Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Tensile Strength, Yield | 23.0 MPa | 3340 psi | ASTM D638 |
Rotuba M Cellulose Acetate Property values at 50% RH.Data provided by the manufacturer. |
|||
Tensile Strength, Yield | 23.0 MPa | 3340 psi | 2.0 in/min; 0.125" thickness; ASTM D-638 |
Chevron Phillips MD6800 HIPS - High Impact Polystyrene
(discontinued **) Rubber modified high impact polystyrene.Applications:Displays and retail product shelvingDurable household applicationsThin to medium thickness parts that require a combination of high flow and good.. |
|||
Tensile Strength, Yield | 23.0 MPa | 3340 psi | ASTM D638 |
Flint Hills AP6120-HS Impact Copolymer Polypropylene High impact copolymer, UL certified, and FDA compliant. Features: Heat stabilizedApplications: Injection molding: appliance components, automotive interior trim, and consumer durables.Former Huntsma.. |
|||
Tensile Strength, Yield | 23.0 MPa | 3340 psi | ASTM D638 |
Global PP-2512-H Polypropylene Block Copolymer Description-opacity, medium to high stiffness, high impact strength at low temperatureApplications-special for wire & cable, telecom insulationInformation provided by Global Polymers Corporation. |
|||
Tensile Strength, Yield | 23.0 MPa | 3340 psi | ASTM D638 |
Global PP-2540-K Polypropylene Block Copolymer Description-opacity, medium to high stiffness, high impact strength at low temperatureApplications-paint drum, storage & transport containerInformation provided by Global Polymers Corporation. |
|||
Tensile Strength, Yield | 23.0 MPa | 3340 psi | 2 in/min.; ASTM D638 |
Ineos A4040 HDPE Ineos HDPE A4040 is a high density polyethylene copolymer produced using a supported catalyst process. It is a copolymer resin used mainly for the extrusion of crosslinked pipes according to the sil.. |
|||
Tensile Strength, Yield | 23.0 MPa | 3340 psi | ASTM D638 |
IRPC Polimaxx Polene BM3245 PC High Density Polyethylene CHARACTERISTICS:GOOD EXTRUDABILITYHIGH PRESSURE PIPE FOLLOW-UP MINIMUM REQUIRED STRENGTH OF 10.0 MPa (DESIGN STRESS OF 8.0 MPa) CLASSIFICATION PE100BLACK COLOR COMPOUNDAPPLICATIONS:PIPE EXTRUSIONSUI.. |
|||
Tensile Strength, Yield | 23.0 MPa | 3340 psi | ISO R527 |
LyondellBasell Astryn EPKC10ZC Polypropylene Copolymer, Mineral Filled Key Features: medium high melt flow, very high modulus, UV-stabilized, mineral-filled polypropylene copolymer, very high rigidity, good impact resistance, good weatherability, good processabilityApp.. |
|||
Tensile Strength, Yield | 23.0 MPa | 3340 psi | Type I, 5 mm/min; ASTM D638 |
SABIC Innovative Plastics LNP STAT-KON CD0001 PS LNP* STAT-KON* CD000I is a compound based on Polystyrene resin containing Carbon Powder. Added features of this material include: Electrically Conductive, High Impact. |
|||
Tensile Strength, Yield | 23.0 MPa | 3340 psi | 50 mm/min; ISO 527 |
SABIC Innovative Plastics LNP THERMOCOMP C1000XXP PS (Europe-Africa-Middle East) LNP* THERMOCOMP* C1000XXP is a compound based on Polystyrene resin. Added features include: High Impact. |
|||
Tensile Strength, Yield | 23.0 MPa | 3340 psi | 50 mm/min; ISO 527-1/-2 |
Styrolution Polystyrol 485 I GR 2 PS Description: Polystyrol 485 I GR2 is a high-impact grade of polystyrene for extruded sheets with a matt surface.Applications: Sheet, semi finished goods, fat resistant food packaging.Information pro.. |
|||
Tensile Strength, Yield | 23.0 MPa | 3340 psi | ISO 527 |
Styrolution PS 456EB HIPS Styrolution PS 456EB is a high flow, high impact polystyrene with a good heat resistance and a high stiffness, developed for injection blow molding applications, especially for bottle of yot.High fl.. |
|||
Tensile Strength, Yield | 23.0 MPa @Temperature 23.0 °C |
3340 psi @Temperature 73.4 °F |
50mm/min; ISO 527-2/1A/50 |
SYNTHOS Krasten® 662E High Impact Polystyrene High impact grade with properties suitable for thermoforming. Processed mainly by extrusion and thermoforming. Production of demanding visual appearance plates, technical parts, sheets and molded pa.. |
|||
Tensile Strength, Yield | 23.0 MPa | 3340 psi | ASTM D638 |
A. Schulman POLYFORT™ PP 1930UX Extra High Flow, UV Stabilized Copolymer Polypropylene DescriptionPolyfort® PP 1930UX is an extra high flow, heat resistant, UV stabilized copolymer polypropylene.Information provided by A. Schulman. |
|||
Tensile Strength, Yield | 23.0 MPa | 3340 psi | ISO 527-2 |
Borealis Borpact™ SG910MO Polypropylene for Injection Molding Borpact™ SG910MO is a high impact and transparent polypropylene. This grade provides high gloss, high transparency and excellent impact properties. Applications: containers and products with medium.. |
|||
Tensile Strength, Yield | 23.0 MPa | 3340 psi | ASTM D638 |
A. Schulman POLYFORT™ PP 1930UX Extra High Flow, UV Stabilized Copolymer Polypropylene DescriptionPolyfort® PP 1930UX is an extra high flow, heat resistant, UV stabilized copolymer polypropylene.Information provided by A. Schulman. |
|||
Tensile Strength, Yield | 23.0 MPa | 3340 psi | ASTM D638 |
Total PPC 5571 Polypropylene, Impact Copolymer Injection Molding TOTAL Petrochemicals Polypropylene 5571 is a high impact copolymer with a Melt Flow index of 7 g/10 min.TOTAL Polypropylene 5571 is characterized by significantly improved impact resistance, while m.. |
|||
Tensile Strength, Yield | 23.0 MPa | 3340 psi | 50mm/min; ISO 527-2 |
Borealis BorPURE™ MB6561 High Density Polyethylene for Injection Molding BorPure™ MB6561 is a bimodal, high-density polyethylene intended for injection and compression molding. This grade combines excellent organoleptic properties, environmental stress crack resistance .. |
|||
Tensile Strength, Yield | 23.0 MPa @Strain 300 % |
3340 psi @Strain 300 % |
ISO 527-1/-2 |
Covestro Desmopan® W DP 89051D Polyurethane PreprocessingMax. Water content |
|||
Tensile Strength, Yield | 23.0 MPa | 3340 psi | ISO 527-2/50 |
ExxonMobil PP7054L1 Polypropylene Impact Copolymer Product Description: A nucleated impact copolymer resin with medium flow. It is suitable for molding applications like consumer products, closures, containers, toys and rigid packaging applications.. |
|||
Tensile Strength, Yield | 23.0 MPa | 3340 psi | |
Dow DOWLEX™ IP-41 High Density Polyethylene DOWLEX® IP-41 resin is an improved processing high density polyethylene resin designed to offer excellent processability and rigidity required for food containers, overcaps, and other general purpo.. |
|||
Tensile Strength, Yield | 23.0 MPa | 3340 psi | ASTM D638 |
Aclo Accucomp Polypropylene CPO406L Copolymer |
|||
Tensile Strength, Yield | 23.0 MPa | 3340 psi | ASTM-D638 |
Braskem GD5150K HDPE High Density Extrusion Polyethylene GD5150K is a high-density polyethylene specially developed for the manufacturing of insulation for wires and cables demanding high extrusion velocity. It has medium molar mass, shows good dielectric.. |
|||
Tensile Strength, Yield | 23.0 MPa | 3340 psi | ASTM-D638 |
Braskem GM7746CA HDPE Blow Molding Polyethylene GM7746CA is a high-density polyethylene specially developed for the manufacturing of blow molding fuel tanks. It has high molar mass and excellent mechanical properties. It also shows excellent tena.. |
|||
Tensile Strength, Yield | 23.0 MPa | 3340 psi | Typical; ISO 527-1/2 |
Axion Polymers Axpoly® PS02 1000 General Purpose Polystyrene PS02 Series polystyrenes offer the designer and processor a high performance polymer with well-defined properties in a range of options to suit many applications.The Axpoly® PS02 range of resin com.. |
|||
Tensile Strength, Yield | 23.0 MPa | 3340 psi | Typical; ISO 527-1/2 |
Axion Polymers Axpoly® PS02 Impact Modified Polystyrene 100% post-consumer recycled polymer (recovered from television casings)93% less CO2 impact compared with virgin*Successfully replaces virgin grade resinISO9000 quality certifiedAvailable in black/gr.. |
|||
Tensile Strength, Yield | 23.0 MPa | 3340 psi | ASTM D638 |
Aclo Accutech Polypropylene Copolymer CP0436T40L1 Talc Reinforced |
|||
Tensile Strength, Yield | 23.0 MPa | 3340 psi | |
BASF Novolen® 2500 H Polypropylene Injection molded parts, blow moldings and thermoformed parts.Data was collected by ISO methods and provided by BASF. |
|||
Tensile Strength, Yield | 23.0 MPa | 3340 psi | ISO 527 |
A.D. Compound Adene NCJA Homopolymer 30% CaCO3 Filled Polypropylene Information provided by A.D. Compound |
|||
Tensile Strength, Yield | 23.0 MPa | 3340 psi | 5mm/min; ASTM D638 |
Mitsui TPX® RT18 XB Methylpentene Copolymer TPX® is a 4-methylpentene-1 based polyolefin with a unique combination of transparency, heat and chemical resistant qualities. TPX is used in a wide variety of applications, including: medical equi.. |