Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Tensile Strength, Yield | 15.2 MPa | 2200 psi | ASTM D638 |
Multibase Multi-Pro® 3011 CHI Polypropylene Calcium Carbonate Filler, 30% by weight.Forms:PelletsProcessing Methods:Injection MoldingInformation provided by Multibase |
|||
Tensile Strength, Yield | 15.2 MPa | 2200 psi | Type IV, 510 mm/min; ASTM D638 |
PolyOne Geon™ Vinyl Wire & Cable JJK501L Polyvinyl Chloride, Flexible (PVC, Flexible) Information provided by PolyOne |
|||
Tensile Strength, Yield | 15.2 MPa | 2200 psi | Type IV, 510 mm/min; ASTM D638 |
PolyOne Geon™ Vinyl Wire & Cable W1104L-xx60FRDUV Polyvinyl Chloride, Flexible (PVC, Flexible) Typical Properties of Molded Slab (0.075); Not to be Construed as Specifications. Provisional Product Information - Physical and Mechanical properties based on initial production.Information provide.. |
|||
Tensile Strength, Yield | 15.2 MPa | 2200 psi | Type IV, 510 mm/min; ASTM D638 |
PolyOne Geon™ Vinyl Wire & Cable W1820L Polyvinyl Chloride, Flexible (PVC, Flexible) Typical Properties of Molded Slab (0.075); Not to be Construed as Specifications.Information provided by PolyOne |
|||
Tensile Strength, Yield | 15.2 MPa | 2200 psi | Type IV, 510 mm/min; ASTM D638 |
PolyOne Geon™ Vinyl Wire & Cable W3400 Polyvinyl Chloride, Flexible (PVC, Flexible) Typical Properties of Molded Slab (0.075); Not to be Construed as Specifications.Information provided by PolyOne |
|||
Tensile Strength, Yield | 15.2 MPa | 2200 psi | Type IV, 510 mm/min; ASTM D638 |
PolyOne Geon™ Vinyl Wire & Cable WR7426L Polyvinyl Chloride, Flexible (PVC, Flexible) Typical Properties of Molded Slab (0.075); Not to be Construed as Specifications. Provisional Product Information - Physical and Mechanical properties based on initial production.Information provide.. |
|||
Tensile Strength, Yield | 15.2 MPa | 2200 psi | Type IV, 510 mm/min; ASTM D638 |
PolyOne Geon™ Vinyl Wire & Cable WY66AL Polyvinyl Chloride, Flexible (PVC, Flexible) Typical Properties of Molded Slab (0.075); Not to be Construed as Specifications.Information provided by PolyOne |
|||
Tensile Strength, Yield | 15.2 MPa | 2210 psi | ASTM D412 |
Polymax® Maxelast® P3893 TPE, PP Overmold or Standalone use Polymax's TPE material complies with UL, VDE, FDA, RoHS and PAH's standards.Uses:Consumer ProductsToys & NoveltiesAuto PartsTool Hand GripsSporting GoodsWire & Cable ElectronicsMedical DevicesPlasti.. |
|||
Tensile Strength, Yield | 15.2 MPa | 2200 psi | -5% change after 72 hours @ 250°C; ASTM D412 |
Precision Polymer Engineering V95X Fluoroelastomer Compound Fluoroelastomer Rubber, 88 - 97 °IRHD. Copolymer of vinylindene fluoride and hexafluoropropylene. Gas-blister resistant fluoroelastomer rubber.Applications: Developed for oil field applications wh.. |
|||
Tensile Strength, Yield | 15.2 MPa | 2200 psi | Rate of 50 mm/min; ASTM D 638 |
NOVA Chemicals Surpass® IFs730-R Octene sMDPE Food Packaging Lid Resin IFs730-R complies with the U.S. FDA regulations for olefin polymers and may thus be used in the United States as an article or component of an article intended for use in contact with food.NOVA Chem.. |
|||
Tensile Strength, Yield | 15.2 MPa | 2200 psi | Type IV, 510 mm/min; ASTM D638 |
PolyOne Geon™ Vinyl Wire & Cable WJKC302LR Polyvinyl Chloride, Flexible (PVC, Flexible) Typical Properties of Molded Slab (0.075); Not to be Construed as Specifications.Information provided by PolyOne |
|||
Tensile Strength, Yield | 15.2 MPa | 2200 psi | ASTM D638 |
Resirene Resirene® READ 9500 Ignition Resistant Impact Polystyrene Features:High FlowIgnition ResistantNo Pre-drying RequiredHigh ImpactColors AvailableApplications:Injection MoldingDark ColorsTV CabinetsElectronic EquipmentInformation provided by US distributor Ca.. |
|||
Tensile Strength, Yield | 15.2 MPa | 2200 psi | |
TSE Industries Millathane® CM Millable Polyether Urethane Rubber with 60 PHR Suprex Clay Filler MILLATHANE CM is a sulfur and peroxide curable polyether urethane rubber. Its outstanding property is its great resistance to abrasion, which makes it of special interest for articles that are subje.. |
|||
Tensile Strength, Yield | 15.2 MPa | 2200 psi | ASTM D638 |
LyondellBasell Purell® PE3020D Low Density Polyethylene, Injection Molding, Blow Fill & Seal, Extrusion Blow Molding Purell PE 3020 D is a low density polyethylene with high rigidity, good opticals and good chemical resistance. It is delivered in pellet form. Target markets are small blow molding including packagi.. |
|||
Tensile Strength, Yield | 15.2 MPa | 2200 psi | ASTM D412 |
Teknor Apex APEX® 3310-80 Polyvinyl Chloride, Flexible Material Status-Commercial: ActiveAvailability-North AmericaTest Standards Available-ASTMFeatures-Sterilizable, RadiationUses-Automotive Applications, Food Service Applications, General Purpose, Med.. |
|||
Tensile Strength, Yield | 15.2 MPa | 2200 psi | 100%; ASTM D412 |
Teknor Apex APEX® 3311-90 Polyvinyl Chloride, Flexible Material Status-Commercial: ActiveAvailability-North AmericaTest Standards Available-ASTM Uses-Automotive Applications, Food Service Applications, General Purpose, Medical Applications, Profiles, To.. |
|||
Tensile Strength, Yield | >= 15.2 MPa | >= 2200 psi | Stress at Elongation M100; ASTM D412 Method A |
Seals Eastern 7182B Fluorocarbon-Elastomer Formulated AFLAS® high-temperature, high-pressure "sour" oil & gas service. ED resistant. Excellent acid and base resistance.Information provided by Seals Eastern, Inc. |
|||
Tensile Strength, Yield | 15.2 MPa | 2200 psi | Longitudinal |
Saint-Gobain Norton® Fluorglas® Chemfilm® R128/R129 Premium Grade Extruded Full Density PTFE Film (0.004" thick) Description: Full Density Unsintered Tape is used as primary insulation for high-temperature wires, jackets and cables and wall for convoluted hose. It meets the requirements of component insulation.. |
|||
Tensile Strength, Yield | 15.2 MPa | 2200 psi | 2"/min; ASTM D638 |
A. Schulman POLYAXIS® RLLP621 Flame Retardant, High Density Polyethylene Information provided by A. Schulman. |
|||
Tensile Strength, Yield | 15.2 MPa | 2200 psi | 2"/min; ASTM D638 |
A. Schulman POLYAXIS® RLLP621 Flame Retardant, High Density Polyethylene Information provided by A. Schulman. |
|||
Tensile Strength, Yield | 15.2 MPa | 2200 psi | 2 in per min; ASTM D638; Test specimens were injection molded by ASTM D1897. |
Chevron Phillips K-Resin® XK40 Styrene-Butadiene Copolymer, Sheet Grade Styrene-Butadiene CopolymerCustomer Benefits: XK40 is an extrusion grade SBC designed specifically for superior performance in blends with general purpose polystyrene. Compared to KK38, KX40 offers.. |
|||
Tensile Strength, Yield | 15.2 MPa | 2200 psi | ASTM D638 |
ExxonMobil LDPE LD 380BA Wire & Cable Low Density Polyethylene Resin (European Grade) Product Description: LD 380BA is a non-stabilized LDPE, designed for the production of Low Voltage power cable insulation using the two-step silane cross-linking technology. Sufficient antioxidant a.. |
|||
Tensile Strength, Yield | 15.2 MPa | 2200 psi | 2.0 in/min; ASTM D638 |
ExxonMobil LLDPE LL 8360.29 Linear Low Density Polyethylene Resin Product Description: LL 8360 is a linear low density hexene copolymer designed to offer excellent processability along with outstanding dimensional control and low warpage. This resin is ideally sui.. |
|||
Tensile Strength, Yield | 15.2 MPa | 2200 psi | ASTM D-638 |
Axiall 971 Wire & Cable Flexible PVC Matte-finish, CL2 jacket compound rated for 90°C applications.Information provided by Georgia GulfGeorgia Gulf became Axiall Corporation in 2013. |
|||
Tensile Strength, Yield | 15.2 MPa | 2200 psi | ASTM D-638 |
Axiall 12840 Coax & Telecom Flexible PVC Non-lead stabilized CATV coaxial cable jacket. Also suitable for CL2 applications.Information provided by Georgia GulfGeorgia Gulf became Axiall Corporation in 2013. |
|||
Tensile Strength, Yield | 15.2 MPa | 2200 psi | ASTM D-638 |
Axiall 16780 Wire & Cable Flexible PVC 90C matte finish, vinyl elastomer.Information provided by Georgia GulfGeorgia Gulf became Axiall Corporation in 2013. |
|||
Tensile Strength, Yield | 15.2 MPa | 2200 psi | ASTM D-638 |
Axiall 19730 Wire & Cable Flexible PVC Electrical grade 105°C rated vinyl elastomer compound suitable for SEO and SJEO insulation and jacket applications per UL 62.Information provided by Georgia GulfGeorgia Gulf became Axiall Corporati.. |
|||
Tensile Strength, Yield | 15.2 MPa | 2200 psi | 50 mm/min cross speed; ASTM D638 |
DuPont™ Surlyn® 7940 Ionomer Resin, Lithium Surlyn® 7940 thermoplastic resin is an advanced ethylene/methacrylic acid (E/MAA) copolymer, in which the MAA acid groups have been partially neutralized with lithium ions. The amount of MAA and ne.. |
|||
Tensile Strength, Yield | 15.2 - 31.0 MPa | 2200 - 4500 psi | ASTM D638 |
Alcoa KAMA 3200 Prime High Impact Polystyrene
(discontinued **) CapabilitiesGauge: .007” to .060” (178 to 1524µm)Width: 12” to 62” (304 to 1575mm)Core Size: 6” standard cores, 3” and 8” availableRoll O.D.: 29” standard, up to 40” availableSilicone trea.. |
|||
Tensile Strength, Yield | 15.2 MPa | 2200 psi | ASTM D-638 |
Axiall 50898 Moldings & Extrusions Flexible PVC Migration resistant, flexible PVC compound recommended for injection molding and extrusion applications.Information provided by Georgia GulfGeorgia Gulf became Axiall Corporation in 2013. |