- HOME
- POLYMER SEARCH
- Polymer Property : Tensile Strength, Yield = 50800 psi
Polymer Property : Tensile Strength, Yield = 50800 psi Product List
Mechanical PropertiesTips: 30 items are displayed at most. For the rest of the results, please contact customer service.
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Tensile Strength, Yield | 350 MPa @Strain 1.00 %, Temperature -80.0 °C |
50800 psi @Strain 1.00 %, Temperature -112 °F |
EN min.; EN 10002-5 |
| Outokumpu 4301 Cr-Ni Austenitic Stainless Steel General purpose steel with good corrosion resistance.Applications: Wide variety of applications in construction, chemical, petroleum, automobile, and domestic appliance markets.Available in hot roll.. |
|||
| Tensile Strength, Yield | 350 MPa @Strain 0.200 %, Temperature -80.0 °C |
50800 psi @Strain 0.200 %, Temperature -112 °F |
EN min.; EN 10002-5 |
| Outokumpu 4311 Cr-Ni Austenitic Stainless Steel Applications: Wet corrosion resistance and general service.Available in hot rolled plate (Quarto), hot rolled strip/sheet (CPP), cold rolled strip/sheet, cold rolled narrow strip, bar, and rod forms.. |
|||
| Tensile Strength, Yield | 350 MPa @Strain 0.200 % |
50800 psi @Strain 0.200 % |
EN min.,RT; EN 10002-1 |
| Outokumpu 4318 Cr-Ni Austenitic Stainless Steel Applications: Wet corrosion resistance and general service.Available in hot rolled strip/sheet (CPP) and cold rolled strip sheet forms. |
|||
| Tensile Strength, Yield | 350 MPa @Strain 0.200 % |
50800 psi @Strain 0.200 % |
EN min.,RT; EN 10002-1 |
| Outokumpu 4372 Cr-Ni Austenitic Stainless Steel Applications: Wet corrosion resistance and general service.Available in hot rolled strip/sheet (CPP), cold rolled strip/sheet, cold rolled narrow strip, and rod forms. |
|||
| Tensile Strength, Yield | 350 MPa @Strain 0.200 %, Temperature -196 °C |
50800 psi @Strain 0.200 %, Temperature -321 °F |
EN min.; EN 10002-5 |
| Outokumpu 4401 Cr-Ni-Mo Austenitic Stainless Steel General purpose steel with excellent corrosion resistance, particularly in the presence of halides.Applications: FiltersBraiding for hydraulic hosesShaftsFastenersMarine componentsAvailable in hot r.. |
|||
| Tensile Strength, Yield | 350 MPa @Strain 0.200 %, Temperature -196 °C |
50800 psi @Strain 0.200 %, Temperature -321 °F |
EN min.; EN 10002-5 |
| Outokumpu 4404 Cr-Ni-Mo Austenitic Stainless Steel General purpose steel with excellent corrosion resistance, particularly in the presence of halides.Applications: FiltersBraiding for hydraulic hosesShaftsFastenersMarine componentsAvailable in hot r.. |
|||
| Tensile Strength, Yield | 350 MPa @Strain 0.200 % |
50800 psi @Strain 0.200 % |
Outokumpu Typical,Hot Rolled Plate (Quarto); EN 10002-1 |
| Outokumpu 4429 Cr-Ni-Mo Austenitic Stainless Steel Applications: Wet corrosion resistance and general service.Available in hot rolled plate (Quarto), cold rolled strip/sheet and rod forms. |
|||
| Tensile Strength, Yield | 350 MPa @Strain 0.200 %, Temperature -196 °C |
50800 psi @Strain 0.200 %, Temperature -321 °F |
EN min.; EN 10002-5 |
| Outokumpu 4432 Cr-Ni-Mo Austenitic Stainless Steel General purpose steel with excellent corrosion resistance, particularly in the presence of halides.Applications: FiltersBraiding for hydraulic hosesShaftsFastenersMarine componentsAvailable in hot r.. |
|||
| Tensile Strength, Yield | 350 MPa @Strain 0.200 %, Temperature -196 °C |
50800 psi @Strain 0.200 %, Temperature -321 °F |
EN min.; EN 10002-5 |
| Outokumpu 4435 Cr-Ni-Mo Austenitic Stainless Steel Applications: Wet corrosion resistance and general service.Available in hot rolled plate (Quarto), hot rolled strip/sheet (CPP), cold rolled strip/sheet, cold rolled narrow strip, bar, and rod forms.. |
|||
| Tensile Strength, Yield | 350 MPa @Strain 0.200 %, Temperature -196 °C |
50800 psi @Strain 0.200 %, Temperature -321 °F |
EN min.; EN 10002-5 |
| Outokumpu 4436 Cr-Ni-Mo Austenitic Stainless Steel General purpose steel with excellent corrosion resistance, particularly in the presence of halides.Applications: FiltersBraiding for hydraulic hosesShaftsFastenersMarine componentsAvailable in hot r.. |
|||
| Tensile Strength, Yield | 350 MPa @Strain 1.00 % |
50800 psi @Strain 1.00 % |
Outokumpu Typical,Hot Rolled Plate (Quarto); EN 10002-1 |
| Outokumpu 4439 Austenitic Stainless Steel Applications: Wet corrosion resistance and general service.Available in hot rolled plate (Quarto), hot rolled strip/sheet (CPP), and cold rolled strip/sheet forms. |
|||
| Tensile Strength, Yield | 350 MPa @Strain 0.200 %, Temperature 100 °C |
50800 psi @Strain 0.200 %, Temperature 212 °F |
EN min.; EN 10002-5 |
| Outokumpu 4565 High Performance Austenitic Stainless Steel Applications: Process equipment in chemical industryBleaching equipment in the pulp and paper industryFlue-gas cleaningDesalinationSeawater handlingHeat exchangersAvailable in hot rolled plate (Quar.. |
|||
| Tensile Strength, Yield | 350 MPa @Strain 0.200 %, Temperature -196 °C |
50800 psi @Strain 0.200 %, Temperature -321 °F |
EN min.; EN 10002-5 |
| Outokumpu 4571 Cr-Ni-Mo Austenitic Stainless Steel Very good corrosion resistance, weldable, and resistant to sensitization.Available in hot rolled plate (Quarto), hot rolled strip/sheet (CPP), cold rolled strip/sheet, cold rolled narrow strip, bar,.. |
|||
| Tensile Strength, Yield | 350 MPa @Strain 1.00 % |
50800 psi @Strain 1.00 % |
Outokumpu Typical,Hot Rolled Plate (Quarto); EN 10002-1 |
| Outokumpu 4713 High Temperature Ferritic Stainless Steel Does not form brittle phases but should only be exposed to moderately corrosive atmospheres due to low chromium content.Applications: Mostly used in high temperature applications with sulphurous atm.. |
|||
| Tensile Strength, Yield | >= 350 MPa @Temperature 20.0 °C |
>= 50800 psi @Temperature 68.0 °F |
|
| PEAK Werkstoff DISPAL S226 Aluminum Alloy, AlSi30CuMg, Condition T6 Heat Treatment Condition T6 (Quench in water at RT)abrasive stabilityhigh stiffness (E-modulus)resistance even at high temperaturesgood grindabilityPEAK DISPAL materials allow the manufacturing of p.. |
|||
| Tensile Strength, Yield | 350 MPa @Strain 1.00 % |
50800 psi @Strain 1.00 % |
Typical |
| Industeel CLC 17.12.2 L 2% Mo Containing 18 Cr –10 Ni Austenitic Stainless Steel Description: CLC 17-12-2L is one of the basic grade of the stainless steels range. 2% Molybdenum bearing ensures better corrosion resistance than CLC 18-9 L grade, particularly regarding to uniform .. |
|||
| Tensile Strength, Yield | 350 MPa @Strain 0.200 % |
50800 psi @Strain 0.200 % |
Typical after Solution Annealing |
| Industeel SIRIUS S15 Rare Earth Containing Heat Resistant Steel CLI SIRIUS S15 grade is a fully austenitic stainless steel containing 21 Cr, 1.7 Si, 0.17 N and Rare Earth elements (Cerium, Lanthanum,...etc) which make the alloy particularly well designed for hig.. |
|||
| Tensile Strength, Yield | >= 350 MPa @Strain 1.00 % |
>= 50800 psi @Strain 1.00 % |
|
| Industeel URANUS® B26 6 Mo High Performance Super-Austenitic Stainless Steel with PREN = 43 Description: URANUS® B26 (UR B26) is a 25% Ni, 20% Cr, 6% Mo superaustenitic stainless steel grade with 0.2 % nitrogen additions, particularly designed for high structural stability and high corr.. |
|||
| Tensile Strength, Yield | >= 350 MPa @Strain 0.200 %, Thickness 127 - 152.4 mm |
>= 50800 psi @Strain 0.200 %, Thickness 5.00 - 6.000 in |
Tempers T651 / T652 |
| Constellium Alumold® 400 Aluminum The Alumold®-400 alloy has been optimized to provide good shape stability and high strength properties throughout the plate thickness. Typical applications include blow moulds, thermoforming moulds.. |
|||
| Tensile Strength, Yield | >= 350 MPa @Strain 0.200 %, Thickness 400 - 450 mm |
>= 50800 psi @Strain 0.200 %, Thickness 15.7 - 17.7 in |
long-transverse direction |
| Constellium Alumold® 500 Forged Aluminum Forged thick blocks in Alumold® 500 have been developed to provide high and consistent strength across the thickness, good dimensional stability and excellent machinability, in order to respond to .. |
|||
| Tensile Strength, Yield | >= 350 MPa @Strain 0.200 %, Thickness 400 - 450 mm |
>= 50800 psi @Strain 0.200 %, Thickness 15.7 - 17.7 in |
Temper T652 |
| Constellium Certal® SPC Forged Aluminum Certal® SPC forged has been optimized to provide excellent machinability, good shape stability and high strength properties throughout the plate thickness. Uniform strength is an important property.. |
|||
| Tensile Strength, Yield | >= 350 MPa @Strain 0.200 %, Thickness 5.90 - 15.0 mm |
>= 50800 psi @Strain 0.200 %, Thickness 0.232 - 0.591 in |
Temper T651 |
| Constellium Unidal® High-Strength Rolled Precision Aluminum Plate, Milled Both Sides Unidal® precision plates offers a combination of dimensional stability and high mechanical strength. The very low internal stress reduces the risk of deformation during machining, thereby reducing .. |
|||
| Tensile Strength, Yield | 350 MPa @Strain 0.200 %, Temperature 100 °C |
50800 psi @Strain 0.200 %, Temperature 212 °F |
Typical annealed sample; short time elevated temp. |
| American Utility Metals Cromgard® Stainless Steel Cromgard is a low cost stainless steel, which is able to provide benefits of good weldability and formability, making it capable of fabrication by conventional techniques. It provides the benefits o.. |
|||
| Tensile Strength, Yield | 350 MPa @Strain 0.200 % |
50800 psi @Strain 0.200 % |
Typical |
| Aleris Weldural Aluminum Alloy, 100 mm Thickness Sample treatment not specified for property data.Applications include precise mechanical parts with high dimensional stability, machine components, molds, and refrigeration engineering. Good weldab.. |
|||
| Tensile Strength, Yield | 350 MPa @Strain 0.200 %, Temperature 150 °C |
50800 psi @Strain 0.200 %, Temperature 302 °F |
EN min.; EN 10002-5 |
| Outokumpu LDX 2101® Duplex Stainless Steel Applications: Pulp and paper industryDesalination plantsFlue-gas cleaningCargo tanks and pipe systems in chemical tankersSeawater systemsFirewalls and blast walls on offshore platformsBridgesCompone.. |
|||
Copyright © lookpolymers.com All Rights Reserved