Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Tensile Strength at Break | 42.1 MPa | 6100 psi | ASTM D638 |
Polymer Resources ABS-GP-HH General Purpose ABS, High Heat General Purpose Acrylonitrile Butadiene Styrene, High HeatProcess: Injection MoldingNotes: All physical, mechanical and thermal testing conducted on 1/8-inch thick, un-pigmented, test samples.Inform.. |
|||
Tensile Strength at Break | 42.1 MPa | 6100 psi | after 16 hours in 50°C water |
Malvern Minerals Thermoplastic Polyester with Novakup® 1250 Silane-Treated Quartz Filler Product data demonstrates the effect of the Novakup (lamellar quartz surface treated with 0.5% A-1100) filler. A separate entry demonstrates the effect of untreated Novacite filler in thermopla.. |
|||
Tensile Strength at Break | 42.1 MPa | 6100 psi | ASTM D638 |
Chase Plastics CP Pryme® NN200STL (DAM) Nylon 66, Super-Toughened, Internally Lubricated Information provided by Chase Plastics. |
|||
Tensile Strength at Break | 42.1 MPa | 6100 psi | vs. steel; 15 s set time |
Elmer's Products Aron Alpha® 101 Cyanoacrylate Adhesive (Industrial Krazy Glue™) Superior tensile and shear strengths, well suited for metal bondingLow gap fill. Methyl base monomer. Excellent on rubber/plastic substrates. Excellent on metal substrates. Poor on porous substr.. |
|||
Tensile Strength at Break | 42.1 MPa | 6100 psi | vs. steel; 50 s set time |
Elmer's Products Aron Alpha® 102 Cyanoacrylate Adhesive (Industrial Krazy Glue™) Superior tensile and shear strengths, well suited for metal bondingMedium gap fill. Methyl base monomer. Excellent on rubber/plastic substrates. Excellent on metal substrates. Poor on porous sub.. |
|||
Tensile Strength at Break | 42.1 MPa | 6100 psi | |
Abatron AboCast 8103-24 High-Performance Dielectric Epoxy AboCast 8103-24 is a dielectric in/outdoor epoxy system with superior arc-track resistance, high voltage and heat resistance, low ash and ion content, and it is chlorine-free. This system has an exc.. |
|||
Tensile Strength at Break | 42.1 MPa | 6100 psi | ASTM D638 |
PlastxWorld CEVIAN® A1500 PA/ABS Alloy, DAM Property data is for dry as molded (DAM) samples.Information provided by PlastxWorld Inc. |
|||
Tensile Strength at Break | 42.1 MPa | 6100 psi | ASTM D638 |
Chesterton MRS 58 Metal Rebuilding System An advanced ceramic composite for the repair and protection of all metal surfaces subjected to erosion, corrosion and chemical attack. It is normally applied at a thickness of 1.5 mm (60 mils) or mo.. |