Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Tensile Strength at Break | 75.0 MPa | 10900 psi | |
Plastcom SLOVALEN PC 19 GF 20 PP, 20% glass fibre, mod. of mech. properties FeaturesModified copolymer PP for iextrusion, chemically reinforced with 20% glass fibre, contains the modifier of mechanical properties. Increased strength in comparison with unfilled PP. Applied i.. |
|||
Tensile Strength at Break | 75.0 MPa | 10900 psi | |
Plastcom SLOVAMID 6 FRM 2 PA6, flame retardant FeaturesDetermined for electrotechnical use. Delivered in natural mode. PA 6 for injection moulding with reduced flammability, with nonhalogen flame retardant. Excellent fluidity of the material pre.. |
|||
Tensile Strength at Break | 75.0 MPa | 10900 psi | ISO 527 |
Nilit FRIANYL B63 KV15 Nylon 6 for injection molding, 15% glass ball reinforced Nylon 6 for injection molding.Information provided by Frisetta Polymer, which merged into Nilit Plastics |
|||
Tensile Strength at Break | <= 75.0 MPa | <= 10900 psi | ISO/R527 |
Polykemi AB SCANAMID 66 A11^ X30 LS Nylon 66, Glass Reinforced, Laser Printable Information provided by Polykemi AB |
|||
Tensile Strength at Break | <= 75.0 MPa | <= 10900 psi | ISO/R527 |
Polykemi AB SCANAMID 66.6 C22^E F Nylon 66/6, Modified Information provided by Polykemi AB |
|||
Tensile Strength at Break | 75.0 MPa @Temperature 23.0 °C |
10900 psi @Temperature 73.4 °F |
ISO 527-2/5 |
PolyOne Bergadur™ PB40 G20 UF UV Polybutylene Terephthalate (PBT) Information provided by PolyOne |
|||
Tensile Strength at Break | 75.0 MPa | 10900 psi | 50 mm/min; ISO 527 |
SABIC Innovative Plastics Lexan® HPS6 PC (Asia Pacific) Med/low flow polycarbonate. For medical devices and pharmaceutical applications. Healthcare management of change, biocompatible (ISO10993 or USP Class VI). EtO, steam e-beam and gamma sterilizable. .. |
|||
Tensile Strength at Break | <= 75.0 MPa | <= 10900 psi | ISO/R527 |
Polykemi AB POLYplex PMMA 700 Acrylic Glass Information provided by Polykemi AB |
|||
Tensile Strength at Break | 75.0 MPa | 10900 psi | ISO 527 |
Nilit RECONYL B KV30 Recycled nylon 6 for injection molding, 30% glass ball reinforced Recycled nylon 6 for injection molding (available only in black).Information provided by Frisetta Polymer, which merged into Nilit Plastics |
|||
Tensile Strength at Break | 75.0 MPa | 10900 psi | ISO 527-1/-2 |
Lanxess Durethan® DP BM 410 H2.0 901510 Nylon 6, 10% Mineral + Glass Fiber PA 6, injection molding grade, 10% glass fibers/mineral, good heat-ageing resistance |
|||
Tensile Strength at Break | 75.0 MPa | 10900 psi | ISO 527-1/-2 |
Lanxess Pocan® KU 1-7625 901510 PBT + PC, 20% Glass Fiber PBT+PC, 20% glass fibers, injection molding, low tendency to warp, improved surface finish |
|||
Tensile Strength at Break | 75.0 MPa | 10900 psi | 5 mm/min; ISO 527 |
SABIC Innovative Plastics LNP LUBRICOMP KFL23LH Acetal Copolymer LNP LUBRICOMP* KFL23LH is a compound based on Acetal Copolymer resin containing 15% Glass Fiber, 10% PTFE. Added features of this material include: Wear Resistant, Low Extractable. |
|||
Tensile Strength at Break | 75.0 MPa @Temperature 80.0 °C |
10900 psi @Temperature 176 °F |
50 mm/min, 1A; ISO 527 |
SABIC Innovative Plastics SABIC STAMAX 40YM240 PP SABIC® STAMAX 40YM240 is a 40% long glass fiber reinforced polypropylene. The glass fibers are chemically coupled to the PP matrix, resulting in high stiffness and strength. The IMDS is 16497161... |
|||
Tensile Strength at Break | 75.0 MPa | 10900 psi | 50 mm/min; ISO 527 |
SABIC Innovative Plastics ULTEM 9075 PEI (Europe-Africa-Middle East) High flow Polyetherimide blend. Meets FAR 25.853 and OSU 65/65 with low toxicity, smoke, and flame evolution. |
|||
Tensile Strength at Break | 75.0 MPa | 10900 psi | Type I, 5 mm/min; ASTM D638 |
SABIC Innovative Plastics ULTEM CRS5011R PEI Enhanced flow Polyetherimide copolymer (Tg 225C) with internal mold release and enhanced chemical resistance to strong acids, bases, aromatics and ketones. ECO Conforming. |
|||
Tensile Strength at Break | 75.0 MPa | 10900 psi | 5 mm/min; ISO 527 |
SABIC Innovative Plastics Ultem HATX200 PEI+PCE High flow Polyetherimide blend. ECO Conforming. For medical devices and pharmaceutical applications. Healthcare management of change, biocompatible (ISO 10993 or USP Class VI), food contact compli.. |
|||
Tensile Strength at Break | 75.0 MPa | 10900 psi | 5 mm/min; ISO 527 |
SABIC Innovative Plastics Ultem LTX300A PEI Copolymer (Europe-Africa-Middle East) High flow Polyetherimide blend with low toxicity, smoke and flame evolution. ECO Compliant, UL94 V0 listing in recognized colors.This data was supplied by SABIC-IP for the Europe-Africa-Middle East.. |
|||
Tensile Strength at Break | 75.0 MPa | 10900 psi | 50 mm/min; ISO 527-1,-2 |
Covestro Makrolon® 3100 Polycarbonate Main characteristics:• High toughness• Good heat resistance• Glass-like transparency, optical quality• High dimensional accuracy and stabilityGrade characteristics:• General purpose• Hig.. |
|||
Tensile Strength at Break | 75.0 MPa | 10900 psi | 50 mm/min; ISO 527-1,-2 |
Covestro Makrolon® FR 7067 Polycarbonate Main characteristics:• High toughness• Good heat resistance• Glass-like transparency, optical quality• High dimensional accuracy and stabilityGrade characteristics:• Flame retardant• Med.. |
|||
Tensile Strength at Break | 75.0 MPa @Temperature 80.0 °C |
10900 psi @Temperature 176 °F |
ASTM Test |
BASF Petra® 130 FR BK-112 30% Glass Filled PET Petra 130 FR BK-112 is a 30% glass fiber reinforced, black pigmented, flame retardant injection molding compound based on post-consumer and post-industrial recycle polyethylene erephthalate feedstoc.. |
|||
Tensile Strength at Break | 75.0 MPa | 10900 psi | ISO 527-2 |
Ascend Performance Materials Vydyne® R513H Nylon 66, 13% Glass Filled, Conditioned (2.5% Moisture) Vydyne® R513H is general-purpose, 13% glass-reinforced, heat stabilized PA66 resin. Available in natural, it is an injection-molding grade resin that is lubricated for machine feed, flow, and mold .. |
|||
Tensile Strength at Break | 75.0 MPa | 10900 psi | 5mm/min; ISO 527-2 |
BASF Ultrason S 2010 PSU Ultrason S 2010 is an unreinforced, medium viscosity standard injection molding PSU grade. It flows readily and offers outstanding heat resistance and dimensional stability. It conforms to FDA req.. |
|||
Tensile Strength at Break | 75.0 MPa | 10900 psi | Conditioned; ISO R 527 |
Addiplast Addinyl PMD 20117 Flame Retardant Nylon, Glass Filled Flame retardant, glass fiver reinforced, friction resistantInformation provided by Addiplast. |
|||
Tensile Strength at Break | 75.0 MPa @Temperature 130 - 150 °C, Time 7.20e+7 sec |
10900 psi @Temperature 266 - 302 °F, Time 20000 hour |
5 [mm/min], 50% Loss of Tensile Strength; ICE 216 |
Akro-Plastic Akromid® B3 GF 20 (2470) PA 6 Dry, 20% Glass Filled AKROMID® B (Polyamide 6) is an engineering compound, characterized by high mechanical strength, stiffness and thermal resistance. Furthermore, this polyamide offers high toughness at low temperatur.. |
|||
Tensile Strength at Break | 75.0 MPa | 10900 psi | TD |
BASF Ultramid® B36 LN 0.04 mm Cast Film Cold Chillroll Product comes in 2-2.5 mm round pellets.Information provided by BASF |
|||
Tensile Strength at Break | 75.0 MPa | 10900 psi | ISO 527-2 |
Ascend Performance Materials Vydyne® 20NSP1 Nylon 66, DAM Availability:Asia PacificEuropeNorth AmericaAdditive:LubricantNucleating Agent Features: Fast Molding CycleGeneral PurposeGood Mold ReleaseGood StiffnessHigh RigidityLubricatedNucleatedUses:Bearings.. |
|||
Tensile Strength at Break | 75.0 MPa | 10900 psi | ASTM D638 |
SABIC Innovative Plastics LNP LUBRICOMP DFL329 PC LNP LUBRICOMP* DFL329 is a compound based on Polycarbonate resin containing 10% Glass Fiber, 15% PTFE. Added features of this material include: Flame Retardant, Internally Lubricated. |
|||
Tensile Strength at Break | 75.0 MPa | 10900 psi | |
LATI Latilub 88/50-20T PEEK, PTFE Filled Self-lubricating product based on Polyetheretherketone (PEEK). PTFE. Availability: Africa & Middle East; Asia Pacific; Europe; Latin America; North AmericaInformation provided by Lati Industria Ter.. |
|||
Tensile Strength at Break | 75.0 MPa | 10900 psi | ISO 527 |
Grupo Repol Dinalon® B2S35 V2-7035 PA6 High Viscosity, V2 Halogen Free, RAL 7035 Mechanical properties for Dry As Molded samplesInformation provided by Grupo Repol |