Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Tensile Strength, Yield | 10.0 MPa | 1450 psi | ASTM D412 |
Precision Polymer Engineering E50Q Ethylene Propylene Rubber Peroxide cured, Ethylene Propylene Terpolymer, 46-55 °IRHD. Terpolymer of ethylene, propylene and diene monomers. Complies with FDA code of Federal regulations title CFR21 section 177.2600. Water .. |
|||
Tensile Strength, Yield | 10.0 MPa | 1450 psi | ASTM D412 |
Precision Polymer Engineering E65K Ethylene Propylene Rubber Peroxide cured, Ethylene Propylene Terpolymer (EPT), 50-70 °IRHD. Terpolymer of ethylene, propylene and diene monomers. Specially formulated for sealing sulphur hexafluoride (SF6) gas in electric.. |
|||
Tensile Strength, Yield | 10.0 MPa | 1450 psi | ASTM D412 |
Precision Polymer Engineering E70B Ethylene Propylene Rubber General purpose, Ethylene Propylene Rubber, 65-75 °IRHD. Terpolymer of ethylene, propylene and diene monomers.Applications: Excellent water and steam resistance with good compression set propertie.. |
|||
Tensile Strength, Yield | 10.0 MPa | 1450 psi | ASTM D412 |
Precision Polymer Engineering E80K Ethylene Propylene Rubber General purpose, peroxide cured, Ethylene Propylene Terpolymer, 75-85 °IRHD. Terpolymer of ethylene, propylene and diene monomers. To meet ASTM D2000/SAE J200 line call-out MCA810, A25, B35, F17... |
|||
Tensile Strength, Yield | 10.0 MPa | 1450 psi | ASTM D412 |
Precision Polymer Engineering E90Q Ethylene Propylene Rubber Peroxide cured, Ethylene Propylene Terpolymer, 85-95 °IRHD. Terpolymer of ethylene, propylene and diene monomers. Formulated using only those ingredients determined by the United States Federal Fo.. |
|||
Tensile Strength, Yield | 10.0 MPa | 1450 psi | ASTM D412 |
Precision Polymer Engineering N70F Nitrile Rubber Nitrile Butadiene Rubber (NBR), 65-75 °IRHD. Copolymer of acrylonitrile and butadiene. Formulated using only those ingredients determined by the United States Federal Food and Drug Administration .. |
|||
Tensile Strength, Yield | 10.0 MPa | 1450 psi | ASTM D412 |
Precision Polymer Engineering N80L Nitrile Rubber Nitrile Butadiene Rubber, 75-85 °IRHD. Low acrylonitrile (ACN) content. Copolymer of acrylonitrile and butadiene. To meet ASTM D2000 line call-out M6BG814, A14, B14, EO14, EO34, F17.Applications: T.. |
|||
Tensile Strength, Yield | 10.0 MPa | 1450 psi | ASTM D412 |
Precision Polymer Engineering Q90B Polyurethane Rubber Peroxide cured, Polyurethane Rubber, 85-95 °IRHD. Polyester-based urethane. To meet ASTM line call-out M5BG910, B14, EO14, EO34. ASTM & ISO designation = AU.Applications: Excellent abrasion resis.. |
|||
Tensile Strength, Yield | 10.0 MPa | 1450 psi | ASTM D412 |
Precision Polymer Engineering V60E Fluoroelastomer Compound Litharge Incorporated, Green Fluoroelastomer Rubber, 55-65 °IRHD. Copolymer of vinylidene fluoride and hexafluoropropylene. To meet ASTM D2000 line call-out M2HK610, A1-10, B38, EF31, EO78, F15, Z.. |
|||
Tensile Strength, Yield | 10.0 MPa | 1450 psi | ASTM D412 |
Precision Polymer Engineering V60G Fluoroelastomer Compound Green Fluoroelastomer Rubber, 56-65 °IRHD. Copolymer of vinylidene fluoride and hexafluoropropylene. To meet ASTM D2000 line call-out M2HK610, A1-10, B38, EF31, EO78, F15, Z1. Where Z1 = colour gr.. |
|||
Tensile Strength, Yield | 10.0 MPa | 1450 psi | ASTM D412 |
Precision Polymer Engineering Z75R Hydrogenated NBR Compound Red Hydrogenated Nitrile Rubber, 70-80 °IRHD. Medium acrylonitrile (ACN) content. ASTM designation = HNBR. ASTM D2000 line call-out 2MDH708, A26, B36, EO16, EO36, F14, Z1. Z1 = hardness 75 ±5.Ap.. |
|||
Tensile Strength, Yield | 10.0 MPa | 1450 psi | ASTM D412 |
Precision Polymer Engineering V60L Fluoroelastomer Compound Special steam resistant, Fluoroelastomer Rubber, 55-65 °IRHD. Copolymer of vinylidene fluoride and hexafluoropropylene. To meet ASTM D2000 line call-out: M2HK610, A1-10, B37, B38, EF31, EO78, F15.. |
|||
Tensile Strength, Yield | 10.0 MPa | 1450 psi | ASTM D638 |
SABIC M200024 Linear Low Density Polyethylene for Injection Molding Product Description: M200024 is a Linear Low Density Polyethylene grade with a narrow molecular weight distribution suitable for injection molding applications. It has been designed to give good f.. |
|||
Tensile Strength, Yield | 10.0 MPa | 1450 psi | ASTM D638 |
Huntsman PE 1008 Film Extrusion Polyethylene
(discontinued **) Homopolymer, and FDA compliant.Features: Superior strength, good machinability, and heat seal characteristics.Applications: Film extrusion: industrial packaging, frozen food, produce bags, shrink, a.. |
|||
Tensile Strength, Yield | 10.0 MPa | 1450 psi | |
LyondellBasell Lupolen® 2452 D SW 413 LDPE Cable sheathingData was collected by ISO methods and originally provided by BASF. The Lupolen® product line is now produced by Basell. |
|||
Tensile Strength, Yield | 10.0 MPa | 1450 psi | |
Kraton® D1102 + LDPE blend (2/98) Blending KRATON D and G polymers with PE significantly improves the toughness at both room and low temperatures. KRATON polymers are block segments of styrene and rubber monomers (A-B, A-B-A, or [A.. |
|||
Tensile Strength, Yield | 10.0 MPa | 1450 psi | 2"/min; ASTM D638 |
A. Schulman CP763-01 Extruded, Blow Molding and Injection Molding Grade Polyethylene DescriptionCP 763-01 is an extruded, blow molding, and injection molding grade of low density polyethylene having good processability and heat sealability. ApplicationCP 763-01 meets the specificat.. |
|||
Tensile Strength, Yield | 10.0 MPa | 1450 psi | |
Trelleborg B545 High Quality Nitrile Rubber Nitrile rubber or acrylonitrile-butadiene rubber is a copolymer of butadiene and acrylonitrile.PropertiesGood general resistance to oils.Good mechanical properties especially tensile strength, flexi.. |
|||
Tensile Strength, Yield | 10.0 MPa | 1450 psi | |
Trelleborg R448 Natural Rubber Polyisoprene All information provided by Trelleborg |
|||
Tensile Strength, Yield | 10.0 MPa | 1450 psi | |
Trelleborg R449 Natural Rubber Polyisoprene All information provided by Trelleborg |
|||
Tensile Strength, Yield | 10.0 MPa | 1450 psi | At 50 mm/min; ISO 527-2 |
Borealis Daplen™ AK4504 TPO Compound Daplen AK4504 is a 30% mineral and elastomer modified polypropylene compound intended for injection molding. Daplen AK4504 is a material with excellent impact/stiffness ratio. Thanks to its low th.. |
|||
Tensile Strength, Yield | 10.0 MPa | 1450 psi | 2 in/min, Type IV bar; ASTM D-638 |
Chevron Phillips Marlex® C101 Polyethylene; Enhanced Metallocene linear low density polyethylene. This linear low density, hexene copolymer is tailored for blow molded containers that require: High glossGood clarityExcellent ESCR Applications: Typi.. |
|||
Tensile Strength, Yield | 10.0 MPa | 1450 psi | ASTM D638 |
Braskem PB 208 LDPE Injection Molding Polyethylene Description: PB208 is a low density polyethylene with no additives. This grade shows excellent processability being indicated for low viscosity required applications. Injection molded products with .. |
|||
Tensile Strength, Yield | 10.0 MPa | 1450 psi | ASTM D638 |
Huntsman PE2050 Injection Molding Polyethylene
(discontinued **) Homopolymer and FDA compliant.Features: High flow characteristics, good gloss, and processability.Applications: Injection molding: large moldings including housewares and toys.FDA Notes: Conforms to.. |
|||
Tensile Strength, Yield | 10.0 MPa | 1450 psi | ASTM D638 |
Huntsman PE6010 Blow Molding Polyethylene
(discontinued **) Homopolymer, Drug Master File listed product, complies with USP Classification VI, and FDA compliant.Features: Meets exacting requirements of blow molded containers and processes well with parison s.. |
|||
Tensile Strength, Yield | 10.0 - 14.0 MPa | 1450 - 2030 psi | Average value: 11.2 MPa Grade Count:4 |
Overview of materials for Low Density Polyethylene (LDPE), Sheet/Profile extrusions This property data is a summary of similar materials in the MatWeb database for the category "Low Density Polyethylene (LDPE), Sheet/Profile extrusions". Each property range of values reported is mi.. |
|||
Tensile Strength, Yield | 10.0 - 22.8 MPa | 1450 - 3300 psi | Average value: 17.9 MPa Grade Count:45 |
Overview of materials for Linear Low Density Polyethylene (LLDPE), Rotational Molding Grade This property data is a summary of similar materials in the MatWeb database for the category "Linear Low Density Polyethylene (LLDPE), Rotational Molding Grade". Each property range of values report.. |
|||
Tensile Strength, Yield | 10.0 - 23.0 MPa | 1450 - 3340 psi | Average value: 13.3 MPa Grade Count:9 |
Overview of materials for Linear Low Density Polyethylene (LLDPE), Compounding Resin This property data is a summary of similar materials in the MatWeb database for the category "Linear Low Density Polyethylene (LLDPE), Compounding Resin". Each property range of values reported is m.. |
|||
Tensile Strength, Yield | 10.0 MPa | 1450 psi | ASTM-D638 |
Polyram RamOfin PPC370B73 Polypropylene, 73% Mineral Filled 73% mineral filled polypropylene for heavy density injection molding applicationsInformation provided by Polyram Ram On Ind. |
|||
Tensile Strength, Yield | 10.0 MPa | 1450 psi | ASTM D638 |
Huntsman PE1203 EVA Film Extrusion
(discontinued **) 2% Vinyl Acetate EVA copolymer and FDA compliantFeatures: High clarity film with good stiffness and low temperature toughness.Applications: Film extrusion: food packaging, general purpose packaging .. |