Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Tensile Strength, Yield | 110 MPa @Strain 0.200 %, Temperature 300 °C |
16000 psi @Strain 0.200 %, Temperature 572 °F |
EN min.; EN 10002-5 |
Outokumpu 4301 Cr-Ni Austenitic Stainless Steel General purpose steel with good corrosion resistance.Applications: Wide variety of applications in construction, chemical, petroleum, automobile, and domestic appliance markets.Available in hot roll.. |
|||
Tensile Strength, Yield | 110 MPa @Strain 0.200 %, Temperature 500 °C |
16000 psi @Strain 0.200 %, Temperature 932 °F |
EN min.; EN 10002-5 |
Outokumpu 4432 Cr-Ni-Mo Austenitic Stainless Steel General purpose steel with excellent corrosion resistance, particularly in the presence of halides.Applications: FiltersBraiding for hydraulic hosesShaftsFastenersMarine componentsAvailable in hot r.. |
|||
Tensile Strength, Yield | 110 MPa @Temperature -40.0 °C |
16000 psi @Temperature -40.0 °F |
50%RH; ASTM D638 |
DuPont Performance Polymers Zytel® 101 NC010 Nylon 66
(Unverified Data**) Zytel® 101 NC010 is a general purpose polyamide 66 resin for injection molding and extrusion.Information provided by DuPont Performance Polymers |
|||
Tensile Strength, Yield | 110 MPa @Thickness 1.57 mm |
16000 psi @Thickness 0.0620 in |
CW; ASTM D638 |
Industrial Laminates/Norplex NP842 Paper Base Laminate
(discontinued **) Description: Paper reinforced phenolic grade with controlled conductivity. Mechanical strength similar to NP611. NP842 is semi-conductive on the surfaces and through the laminate.Thickness Tested: 0.. |
|||
Tensile Strength, Yield | 110 MPa @Thickness 1.57 mm |
16000 psi @Thickness 0.0620 in |
CW; ASTM D638 |
Industrial Laminates/Norplex NP610 Paper Base Laminate Description: Phenolic paper based grade for mechanical applications. Good tensile, compressive and flexural strength. Primarily a machining material, but may be hot punched up to .093" thick.Thickne.. |
|||
Tensile Strength, Yield | 110 MPa @Thickness 1.10 - 1.60 mm, Temperature 982 °C |
16000 psi @Thickness 0.0433 - 0.0630 in, Temperature 1800 °F |
0.2% offset |
Haynes Hastelloy® S alloy, flat products Nickel-based, high temperature alloy. Excellent thermal stability, low thermal expansion, excellent oxidation resistance to 1093°C, good high temperature and thermal fatigue strength. Application.. |
|||
Tensile Strength, Yield | >= 110 MPa @Strain 0.200 %, Thickness 150 - 500 mm |
>= 16000 psi @Strain 0.200 %, Thickness 5.91 - 19.7 in |
Temper 03 |
Constellium Alumold® 110 Aluminum Cast Sliced Plate Alumold®-110 has been specifically developed for low–pressure processing (thermoforming, RTM) of plastics and their composites. The material can also be used for prototype injection moulds. The ma.. |
|||
Tensile Strength, Yield | >= 110 MPa @Strain 0.200 %, Thickness 500 - 600 mm |
>= 16000 psi @Strain 0.200 %, Thickness 19.7 - 23.6 in |
Temper 03 |
Constellium Alumold® 110 Aluminum Cast Sliced Plate Alumold®-110 has been specifically developed for low–pressure processing (thermoforming, RTM) of plastics and their composites. The material can also be used for prototype injection moulds. The ma.. |
|||
Tensile Strength, Yield | >= 110 MPa @Strain 0.200 %, Thickness 150 - 500 mm |
>= 16000 psi @Strain 0.200 %, Thickness 5.91 - 19.7 in |
Temper O3 |
Constellium Fibral® Cast Aluminum Sliced Plate Fibral® has been specifically developed for low–pressure processing (thermoforming, RTM) of plastics and their composites. The material can also be used for prototype injection moulds. The materia.. |
|||
Tensile Strength, Yield | >= 110 MPa @Strain 0.200 %, Thickness 500 - 600 mm |
>= 16000 psi @Strain 0.200 %, Thickness 19.7 - 23.6 in |
Temper O3 |
Constellium Fibral® Cast Aluminum Sliced Plate Fibral® has been specifically developed for low–pressure processing (thermoforming, RTM) of plastics and their composites. The material can also be used for prototype injection moulds. The materia.. |
|||
Tensile Strength, Yield | >= 110 MPa @Strain 0.200 %, Thickness 80.0 - 100 mm |
>= 16000 psi @Strain 0.200 %, Thickness 3.15 - 3.94 in |
Tempers O/H111; Standard EN 485-2 |
Constellium Planoxal® 50 Aluminum plate Planoxal®-50 plates differ from other standard EN-AW 5083 alloy products by their low level of residual stress. This specialty plate is also suitable for decorative anodizing. Planoxal®-50 is main.. |