Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Tensile Strength, Yield | 22.0 MPa | 3190 psi | ISO 527 |
Premix Thermoplastics PRE-ELEC® PE 1294 PRE-ELEC PE 1294 is a conductive thermoplastic compound based on PE-HD. Conductivity is achieved by using special conductive carbon black. In addition to a low electrical resistivity PRE-ELEC PE 129.. |
|||
Tensile Strength, Yield | 22.0 MPa | 3190 psi | ASTM D638 |
RedEye On Demand ABS for Rapid Prototyping ABS or Acrylonitrile butadiene styrene is a true industrial thermoplastic that is impact-resistant and structurally strong. ABS parts are built with a layered manufacturing process utilizing Fused D.. |
|||
Tensile Strength, Yield | 22.0 MPa | 3190 psi | ASTM D638 |
Petromont DGDP-2485 High Density Polyethylene Resin Pétromont® DGDP-2485 Natural is a high density polyethylene copolymer produced using the UNIPOL® process technology. DGDP-2485 is a high performance resin with very high melt strength, excellent .. |
|||
Tensile Strength, Yield | 22.0 - 105 MPa @Temperature -40.0 - 100 °C |
3190 - 15200 psi @Temperature -40.0 - 212 °F |
Average value: 63.5 MPa Grade Count:1 |
Overview of materials for Polybutylene Terephthalate (PBT), Unreinforced, Molded This property data is a summary of similar materials in the MatWeb database for the category "Polybutylene Terephthalate (PBT), Unreinforced, Molded". Each property range of values reported is minim.. |
|||
Tensile Strength, Yield | 22.0 MPa | 3190 psi | ASTM D638 |
Chevron Phillips HiD® 9396T HDPE Natural Pipe Resin
(discontinued **) Resin Type: Linear Copolymer; ASTM D 3350 Classification: 345420A; ASTM D 4976 Classification: PE 235, A 56601Applications:Base Resin for use in Utility and Conduit Pipe ApplicationsData provided by.. |
|||
Tensile Strength, Yield | 22.0 MPa | 3190 psi | 50 mm/min; ISO 527-1,-2 |
Inno-Comp INNOPOL® CS 2-3302 Elastomer Modified Polypropylene Block-Copolymer INNOPOL® CS 2-3302 is an elastomer modified compound based on polypropylene block-copolymer. This grade is available in nature and custom colored form.INNOPOL® CS 2-3302 is developed for produ.. |
|||
Tensile Strength, Yield | 22.0 MPa | 3190 psi | 50mm/min; ASTM D638-64T |
Micropol Microlin ML27 Linear Polyethylene Rotational Molding Powder Information provided by Micropol Limited |
|||
Tensile Strength, Yield | 22.0 MPa | 3190 psi | ASTM D638 |
Lucent Polymers TPO-30T Thermoplastic Polyolefin, 30% Mineral Filled Melt Flow Adjustable for ApplicationAdd "U" for UV StabilizedAdd "H" for Heat StabilizedInformation provided by Lucent Polymers, Inc. |
|||
Tensile Strength, Yield | 22.0 MPa | 3190 psi | ASTM D 638 |
LyondellBasell Hostacomâ„¢ BG722AC Polypropylene Copolymer Description: Hostacomâ„¢ BG722AC medium high melt flow, 1,700 MPa flexural modulus, precolored, mineral-filled polypropylene copolymer is designed with an excellent balance of stiffness, impact r.. |
|||
Tensile Strength, Yield | 22.0 - 28.0 MPa | 3190 - 4060 psi | ASTM D638 |
Solvay Specialty Polymers solvene® 250 EAP Electroactive Polymer (EAP) Annealing Temperature - < 135 °C; Breakdown Voltage - 250 kV/mm; Coercive Field - 50 kV/mm; Crystallization Point - ASTM D3418 123 °C; Curie Temperature - ASTM D3418 110 °C; d33 - -38.0 pC/.. |
|||
Tensile Strength, Yield | >= 22.0 MPa | >= 3190 psi | |
Sibur 23007-30T 1st Grade Polypropylene Copolymer For production of pipes for hot and cold water supply, sewerage, containers for shampoo, oil, milk, and packing products of low muddiness. |
|||
Tensile Strength, Yield | 22.0 MPa @Temperature 23.0 °C |
3190 psi @Temperature 73.4 °F |
50mm/min; ISO 527-2/1A/50 |
SYNTHOS Krasten® FB28 High Impact Polystyrene And Polyethylene Blend Polymer blend HIPS/PE. High toughness, very good tensile properties and environmental stress cracking resistance. Processed mainly by extrusion and thermoforming. Production of sheets and films, tec.. |
|||
Tensile Strength, Yield | 22.0 MPa | 3190 psi | Crosshead speed 100 mm/min; ISO 527 |
SCG Chemicals EL-Leneâ„¢ H5211PC High Density Polyethylene Pipe Resin Key Characteristics: Good processing, high thermal stability, good balance of MRS, SCG, and RCPRecommended Applications: Water pressure and gas pipesCertification: Certified by EXOVA, LNE, AENOR,.. |
|||
Tensile Strength, Yield | 22.0 MPa | 3190 psi | At 50 mm/min; ISO 527-2 |
Borealis Borstar® MB7541 High Density Polyethylene for Injection Molding Borstar MB7541 is a bimodal, natural, high density polyethylene produced by the Borstar PE technology. Borstar MB7541 combines excellent organoleptic properties, Environmental Stress Crack Resistan.. |
|||
Tensile Strength, Yield | 22.0 MPa | 3190 psi | 50mm/min; ISO 527-2 |
Borealis Daplen™ EE188HP Polypropylene TPO Compound Daplen™ EE188HP is a 15% mineral filled elastomer modified polypropylene compound intended for injection molding. This material has an excellent balance between impact strength and stiffness and g.. |
|||
Tensile Strength, Yield | 22.0 MPa | 3190 psi | ASTM D638 |
A. Schulman POLYFLAM™ RPP 1174 Talc Filled, Homopolymer Polypropylene DescriptionPolyflam® RPP 1174 is a high performance talc filled homopolymer polypropylene product with UL V0 flammability and 105°C temperature index at 0.81 mm. RPP 1174 is non-dripping and has .. |
|||
Tensile Strength, Yield | 22.0 MPa | 3190 psi | 50mm/min; ISO 527-2 |
Borealis Daplen™ EE189AI Polypropylene TPO Compound Daplen™ EE189AI is a 15% mineral filled polypropylene compound intended for injection molding. This material has an excellent balance between impact strength and stiffness and is easy to process. .. |
|||
Tensile Strength, Yield | 22.0 MPa | 3190 psi | 2.0 in/min; 0.050" thickness; ASTM D-638 |
Chevron Phillips EC6600 HIPS - High Impact Polystyrene Rubber modified high impact polystyrene.Applications:Lithographic sheetPrinted toys and gamesPoint of purchase displaysSilk screen printingFeatures:Excellent printabilityMatte surface finishHigh hea.. |
|||
Tensile Strength, Yield | 22.0 MPa | 3190 psi | 50 mm/min; ISO 527 |
Eurostar Starpylen MX05039 PP, Mineral Filled, Injection Molding Starpylen MX05039 is a Mineral Filled Polypropylene Injection Molding ResinInformation provided by Eurostar. |
|||
Tensile Strength, Yield | 22.0 MPa | 3190 psi | ASTM D638 |
Aclo Accutech Polypropylene Copolymer CP0436W10L1 Wollastonite Reinforced |
|||
Tensile Strength, Yield | 22.0 MPa | 3190 psi | |
BASF Procom® C40H 455 Polypropylene Data was collected by ISO methods and provided by BASF. |
|||
Tensile Strength, Yield | 22.0 MPa | 3190 psi | ISO 527 |
A.D. Compound Adene NTFAG Copolymer 20% Talc Filled Polypropylene Information provided by A.D. Compound |
|||
Tensile Strength, Yield | 22.0 MPa | 3190 psi | Typical; ISO 527-1/2 |
Axion Polymers Axpoly® PS01 3000 General Purpose Polystyrene PS01 Series polystyrenes offer the designer and processor a high performance polymer with well-defined properties in a range of options to suit many applications.The Axpoly® PS01 range of custom co.. |
|||
Tensile Strength, Yield | 22.0 MPa | 3190 psi | |
Addcomp PRIEX® 25095 Maleic Anhydride Grafted PP random copolymer Uses: Enhance sealability in bi-oriented polypropylene film packagingIncrease adhesion between metallic or textile wire and polymer coatingAchieve high compatibility between glass or other natural f.. |
|||
Tensile Strength, Yield | 22.0 MPa | 3190 psi | ASTM D638 |
ExxonMobil Escorene® HD-8760 HDPE, Rotational Molding Pellets
(discontinued **) Data Provided by Exxon Chemical Canada.Characteristics: Fully formulated UV-8 type protection, Higher stiffness, Good flowUses: Recreational products, Industrial components, RV tanks |
|||
Tensile Strength, Yield | 22.0 MPa | 3190 psi | ASTM D638 |
ExxonMobil Escorene® HD-8761 LHDPE Rotational Molding Grade
(discontinued **) Data provided by the manufacturer, Exxon Chemical.HD-8700 series are linear high density polyethylene resins that provide outstanding environmental stress crack resistance. HD-8761 is fully formula.. |
|||
Tensile Strength, Yield | 22.0 MPa | 3190 psi | ASTM D638 |
A. Schulman POLYFLAM™ RPP 1221 Low-Blooming, General Purpose Copolymer Polypropylene DescriptionPolyflam® RPP 1221 is a low-blooming general purpose copolymer polypropylene flame retardant material with a UL-V2 flammability rating and 115°C temperature index at 0.030 in. Informati.. |
|||
Tensile Strength, Yield | 22.0 MPa @Temperature 100 °C |
3190 psi @Temperature 212 °F |
ISO 527 |
BASF Ultradur B 4520 PBT Ultradur B4520 is a medium viscosity, rapidly freezing injection molding grade. |
|||
Tensile Strength, Yield | 22.0 MPa | 3190 psi | ASTM D638 |
BP Amoco Acctuf® 3541 Impact Copolymer Polypropylene
(discontinued **) Suggested fabrication methods: Injection moldingFeatures: General purpose, High melt flowComplies with FDA specification, Title 21, CFR 177.1520.Typical property data below from injection molded sam.. |
|||
Tensile Strength, Yield | 22.0 - 80.0 MPa @Temperature -40.0 - 80.0 °C |
3190 - 11600 psi @Temperature -40.0 - 176 °F |
Average value: 51.0 MPa Grade Count:2 |
Overview of materials for Acetal Copolymer, Impact Modified This property data is a summary of similar materials in the MatWeb database for the category "Acetal Copolymer, Impact Modified". Each property range of values reported is minimum and maximum values.. |