Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Tensile Strength at Break | 82.7 MPa | 12000 psi | ASTM D638 |
Polymer Resources NY66-MD02 Nylon, 2% Molybdenum disulfide for lubrication and wear (DAM) Process: Injection MoldingNotes: All physical, mechanical and thermal testing conducted on 1/8-inch thick, un-pigmented, test samples. Nylon grades are tested dry as molded (DAM).Information provide.. |
|||
Tensile Strength at Break | 82.7 MPa | 12000 psi | 5.1 mm/min; ASTM D638 |
PolyOne Edgetek® X PS-154200101 WHITE Polybutylene Terephthalate (PBT) Information provided by PolyOne |
|||
Tensile Strength at Break | 82.7 MPa | 12000 psi | ASTM D638 |
Polymer Resources NY66-MD02-[color]-H Nylon, 2% Molybdenum disulfide for lubrication and wear, Heat Stabilized (DAM) Process: Injection MoldingNotes: All physical, mechanical and thermal testing conducted on 1/8-inch thick, un-pigmented, test samples. Nylon grades are tested dry as molded (DAM).Information provide.. |
|||
Tensile Strength at Break | 82.7 MPa | 12000 psi | ASTM D638 |
Polymer Resources NY66-MD2 Nylon 66, 2% MoS2 Nylon 66, 2% Molybdenum Disulfide for Lubrication and WearProcess: Injection MoldingNotes: All physical, mechanical and thermal testing conducted on 1/8-inch thick, un-pigmented, test samples. Nylon.. |
|||
Tensile Strength at Break | 82.7 MPa | 12000 psi | ASTM D638 |
Polymer Resources PC/ABS-G30 General Purpose PC/ABS Alloy, 30% Glass Filled PC/ABS Alloy, General Purpose, 30% Glass FilledProcess: Injection MoldingNotes: All physical, mechanical and thermal testing conducted on 1/8-inch thick, un-pigmented, test samples.Information provi.. |
|||
Tensile Strength at Break | 82.7 MPa | 12000 psi | ASTM D638 |
Ravago Manufacturing Americas Hylon® N1000EL Nylon 6/6 (DAM)
(discontinued **) Information provided by Ravago |
|||
Tensile Strength at Break | 82.7 MPa | 12000 psi | ASTM D638 |
Sumitomo Bakelite North America RX® 1366FR-P Short-Glass Reinforced Diallyl Phthalate Short glass fiber reinforced, flame retardant, diallyl ortho-phthalate molding compound which meets the requirements of ASTM D5948 Type SDG-F.Information provided by Vyncolit, a Sumitomo Bak Group |
|||
Tensile Strength at Break | 82.7 MPa | 12000 psi | ASTM D638 |
A. Schulman SCHULAMID® 66 MF40 Mineral Filled Nylon 66 Information provided by A. Schulman. |
|||
Tensile Strength at Break | >= 82.7 MPa | >= 12000 psi | |
Master Bond EP42HT-2 Epoxy Adhesive Resists Sterilization Description: Master Bond Polymer System EP42HT-2 is a room temperature curable, two component epoxy adhesive, sealant, coating and casting material featuring high temperature resistance along with o.. |
|||
Tensile Strength at Break | 82.7 MPa | 12000 psi | ASTM D638 |
PlastxWorld CEVIAN® A2603 15% GF PA/ABS Alloy, DAM Property data is for dry as molded (DAM) samples.These are typical values and are not intended for specification purposes. UL approved file No. is E47773. Information provided by PlastxWorld Inc. |