Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Tensile Strength, Yield | 12.0 MPa | 1740 psi | ISO 527 |
Polimeri Europa Riblene® MP 31 Low Density Polyethylene - Injection Molding Riblene MP 31 is a medium fluidity low density polyethylene resin (LDPE), with added slip agent.Parts made by Riblene MP 31 are characterized by a medium rigidity.Main Applications: Riblene MP 31 i.. |
|||
Tensile Strength, Yield | 12.0 MPa | 1740 psi | ISO 527 |
Polimeri Europa Riblene® MR 30 Low Density Polyethylene - Injection Molding Riblene MR 30 is a high fluidity low density polyethylene resin (LDPE) characterized by a high flowability and a medium rigidity.Parts made with Riblene MR 30 are characterized by good mechanical an.. |
|||
Tensile Strength, Yield | 12.0 MPa | 1740 psi | ASTM D412 |
Precision Polymer Engineering N75L Nitrile Rubber Nitrile Butadiene Rubber (NBR), 65-75 °IRHD. Ultra-Low acrylonitrile (ACN) content. Copolymer of acrylonitrile and butadiene. To meet ASTM D2000/SAE J200 line call-out: MBF710, B34, F19.Application.. |
|||
Tensile Strength, Yield | 12.0 MPa | 1740 psi | ASTM D412 |
Precision Polymer Engineering R70D Natural Rubber Natural Rubber, 65-75 °IRHD. Formulated to Defence Standard 93-30, Type QX, Grade 70 (NRQX70).Applications: Natural rubber offers low compression set, high tensile strength, high resilience and ex.. |
|||
Tensile Strength, Yield | 12.0 MPa | 1740 psi | ASTM D412 |
Precision Polymer Engineering V70H Fluoroelastomer Compound Fluoroelastomer Rubber, 66-75 °IRHD. Copolymer of vinylidene fluoride and hexafluoropropylene. Formulated using only those ingredients determined by the United States Federal Food and Drug Administ.. |
|||
Tensile Strength, Yield | 12.0 MPa | 1740 psi | ASTM D412 |
Precision Polymer Engineering V70Q Fluoroelastomer Compound Black, Fluoroelastomer Rubber, 66-75 °IRHD. Copolymer of vinylidene fluoride and hexafluoropropylene. ASTM designation = FKM. ISO designation = FPM. Formulated using only those ingredients determi.. |
|||
Tensile Strength, Yield | 12.0 MPa | 1740 psi | ASTM D638 |
Petroquimica Triunfo Trithene® TS 7006 LDPE - Coextruded Film The Trithene TS 7006 resin is a low-density polyethylene (LDPE) with high molecular weight and very good clarity. The unique combination of good processability, bubble stability, gloss, and strength.. |
|||
Tensile Strength, Yield | 12.0 MPa | 1740 psi | ISO 527 |
Polimeri Europa Riblene® MP 30 Low Density Polyethylene - Injection Molding Riblene MP 30 is a medium fluidity low density polyethylene resin (LDPE).Parts made by Riblene MP 30 are characterized by a medium rigidity.Main Applications: Riblene MP 30 is suitable for injectio.. |
|||
Tensile Strength, Yield | 12.0 MPa | 1740 psi | |
Chevron Phillips 7105T LLDPE Sheeting Resin
(discontinued **) Resin Type: Sheeting Resin for the Geomembrane Market; ASTM D 4976 Classification: PE 214, A 35307Applications:Blown Geomembrane Applications, Sanitary Landfill Liners, Waste Water Reservoir Contain.. |
|||
Tensile Strength, Yield | 12.0 MPa | 1740 psi | ASTM D638 |
ExxonMobil Escorene® LL-5102 LLDPE Compounding Resin
(discontinued **) Data provided by the manufacturer, Exxon Chemical.A linear low density polyethylene resin designed to provide good processability and ease of blending. The granular form of LL-5102 makes for effici.. |
|||
Tensile Strength, Yield | 12.0 MPa | 1740 psi | ISO 527 |
Total Lacqtene® FD 0270 LDPE, blown film, compounding, injection molding
(discontinued **) Low density radical polyethylene made by high pressure process. Temperature profile (°C) for injection molding: 200 to 260Information provided provided by Total Petrochemicals.Total Petrochemicals .. |
|||
Tensile Strength, Yield | 12.0 MPa | 1740 psi | ASTM D638 |
Huntsman PE5032 Extrusion Coating Polyethylene
(discontinued **) Homopolymer and FDA compliant.Features: Excellent draw down, low neck-in, excellent heat sealability, good adhesion, low smoking, no edge weave, and excellent printability.Applications: Extrusion: c.. |
|||
Tensile Strength, Yield | 12.0 MPa | 1740 psi | 9.8 in/min; ASTM D638 |
Teknor Apex Sinvicomp SIM 5515 Polyvinyl Chloride, Flexible Availability: Asia Pacific Features: High Strength Uses: Electrical/Electronic Applications < Forms: Pellets Processing Method: Injection MoldingInformation Provided by Teknor Apex |
|||
Tensile Strength, Yield | 12.0 MPa | 1740 psi | |
Trelleborg B568 High Quality Nitrile Rubber Nitrile rubber or acrylonitrile-butadiene rubber is a copolymer of butadiene and acrylonitrile.PropertiesGood general resistance to oils.Good mechanical properties especially tensile strength, flexi.. |
|||
Tensile Strength, Yield | 12.0 MPa | 1740 psi | ASTM-D638 |
Polyram RamOfin PPC371B73 Polypropylene, 73% Mineral Filled 73% mineral filled polypropylene for heavy density injection molding applicationsInformation provided by Polyram Ram On Ind. |
|||
Tensile Strength, Yield | 12.0 MPa | 1740 psi | 50 mm/min |
Eastman Ecdel PCCE 9965 Copolyester Ether Elastomer ISO data as provided by the manufacturer, Eastman Chemical |
|||
Tensile Strength, Yield | 12.0 MPa | 1740 psi | 2 in/min, Type IV bar; ASTM D638 |
Chevron Phillips Marlex® K203 LLDPE Sheet Extrusion Resin Type: Hexene CopolymerCharacteristics: Outstanding ESCRBroad fusion rangeExcellent melt strengthGood processabilityExcellent flexibilityImproved output and texturingApplications: Coextruded ca.. |
|||
Tensile Strength, Yield | 12.0 MPa | 1740 psi | Across Flow; ASTM D638 |
ExxonMobil Santoprene® 103-50 Thermoplastic Elastomer A hard, black, versatile thermoplastic vulcanizate (TPV) in the thermoplastic elastomer (TPE) family. This material combines good physical properties and chemical resistance for use in a wide range .. |
|||
Tensile Strength, Yield | 12.0 MPa | 1740 psi | Across Flow; ASTM D638 |
ExxonMobil Santoprene® 203-50 Thermoplastic Elastomer A hard, colorable, versatile thermoplastic vulcanizate (TPV) in the thermoplastic elastomer (TPE) family. This material combines good physical properties and chemical resistance for use in a wide ra.. |
|||
Tensile Strength, Yield | 12.0 MPa | 1740 psi | ASTM-D638 |
Braskem LD5000A LDPE Blow Molding Polyethylene LD5000A is a low-density polyethylene with good mechanical properties, good ESCR, and excellent sealing characteristics. It does not contain additives. It is used in general purpose blow molded arti.. |
|||
Tensile Strength, Yield | 12.0 - 19.0 MPa | 1740 - 2760 psi | ASTM D638 |
Arkema Group KYNAR FLEX® 2500-20 Polyvinylidene Fluoride Copolymer - Extrusion & Molding Characteristics: Natural resin - translucent, off-white hemispheres. Highest flexibility. High stability in harsh thermal, chemical and ultraviolet environments. High toughness and mechanical st.. |
|||
Tensile Strength, Yield | 12.0 MPa | 1740 psi | ASTM-D638 |
Braskem EG0921 LDPE Blow Molding Polyethylene EG0921 is a low-density polyethylene with good mechanical properties and environmental stress cracking resistance (ESCR) and excellent sealability. It is used in blow molded parts and medium-resista.. |
|||
Tensile Strength, Yield | 12.0 MPa | 1740 psi | ASTM-D638 |
Braskem ML2400N LLDPE Injection Molding Polyethylene The resin ML2400N is a linear low-density polyethylene, 1-butene based, with good flexibility and low warpage. It does not contain a slip agent. It does have narrow molecular weight distribution. Th.. |
|||
Tensile Strength, Yield | 12.0 MPa | 1740 psi | ISO R 527 |
Addiplast Addilene H 420 K24 Polypropylene Homopolymer High densityInformation provided by Addiplast. |
|||
Tensile Strength, Yield | 12.0 MPa | 1740 psi | ASTM D638 |
Huntsman PE2072 Injection Molding Polyethylene
(discontinued **) Homopolymer and FDA compliant.Features: Very high flow rapid set-up characteristics, excellent clarity, gloss, and stiffness.Applications: Injection molding: lids and difficult to fill applications... |
|||
Tensile Strength, Yield | 12.0 MPa | 1740 psi | |
Trelleborg B643 High Quality Nitrile Rubber Nitrile rubber or acrylonitrile-butadiene rubber is a copolymer of butadiene and acrylonitrile.PropertiesGood general resistance to oils.Good mechanical properties especially tensile strength, flexi.. |
|||
Tensile Strength, Yield | 12.0 MPa | 1740 psi | |
Trelleborg B644 High Quality Nitrile Rubber Nitrile rubber or acrylonitrile-butadiene rubber is a copolymer of butadiene and acrylonitrile.PropertiesGood general resistance to oils.Good mechanical properties especially tensile strength, flexi.. |
|||
Tensile Strength, Yield | 12.0 MPa | 1740 psi | |
BASF Novolen® 2900 NC Polypropylene Injection molded partsData was collected by ISO methods and provided by BASF. |
|||
Tensile Strength, Yield | 12.0 MPa | 1740 psi | ASTM D638 |
Huntsman PE2062 Injection Molding Polyethylene
(discontinued **) Homopolymer and FDA compliant.Features: High flow characteristics combined with good glossApplications: Injection molding: large moldings including housewares and toys.FDA Notes: Conforms to FDA reg.. |
|||
Tensile Strength, Yield | 12.0 - 117 MPa @Temperature -40.0 - 120 °C |
1740 - 17000 psi @Temperature -40.0 - 248 °F |
Average value: 56.9 MPa Grade Count:8 |
Overview of materials for Nylon 6, Impact Grade This property data is a summary of similar materials in the MatWeb database for the category "Nylon 6, Impact Grade". Each property range of values reported is minimum and maximum values of appropri.. |