Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Tensile Strength, Yield | 88.0 MPa @Temperature 23.0 °C |
12800 psi @Temperature 73.4 °F |
DAM; ISO 527 |
DuPont Performance Polymers Zytel® 101L BKB009 Nylon 66
(Unverified Data**) Zytel® 101L BKB009 is a lubricated polyamide 66 resin for injection molding.Information provided by DuPont Performance Polymers |
|||
Tensile Strength, Yield | 88.3 MPa @Thickness 3.20 mm |
12800 psi @Thickness 0.126 in |
50mm/min; ASTM D638 |
LG Chemical LUPOS GP2300 ABS+GF30%, General Purpose Feature: Injection Molding, ABS+GF30%, General PurposeApplication: Electric & Electronic (Housing, Components)CAS No. 9003-54-7, 9003-56-9 and 65997-17-3Information provided by LG Chemical |
|||
Tensile Strength, Yield | 88.3 MPa @Thickness 3.20 mm |
12800 psi @Thickness 0.126 in |
5mm/min; ASTM D638 |
LG Chemical LUPOY GP5100 PC/ABS+GF10% Description: Injection Molding, PC/ABS+GF10%, General Purpose, GF ReinforcedApplication: Electrical Appliance Housing, Automotive I/PCAS: 103598-77-2, 9003-56-9 and 65997-17-3Information provided by.. |
|||
Tensile Strength, Yield | 88.0 MPa | 12800 psi | ASTM D638 |
SABIC Innovative Plastics LNP LUBRICOMP EL003 PEI (Asia Pacific) LNP LUBRICOMP* EL003 is a compound based on Polyetherimide resin containing PTFE. Added features of this material include: Internally Lubricated. |
|||
Tensile Strength, Yield | 88.0 MPa | 12800 psi | ASTM D638 |
SABIC Innovative Plastics LNP LUBRICOMP EL003 PEI (Europe-Africa-Middle East) LNP LUBRICOMP* EL003 is a compound based on Polyetherimide resin containing PTFE. Added features of this material include: Internally Lubricated. |
|||
Tensile Strength, Yield | 88.0 MPa | 12800 psi | ASTM D638 |
SABIC Innovative Plastics LNP LUBRICOMP GFL36L PSU (Asia Pacific) LNP* Lubricomp* GFL36L is a compound based on Polysulfone resin containing Glass Fiber, PTFE. Added features of this material include: Internally Lubricated, Low Extractible. |
|||
Tensile Strength, Yield | 88.0 MPa | 12800 psi | ISO 527 |
SABIC Innovative Plastics LNP LUBRICOMP KCL34A Acetal Homopolymer LNP* LUBRICOMP* KCL34A is a compound based on Acetal Homopolymer resin containing 15% PTFE, 20% Carbon Fiber. Added features of this material include: Wear Resistant, Electrically Conductive. |
|||
Tensile Strength, Yield | 88.0 MPa | 12800 psi | ISO 527 |
SABIC Innovative Plastics LNP LUBRICOMP KCL34A Acetal Homopolymer (Asia Pacific) LNP* Lubricomp* KCL34A is a compound based on Acetal Homopolymer resin containing PTFE, Carbon Fiber. Added features of this material include: Internally Lubricated, Electrically Conductive. |
|||
Tensile Strength, Yield | 88.0 MPa | 12800 psi | Type I, 5 mm/min; ASTM D 638 |
SABIC Innovative Plastics LNP Lubricomp KFL36XXC Acetal Copolymer (Europe-Africa-Middle East) LNP* Lubricomp* KFL36 is an Acetal containing Glass Fiber and PTFE.This data was supplied by SABIC-IP for the Europe-Africa-Middle East region. |
|||
Tensile Strength, Yield | 88.0 MPa | 12800 psi | Type I, 5 mm/min; ASTM D638 |
SABIC Innovative Plastics ULTEM D9065 PEI (Asia Pacific) Polyetherimide blend. Meets FAR 25.853 and OSU 65/65 with low toxicity, smoke, and flame evolution. ECO Conforming. |
|||
Tensile Strength, Yield | 88.0 MPa | 12800 psi | 50 mm/min; ISO 527 |
SABIC Innovative Plastics LNP THERMOCOMP J1000ER PES (Europe-Africa-Middle East) LNP* THERMOCOMP* J1000ER is a compound based on Polyethersulfone resin. Added features include : Easy Molding, Mold Release |
|||
Tensile Strength, Yield | 88.3 MPa | 12800 psi | 5 mm/min; ASTM D638 |
Samsung Cheil Industries Starex® GR-4020 ABS, 20% Glass Filled Information provided by Samsung Cheil Industries. |
|||
Tensile Strength, Yield | 88.3 MPa | 12800 psi | 5 mm/min; ASTM D638 |
Samsung Cheil Industries Starex® VG-4920 ABS, Glass Filled FR Information provided by Samsung Cheil Industries. |
|||
Tensile Strength, Yield | 88.3 MPa | 12800 psi | 5 mm/min; ASTM D638 |
Samsung Cheil Industries Starex® GR-4020L ABS, Glass Filled ABS/GF material that is used in printer LBP fuserInformation provided by Samsung Cheil Industries. |
|||
Tensile Strength, Yield | 88.3 MPa | 12800 psi | ASTM D638 |
Samyang Tribit® 1500GN15 Polybutylene Terephthalate, 15% Glass Reinforced, Flame Retardant Characteristics:G/F reinforcedFlame retardantHeat and Impact resistantApplications:AutomotiveConnectorGearOutdoor handleIgnition systemElectronicConnectorGas valveCoil bobbinSwitch caseRelay caseO/A.. |
|||
Tensile Strength, Yield | 88.3 MPa | 12800 psi | ASTM D638 |
Samyang Trirex® 3025G10 Polycarbonate, 10% Glass Reinforced TRIREX® polycarbonate resins offer superior transparency, mechanical properties, good dimensional stability and high electrical performance, which allows it to be widely used for electrical, elec.. |
|||
Tensile Strength, Yield | 88.0 MPa | 12800 psi | ASTM D638 |
SABIC Innovative Plastics LNP THERMOCOMP ZF0049 PPE+PS (Asia Pacific) LNP* Thermocomp* ZF0049 is a compound based on PPE+PS Blend resin containing Flame Retardant. Added features of this material include: Flame Retardant. |
|||
Tensile Strength, Yield | 88.0 MPa | 12800 psi | Type I, 10 mm/min; SABIC - Japan Method |
SABIC Innovative Plastics NORYL GFN2 PPE+HIPS (Asia Pacific) PPE+PS blend. 20% Glass reinforced. FDA compliance (restrictions apply). Low water absorption. Hydrolytic stability. Dimensional stability. Suitable for fluid engineering applications including pump.. |
|||
Tensile Strength, Yield | 88.0 MPa | 12800 psi | ISO 527 type 1 A |
Solvay TECHNYL® A 217 PA66, DRY Description: TECHNYL ® A 217 is an unreinforced polyamide 66, heat stabilized, standard viscosity, for injection molding. It is available in black color.Benefits: This product offers all the prim.. |
|||
Tensile Strength, Yield | 88.0 MPa | 12800 psi | 5 mm/min; ISO 527 |
SABIC Innovative Plastics ULTEM 9085 PEI Blend High flow Polyetherimide blend. Meets FAR 25.853 and OSU 65/65 with low toxicity, smoke and flame evolution. |
|||
Tensile Strength, Yield | 88.3 MPa | 12800 psi | ASTM D638 |
Techmer ES Luriblend® POM CO AF15 Availability: North AmericaForms: PelletsAdditive: Aramid Resin Lubricant(15%)Features: Lubricated, Copolymer, Good Wear Resistance and Low FrictionInformation provided by TP Composites, Inc. |
|||
Tensile Strength, Yield | 88.3 MPa | 12800 psi | 5 mm/min; ASTM D638 |
Samsung Cheil Industries Infino® NH-3204G PC, Glass Filled FR Information provided by Samsung Cheil Industries. |
|||
Tensile Strength, Yield | 88.3 MPa | 12800 psi | 5 mm/min; ASTM D638 |
Samsung Cheil Industries Starex® GR-4020L ABS, Glass Filled ABS/GF material that is used in printer LBP fuserInformation provided by Samsung Cheil Industries. |
|||
Tensile Strength, Yield | 88.0 MPa | 12800 psi | 5 mm/min; ISO 527 |
SABIC Innovative Plastics NORYL GTX GTX4610 PPE+PA Noryl GTX* GTX4610 resin is a high performance, 10% glass filled blend of PPE/PA that exhibits an excellent balance of non-halogenated flame retardance, dimensional stability, high heat resistance, .. |
|||
Tensile Strength, Yield | 88.0 MPa | 12800 psi | D638 |
Zhejiang Juner 301-G15 15% Glass Fibre Reinforced and Flammable Resistant Applications: Electrons and Electricity: TV Components, Plugs of Computers, Exhaust Fans of Computers, Plugs, Sockets, Shells of Electronics, Framework of Level Output Transformers, Pipe Pedestals, .. |
|||
Tensile Strength, Yield | 88.3 MPa | 12800 psi | ASTM D638 |
Cheng Yu Plastic N66C2 Nylon 66, 20% Mineral Reinforced |
|||
Tensile Strength, Yield | 88.0 MPa | 12800 psi | 50 mm/min; ISO 527 |
CP-Polymer-Technik Wellamid® 6000 HWCP Nylon 6, Heat Stabilized, Dry Information provided by CP-Polymer-Technik GmbH & Co. KG |
|||
Tensile Strength, Yield | 88.0 MPa | 12800 psi | ISO 527-2 |
Ascend Performance Materials Vydyne® 21SPF BLK Nylon 66, Conditioned Vydyne® 21SPF BLK is a, general-purpose PA66 resin used for extrusion-compounding. Available in black, it is designed principally for injection-molding fabrication. This grade offers a well-balance.. |
|||
Tensile Strength, Yield | 88.0 MPa | 12800 psi | dry; ISO 527-1/-2 |
DSM Novamid® 1013PL1 NAT PA6-MX Injection Molding |