Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

Polymer Property : Tensile Strength at Break = 580 psi Product List

Mechanical Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.
Mechanical Properties Metric English Comments
Tensile Strength at Break 4.00 MPa
580 psi
ISO 37
PolyOne OnFlex™ S EH 50A-3S7002 Thermoplastic Elastomer (TPE)
OnFlex™ S EH thermoplastic elastomer compounds are based on hydrogenated styrenic block copolymers. This range of compounds are formulated to deliver a great cost/performance ratio in addition to t..
Tensile Strength at Break 4.00 MPa

@Temperature 23.0 °C
580 psi

@Temperature 73.4 °F
Die C2 hr; ASTM D412
PolyOne Versalloy™ HC 9210-55N Thermoplastic Elastomer (TPE)
Versalloy™ HC 9210-55N is a TPV alloy targeted for injection molding healthcare applications such as disposable medical items, syringe stoppers, and soft-touch overmolding onto surgical grips. Prod..
Tensile Strength at Break 4.00 MPa
580 psi
ASTM D412
Polimeri Europa Europrene® SOL T 6205 Styrene - Butadiene Block Copolymer
Europrene® SOL T 6205 is a radial block copolymer obtained by anionic polymerization. The polymer is based on styrene and butadiene, where bound styrene is 25% weight and diblock content is 15%. ..
Tensile Strength at Break 4.00 - 8.00 MPa
580 - 1160 psi
ASTM D412
Proto3000 Objet Digital Materials™ DM_9885/9785 Rubber-like Prototyping Polymer
Primary material: TangoBlackPlus/TangoPlusSecondary material: VeroWhitePlusDigital Materials are made up of two Objet materials. The two materials are combined in specific concentrations and structu..
Tensile Strength at Break 4.00 MPa
580 psi
50 mm/min; ISO 527
SABIC Innovative Plastics NORYL WCP700 PPE-TPE
Flexible PPE-TPE injection grade suitable for over-molding applications such as plugs, strain relief's, and connectors. Good processability. 70 Shore A hardness.
Tensile Strength at Break 4.00 MPa
580 psi
50 mm/min; ISO 527
SABIC Innovative Plastics NORYL WCP700 PPE-TPE (Europe-Africa-Middle East)
Flexible PPE-TPE injection grade suitable for over-molding applications such as plugs, strain relief's, and connectors. Good processability. 70 Shore A hardness.
Tensile Strength at Break 4.00 MPa
580 psi
Die C; Cross direction; ASTM D412
Teknor Apex Sarlink® 4145 Thermoplastic Elastomer
A highly engineered Thermoplastic Elastomer for use in demanding applications. Sarlink® 4145 is a low hardness grade possessing exceptional tensile strength, superior compression set, chemical re..
Tensile Strength at Break 4.00 MPa
580 psi
ASTM D638
ELASTO UK Dryflex® 400701S SBS Based Material, 70A Hardness, Natural
The 400S-series is a good alternative for indoor applications and disposable articles that do not have high requirements for ageing and heat resistance. The raw materials are specially selected for..
Tensile Strength at Break 4.00 MPa
580 psi
ASTM D638
ELASTO UK Dryflex® 500350S SEBS Based Material, Unfilled Qualities, 35A Hardness, Translucent
The 500-seriesis very favorable when transparency and good scratch resistance are required, as well as when there are high surface finish requirements. Unfilled grades have excellent flow and mecha..
Tensile Strength at Break >= 4.00 MPa
>= 580 psi
(20 in/min), Molded Properties; ASTM D638
ExxonMobil Escorene™ UL 04533EH2 Ethylene Vinyl Acetate Copolymer (European Grade)
Product Description: UL 04533EH2 is a copolymer of ethylene and vinyl acetate.Availability: Africa & Middle East, Asia Pacific and Europe Additive: Antiblock: NoSlip: No Thermal Stabilizer: Yes Fre..
Tensile Strength at Break 4.00 MPa
580 psi
Across Flow; ASTM D412
ExxonMobil Santoprene® 101-45W255 Thermoplastic Elastomer
A soft, black thermoplastic vulcanizate (TPV) in the thermoplastic elastomer (TPE) family. This material is designed for use in residential dishwasher applications and contains a stabilization syste..
Tensile Strength at Break 4.00 MPa
580 psi
Across Flow; ASTM D412 and ISO 37
ExxonMobil Santoprene® 8221-55M300 Thermoplastic Vulcanizate - UV Resistant
Product Description: A soft, colorable, UV resistant thermoplastic vulcanizate (TPV) in the thermoplastic elastomer (TPE) family. This material is designed for automotive interior applications requ..
Tensile Strength at Break >= 4.00 MPa
>= 580 psi
ISO R 527
Fainplast Compounds CRKA 90 Flexible PVC, Flame Retardant Electrical Bedding Lead Free
Bedding non contaminating on XLPE
Tensile Strength at Break 4.00 MPa
580 psi
ISO R 527
Fainplast Compounds GS 30 Flexible PVC, Injection Molding, Lead Free
Scooter handle-bar grip
Tensile Strength at Break 4.00 MPa
580 psi
Beijing Evergrow Resources GFF-3 Glass Fiber Felt
Introduction:By applying high-count fiberglass, GFNF series has the excellent properties such as heat-isolation, fire-resistance, anti-corrosion and heat-preservation. It's the most characteristic a..
Tensile Strength at Break 4.00 MPa
580 psi
ASTM D638
Arkema Group LOTADER® AX 8900 Terpolymer Ethylene - Acrylic Ester - Glycidyl Methacrylate
LOTADER® AX 8900 is a random terpolymer of ethylene, acrylic ester and glycidyl methacrylate, polymerized under high pressure in an autoclave process. Comonomer content is high. Due to its properti..
Tensile Strength at Break 4.00 MPa
580 psi
Across Flow; ASTM D412
ExxonMobil Santoprene® 8211-55M300 Thermoplastic Elastomer  (discontinued **)
A soft, colorable, UV resistant thermoplastic vulcanizate (TPV) in the thermoplastic elastomer (TPE) family. This material is designed for automotive interior applications requiring low fogging and ..
Copyright © lookpolymers.com All Rights Reserved