Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Film Tensile Strength at Yield, MD | 32.0 MPa | 4640 psi | ISO 527 |
Premix Thermoplastics PRE-ELEC® PET 1451 PRE-ELEC PET 1451 is a conductive thermoplastic compound based on PETG. Conductivity is achieved by using special conductive carbon black. In addition to a low electrical resistivity PRE-ELEC PET 14.. |
|||
Film Tensile Strength at Yield, MD | 32.0 MPa | 4640 psi | ISO 1184 |
SIDPEC EGYPTENE® HD 5301 FB HDPE Film Applications:Strong thin filmCarrier bagGrocery sacksFilm properties were measured on 15 micron film extruded at a blow up ratio of 5:1, 8D neck height.Information provided by Interchim s.r.l., offi.. |
|||
Film Tensile Strength at Yield, MD | 32.0 MPa | 4640 psi | parallel; ISO 527-3 |
DSM Akulon® F127 PA6 Low/Medium Viscosity, Film Extrusion |
|||
Film Tensile Strength at Yield, MD | 32.0 MPa | 4640 psi | parallel; ISO 527-3 |
DSM Akulon® F132 PA6 Film Extrusion, High Viscosity |
|||
Film Tensile Strength at Yield, MD | 32.0 MPa | 4640 psi | parallel; ISO 527-3 |
DSM Akulon® F132-C1 PA6 Film Extrusion, High Viscosity, Lubricated |
|||
Film Tensile Strength at Yield, MD | 32.0 MPa | 4640 psi | parallel; ISO 527-3 |
DSM Akulon® F234-C PA6 Film Extrusion, High Viscosity, Lubricated |
|||
Film Tensile Strength at Yield, MD | 32.0 MPa | 4640 psi | parallel; ISO 527-3 |
DSM Akulon® F128 PA6 Film Extrusion, Medium Viscosity |
|||
Film Tensile Strength at Yield, MD | 32.0 MPa | 4640 psi | ASTM D882 |
ExxonMobil Escorene® HDZ-128 MMW-HDPE Blown Film Resin
(discontinued **) Data provided by the manufacturer, Exxon Chemical.Can be processed on high stalk, pocket extrusion or cast lines. Films made from HDZ-128 exhibit an excellent stiffness balance. High thermal stabi.. |