Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Tensile Strength, Yield | >= 17.2 MPa | >= 2500 psi | ASTM D638 |
S&E Specialty Polymers GPP6025 PP Application: Specially engineered, low bloom, low specific gravity, flame retardant polypropylene compound designed with halogen based technology. Exhibits a unique balance of high flexural modulus .. |
|||
Tensile Strength, Yield | 17.2 MPa | 2500 psi | TM R050-36 |
Resinlab® EP950G Gray Aluminum Filled Rubber Modified Epoxy EP950G Gray is an aluminum filled one part rubber modified epoxy designed for bonding metal and other structural material subject to stress at elevated temperature. It is a medium paste-like viscosi.. |
|||
Tensile Strength, Yield | 17.2 MPa | 2500 psi | TM R050-36 |
Resinlab® EP950NMF Gray Non-Metallic Filled Rubber Modified Epoxy Resinlab™ EP950NMF Gray is a non-metallic filled version of EP950G. It is a one-part rubber modified epoxy designed for bonding metal and other structural material subject to stress at elevated tem.. |
|||
Tensile Strength, Yield | 17.2 MPa | 2500 psi | ASTM D638 |
Global TPO-28T Talc Filled TPO Grade Data provided by Global Polymers Corporation. |
|||
Tensile Strength, Yield | 17.2 MPa | 2500 psi | ASTM D412 |
Teknor Apex Flexalloy® 9100-75 Polyvinyl Chloride Elastomer Material Status-Commercial: ActiveAvailability-North AmericaTest Standards Available-ASTM Features: Good Flexibility, General Purpose, Ultra High MW, Recyclable, Good Thermal Stability, Good Weather.. |
|||
Tensile Strength, Yield | 17.2 MPa | 2500 psi | ASTM D638 |
Techmer ES HiFill FR® PP CO FR-N Availability: North AmericaForms: PelletsFeatures: Flame Retardant, High Impact Resistance and CopolymerInformation provided by TP Composites, Inc. |
|||
Tensile Strength, Yield | 17.2 MPa | 2500 psi | ASTM D638 |
A. Schulman POLYTROPE™ TPP 1008-01 Injection Molding Reactor Grade Olefinic Thermoplastic Elastomer DescriptionPolytrope TPP 1008-01 is an injection molding reactor grade olefinic thermoplastic elastomer (TPO). This product has excellent low temperature impact properties and flow characteristics .. |
|||
Tensile Strength, Yield | 17.2 MPa | 2500 psi | ASTM D638 |
A. Schulman POLYTROPE™ TPP 620 Olefinic Elastomer DescriptionPolytrope TPP 620is an olefinic elastomer developed to exhibit very low thermal expansion, high DOI on painted parts with good low temperature impact properties. ApplicationTPP 620 is des.. |
|||
Tensile Strength, Yield | 17.2 MPa | 2500 psi | ASTM D412 |
Teknor Apex UNIPRENE® 7010-50D Thermoplastic Elastomer Information provided by Teknor Apex Company |
|||
Tensile Strength, Yield | 17.2 MPa | 2500 psi | ASTM D638 |
A. Schulman POLYTROPE™ TPP 620 Olefinic Elastomer DescriptionPolytrope TPP 620is an olefinic elastomer developed to exhibit very low thermal expansion, high DOI on painted parts with good low temperature impact properties. ApplicationTPP 620 is des.. |
|||
Tensile Strength, Yield | 17.2 MPa | 2500 psi | ASTM D638 |
A. Schulman POLYTROPE™ TPP 503 Injection Molding Grade Olefinic Thermoplastic Elastomer DescriptionPolytrope TPP 503 is an injection molding grade olefinic thermoplastic elastomer. This product is recommended for parts requiring flexibility and high impact strength at sub-ambient temp.. |
|||
Tensile Strength, Yield | 17.2 MPa | 2500 psi | ASTM D638 |
A. Schulman POLYTROPE™ TPP 503 Injection Molding Grade Olefinic Thermoplastic Elastomer DescriptionPolytrope TPP 503 is an injection molding grade olefinic thermoplastic elastomer. This product is recommended for parts requiring flexibility and high impact strength at sub-ambient temp.. |
|||
Tensile Strength, Yield | 17.2 MPa | 2500 psi | ASTM D638 |
A. Schulman POLYTROPE™ TPP 503 Injection Molding Grade Olefinic Thermoplastic Elastomer DescriptionPolytrope TPP 503 is an injection molding grade olefinic thermoplastic elastomer. This product is recommended for parts requiring flexibility and high impact strength at sub-ambient temp.. |
|||
Tensile Strength, Yield | 17.2 MPa | 2500 psi | ASTM D638 |
A. Schulman POLYTROPE™ TPP 620 Olefinic Elastomer DescriptionPolytrope TPP 620is an olefinic elastomer developed to exhibit very low thermal expansion, high DOI on painted parts with good low temperature impact properties. ApplicationTPP 620 is des.. |
|||
Tensile Strength, Yield | 17.2 MPa | 2500 psi | ASTM D638 |
A. Schulman POLYTROPE™ TPP 503 Injection Molding Grade Olefinic Thermoplastic Elastomer DescriptionPolytrope TPP 503 is an injection molding grade olefinic thermoplastic elastomer. This product is recommended for parts requiring flexibility and high impact strength at sub-ambient temp.. |
|||
Tensile Strength, Yield | 17.2 MPa | 2500 psi | ASTM D638 |
ExxonMobil LLDPE LL 8446.21 Linear Low Density Polyethylene Resin (European Grade) Product Description: LL 8446 is a linear low density butane copolymer designed to offer excellent processability, whiteness, and fast grinding rate. This UV stabilized resin is ideally suited for ap.. |
|||
Tensile Strength, Yield | 17.2 MPa | 2500 psi | ASTM D-638 |
Axiall 02540 Plenum Flexible PVC Non-lead stabilized Category 3 plenum jacket.Information provided by Georgia GulfGeorgia Gulf became Axiall Corporation in 2013. |
|||
Tensile Strength, Yield | 17.2 MPa | 2500 psi | ASTM D-638 |
Axiall 11850 Wire & Cable Flexible PVC General purpose fungus and microbe resistant clear PVC compound. Also formulated for good UV resistance.Information provided by Georgia GulfGeorgia Gulf became Axiall Corporation in 2013. |
|||
Tensile Strength, Yield | 17.2 MPa | 2500 psi | ASTM D-638 |
Axiall 12880 Wire & Cable Flexible PVC 75C general purpose. 720 hour sunlight resistant.Information provided by Georgia GulfGeorgia Gulf became Axiall Corporation in 2013. |
|||
Tensile Strength, Yield | 17.2 MPa | 2500 psi | ASTM D-638 |
Axiall 14820 Wire & Cable Flexible PVC Non-lead stabilized drop cable jacketing. Also suitable for 80C rated general purpose jacket applications.Information provided by Georgia GulfGeorgia Gulf became Axiall Corporation in 2013. |
|||
Tensile Strength, Yield | 17.2 MPa | 2500 psi | ASTM D-638 |
Axiall 15880-02 Wire & Cable Flexible PVC TW, 60C oil. 80C Class 43 insulation. Oil resistant I. 300 hour sunlight resistant.Information provided by Georgia GulfGeorgia Gulf became Axiall Corporation in 2013. |
|||
Tensile Strength, Yield | 17.2 MPa | 2500 psi | ASTM D-638 |
Axiall 17881 Wire & Cable Flexible PVC THW insulation compound. UL recognized component for TW, THW insulation.Information provided by Georgia GulfGeorgia Gulf became Axiall Corporation in 2013. |
|||
Tensile Strength, Yield | 17.2 MPa | 2500 psi | ASTM D-638 |
Axiall 17883 Wire & Cable Flexible PVC UV resistant, 90C insulation compound with good low temperature properties.Information provided by Georgia GulfGeorgia Gulf became Axiall Corporation in 2013. |
|||
Tensile Strength, Yield | 17.2 MPa | 2500 psi | ASTM D-638 |
Axiall 17940 Wire & Cable Flexible PVC THW insulation compound. Also suitable for 105C applications in 3/64 and larger sizes. UL recognized component for THW. Oil resistant I, VW-1 rated.Information provided by Georgia GulfGeorgia Gul.. |
|||
Tensile Strength, Yield | 17.2 MPa | 2500 psi | ASTM D-638 |
Axiall 19911 Wire & Cable Flexible PVC Non-lead stabilized, 105°C rated insulation compound recommended for AWM applications.Information provided by Georgia GulfGeorgia Gulf became Axiall Corporation in 2013. |
|||
Tensile Strength, Yield | 17.2 MPa | 2500 psi | ASTM D-638 |
Axiall 69148 Wire & Cable Flexible PVC Non-lead stabilized tray cable jacket. UL recognized for 720 hour sunlight resistance in all colors.Information provided by Georgia GulfGeorgia Gulf became Axiall Corporation in 2013. |
|||
Tensile Strength, Yield | 17.2 MPa | 2500 psi | ASTM D-638 |
Axiall 8872 Moldings & Extrusions Flexible PVC A clear extrusion and molding grade compound.Information provided by Georgia GulfGeorgia Gulf became Axiall Corporation in 2013. |
|||
Tensile Strength, Yield | 17.2 MPa | 2500 psi | ASTM D-638 |
Axiall 18860 Wire & Cable Flexible PVC Flame retardant jacketing compound recommended for a maximum service temperature rating of 105°C.Information provided by Georgia GulfGeorgia Gulf became Axiall Corporation in 2013. |
|||
Tensile Strength, Yield | 17.2 MPa | 2500 psi | ASTM D-638 |
Axiall 19802 Wire & Cable Flexible PVC Clear, 105°C rated extrusion compound recommended for 1/32" wall jacketing. Also well suited for injection molding applications.Information provided by Georgia GulfGeorgia Gulf became Axiall Corpo.. |
|||
Tensile Strength, Yield | 17.2 MPa | 2500 psi | ASTM D-638 |
Axiall 01561 Plenum Flexible PVC Non-lead stabilized CAT 5 plenum jacket.Information provided by Georgia GulfGeorgia Gulf became Axiall Corporation in 2013. |