength at Break | >= 1.38 MPa | >= 200 psi | ASTM D412 |
Parker Chomerics CHO-SEAL 1310 Conductive Elastomer Moderate performance in non-corrosive environments, no corrosion or fluid resistance; material of choice for small, delicate injection-molded parts or large dimension extrusionsMolded onlyRoHS Compl.. |
|||
Tensile Strength at Break | 1.38 MPa | 200 psi | |
Shin-Etsu Silicones KE-1871 Silicone, RTV Coating Information Provided by Shin-Etsu Silicones of America, Inc. |
|||
Tensile Strength at Break | 1.38 MPa @Time 7200 sec |
200 psi @Time 2.00 hour |
Die C; ASTM D414 |
STAR Thermoplastic Alloys & Rubbers StarFlex® P 7330-9000 TPE Product Description: StarFlex P 7330-9000 is an easy processing TPE designed for injection molding Features:Soft TouchRubbery FeelGood WeatherabilityFDA and medical grades availableProcessing Method.. |
|||
Tensile Strength at Break | 1.38 MPa | 200 psi | ASTM D412 |
Teknor Apex Monprene® MP-2197 Thermoplastic Elastomer Uses: Closures; Consumer Applications; Gaskets; Handles; Kitchenware; Medical/Healthcare Applications; Packaging; Safety Equipment; Sporting Goods; Toothbrush Handles; Tubing; Writing Instruments Fo.. |
|||
Tensile Strength at Break | >= 1.38 MPa | >= 200 psi | |
Master Bond Super Gel 9AOND Dimensionally Stable Urethane Modified Epoxy Master Bond Super Gel 9AOND is a two component, urethane modified epoxy system that cures at room temperature and has a paste-like consistency. It offers softness and retains dimensional stability. .. |
|||
Tensile Strength at Break | 1.38 MPa | 200 psi | ASTM D638 |
ExxonMobil Escorene™ UL 7711 Ethylene Vinyl Acetate Copolymer Product Description: Escorene Ultra UL 7711 is a very high flow, 26.7% VA copolymer that has very good compatibility with hydrocarbon and natural tackifiers and most waxes. It is suitable for making.. |
|||
Tensile Strength at Break | 1.38 - 1.72 MPa | 200 - 250 psi | |
Abatron AboSeal 8104-8 Polysulfide, Thixotropic Sealant and Caulk AboSeal 8104-8 is a 2-part, 100% solids, thixotropic polysulfide. It comes in brown, black, and other dark colors. It has been made to meet Federal Spec. TT-S-00227-E. It is an architectural standar.. |
|||
Tensile Strength at Break | 1.38 - 1.52 MPa | 200 - 220 psi | |
Abatron AboWeld 8104-12 Polysulfide-Epoxy Sealant and Caulk AboWeld 8104-12 is a 2-part, 100% solids, liquid or filled polysulfide-epoxy. It is available in many colors. It is often used with sand and gravel to mix grouts for filling and resurfacing. It is p.. |
|||
Tensile Strength at Break | 1.38 MPa @Temperature 60.0 °C |
200 psi @Temperature 140 °F |
JRF-14 days |
3M AC-350 Class B-12 Aerospace Sealant 3M Aerospace Sealant AC-350 Class B are fast-cure, intermediate density polysulfide sealant suitable fro fuel tank and fuselage applications. These two-component, manganese dioxide cured sealant are.. |
|||
Tensile Strength at Break | 1.38 MPa @Temperature 60.0 °C |
200 psi @Temperature 140 °F |
JRF-14 days |
3M AC-350 Class B-2 Aerospace Sealant 3M Aerospace Sealant AC-350 Class B are fast-cure, intermediate density polysulfide sealant suitable fro fuel tank and fuselage applications. These two-component, manganese dioxide cured sealant are.. |
|||
Tensile Strength at Break | 1.38 MPa @Temperature 60.0 °C |
200 psi @Temperature 140 °F |
JRF-14 days |
3M AC-350 Class B-6 Aerospace Sealant 3M Aerospace Sealant AC-350 Class B are fast-cure, intermediate density polysulfide sealant suitable fro fuel tank and fuselage applications. These two-component, manganese dioxide cured sealant are.. |
|||
Tensile Strength at Break | 1.38 MPa @Temperature 60.0 °C |
200 psi @Temperature 140 °F |
JRF-14 days |
3M AC-350 Class B-4 Aerospace Sealant 3M Aerospace Sealant AC-350 Class B are fast-cure, intermediate density polysulfide sealant suitable fro fuel tank and fuselage applications. These two-component, manganese dioxide cured sealant are.. |
|||
Tensile Strength at Break | 1.38 MPa | 200 psi | ASTM D4325 |
3M Scotch® 13 Electrical Semi-Conducting Tape Scotch® Electrical Semi-Conducting Tape 13 is a highly conformable, semi-conducting EPR (Ethylene Propylene Rubber) based high-voltage splicing tape. It is non-vulcanizing and shelf stable, with st.. |
|||
Tensile Strength at Break | 1.38 MPa @Temperature 60.0 °C |
200 psi @Temperature 140 °F |
JRF-14 days |
3M AC-350 Class B-1/4 Aerospace Sealant 3M Aerospace Sealant AC-350 Class B are fast-cure, intermediate density polysulfide sealant suitable fro fuel tank and fuselage applications. These two-component, manganese dioxide cured sealant are.. |
|||
Tensile Strength at Break | >= 1.38 MPa | >= 200 psi | ASTM D412 |
Parker Chomerics CHO-SEAL 1215 Conductive Elastomer Resists highest level of EMP induced current; military gasket of choice in non-corrosive environments; excellent processing for molding and extrusion. Molded and ExtrudedRoHS Compliant Information p.. |