Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Tensile Strength, Yield | 33.8 MPa | 4900 psi | Type I, 51 mm/min; ASTM D638 |
PolyOne Maxxam™ PD 2201 Polypropylene, Unspecified (PP, Unspecified) PolyOne's Maxxam™ family of polypropylene- and polyethylene-based products covers a wide range of applications, markets and performance requirements. Standard grades are compounded with calcium car.. |
|||
Tensile Strength, Yield | 33.8 MPa | 4900 psi | Type I, 51 mm/min; ASTM D638 |
PolyOne Trilliant™ HC X HC5200-0026 RS Natural Polypropylene, Unspecified (PP, Unspecified) Information provided by PolyOne |
|||
Tensile Strength, Yield | 33.8 MPa | 4900 psi | 2 in per min, tangent; ASTM D638 |
Network Polymers NPP 30-2000 TF40 Description: 40% Talc Filled Homopolymer PolypropyleneInformation provided by Network Polymers Inc. |
|||
Tensile Strength, Yield | 33.8 MPa | 4900 psi | |
TSE Industries Millathane® CM Millable Polyether Urethane Rubber with 20 PHR N650 Filler MILLATHANE CM is a sulfur and peroxide curable polyether urethane rubber. Its outstanding property is its great resistance to abrasion, which makes it of special interest for articles that are subje.. |
|||
Tensile Strength, Yield | 33.8 MPa | 4900 psi | |
TSE Industries Millathane® CM Millable Polyether Urethane Rubber with 30 PHR N990 Filler MILLATHANE CM is a sulfur and peroxide curable polyether urethane rubber. Its outstanding property is its great resistance to abrasion, which makes it of special interest for articles that are subje.. |
|||
Tensile Strength, Yield | 33.8 MPa | 4900 psi | 2 in/min; ASTM D638 |
Phillips 66 COPYLENE® CH050 Polypropylene, Homopolymer, Cast Film BOPP COPYLENE™ CH050 is a polypropylene controlled rheology homopolymer resin designed for Cast Film BOPP (biaxially oriented polypropylene) film extrusion applications. Applications: Bags & Pouches, Pe.. |
|||
Tensile Strength, Yield | 33.8 MPa | 4900 psi | ASTM D638 |
Albis Plastics Cellulose Acetate Propionate CP800 (Base Grade), 8% Plasticizer
(discontinued **) Amorphous Cellulose Acetate Propionate (CAP)Characteristics: Strength, Hardness, Stiffness, Weatherability and Dimensional StabilityApplications: Brush Handles, Safety Glasses, Optical Products and .. |
|||
Tensile Strength, Yield | 33.8 MPa | 4900 psi | ASTM D638 |
Albis Plastics Cellulose Acetate Propionate CP801 (UV Inhibitor Added), 8% Plasticizer
(discontinued **) Amorphous Cellulose Acetate Propionate (CAP)Characteristics: Strength, Hardness, Stiffness, Weatherability and Dimensional StabilityApplications: Brush Handles, Safety Glasses, Optical Products and .. |
|||
Tensile Strength, Yield | 33.8 MPa | 4900 psi | ASTM D638 |
Albis Plastics Cellulose Acetate Propionate CP808 (FDA), 8% Plasticizer
(discontinued **) Amorphous Cellulose Acetate Propionate (CAP)Characteristics: Strength, Hardness, Stiffness, Weatherability and Dimensional StabilityApplications: Brush Handles, Safety Glasses, Optical Products and .. |
|||
Tensile Strength, Yield | 33.8 MPa | 4900 psi | ASTM D638 |
Fiberfil® PP-60/TC/13 BL8860 Polypropylene Homopolymer, 13% Talc Filled Information provided by FIBERFIL Engineered Plastics |
|||
Tensile Strength, Yield | 33.8 MPa | 4900 psi | ASTM D638 |
Techmer ES Plastiblend® ABS 8004 UV Availability: North AmericaForms: PelletsAdditive: UV StabilizerFeatures: Good UV Resistance and High Heat ResistanceInformation provided by TP Composites, Inc. |
|||
Tensile Strength, Yield | 33.8 MPa | 4900 psi | ASTM D638 |
Techmer ES Plastiblend® ABS 8012 Availability: North AmericaForms: PelletsProcessing Method: ExtrusionInformation provided by TP Composites, Inc. |
|||
Tensile Strength, Yield | 33.8 MPa | 4900 psi | ASTM D638 |
Techmer ES Plastiblend® ABS 8004 Availability: North AmericaForms: PelletsFeatures: General Purpose and High Impact ResistanceInformation provided by TP Composites, Inc. |
|||
Tensile Strength, Yield | 33.8 MPa | 4900 psi | ASTM D638 |
A. Schulman PP 3487-01 Polypropylene Homopolymer Polypropylene DescriptionPolypropylene PP 3487-01 is a special homopolymer polypropylene formulated with a long term heat aging resistance. This material has excellent resistance to chemicals and solvents. High.. |
|||
Tensile Strength, Yield | 33.8 MPa | 4900 psi | 2" (50mm) per min.; ASTM D638 |
Formosa Plastics Formolene® 4100P Injection Molding Polypropylene Homopolymer with ESCR AdditivesApplications: Closures, small appliances, housewares and toys.Formolene 4100P is a low viscosity, highly isotactic polypropylene homopolymer designed for various injec.. |
|||
Tensile Strength, Yield | 33.8 MPa | 4900 psi | |
TSE Industries Millathane® CM Millable Polyether Urethane Rubber, 310ºF Cure Temperature MILLATHANE CM is a sulfur and peroxide curable polyether urethane rubber. Its outstanding property is its great resistance to abrasion, which makes it of special interest for articles that are subje.. |
|||
Tensile Strength, Yield | 33.8 MPa | 4900 psi | |
TSE Industries Millathane® CM Millable Polyether Urethane Rubber, No Milling Time MILLATHANE CM is a sulfur and peroxide curable polyether urethane rubber. Its outstanding property is its great resistance to abrasion, which makes it of special interest for articles that are subje.. |
|||
Tensile Strength, Yield | 33.8 MPa | 4900 psi | 81% Ret. |
UBE UBESTA® 3030U Nylon 12 (After Fuel C/E10 for 500 hours) Description: UBESTA has a strong resistance to chemicals. Under normal conditions, it is not significantly affected by alkalis, alcohols, ethers, ketones, hydrocarbons, lubricating oils, gasoline, c.. |
|||
Tensile Strength, Yield | 33.8 MPa | 4900 psi | |
TSE Industries Millathane® CM Millable Polyether Urethane Rubber with 30 PHR N990 Filler MILLATHANE CM is a sulfur and peroxide curable polyether urethane rubber. Its outstanding property is its great resistance to abrasion, which makes it of special interest for articles that are subje.. |
|||
Tensile Strength, Yield | 33.8 MPa | 4900 psi | ASTM D638 |
Dow H7012-35RN Polypropylene Homopolymer Resin OverviewGood processabilityGood mold fillingFaster cycle timesContains nucleating additiveComplies with U.S. FDA 21 CFR 177.1520 (c)1.1aDOW H7012-35RN Polypropylene Resin is intended for use in inje.. |
|||
Tensile Strength, Yield | 33.8 MPa | 4900 psi | 2 in/min (50 mm/min); ASTM D638 |
Bapolene® 4022 Polypropylene, Biaxially Oriented Film Grade Bapolene PP4022 is a PP homopolymer designed for oriented film applications. It offers good clarity and optical properties. This resin meets FDA standards for food contact applications.Application.. |
|||
Tensile Strength, Yield | 33.8 MPa | 4900 psi | ASTM D-638 |
Bapolene® 4062 Polypropylene, Injection Grade Bapolene PP4062 is a high flow general purpose injection molding resin. This product meets FDA standards for food contact applications.Applications: Housewares, closures, spray caps, food containers.. |
|||
Tensile Strength, Yield | 33.8 MPa | 4900 psi | ASTM D638 |
Asahi Kasei Thermofil P-20TC-1161 20% Talc Filled, Heat Stabilized Information provided by Asahi Thermofil |
|||
Tensile Strength, Yield | 33.8 MPa | 4900 psi | ASTM D638 |
Asahi Kasei Thermofil P-20TC-Y118 20% Talc Reinforced, Heat Stabilized Information provided by Asahi Thermofil |
|||
Tensile Strength, Yield | 33.8 MPa | 4900 psi | ASTM D638 |
Techmer ES Statiblend® PP FR BK Availability: North AmericaForms: PelletsFeature: Flame Retardant, Homopolymer and Semi ConductiveUL File Number: E157318Information provided by TP Composites, Inc. |
|||
Tensile Strength, Yield | 33.8 MPa | 4900 psi | |
TSE Industries Millathane® CM Millable Polyether Urethane Rubber, No Milling Time MILLATHANE CM is a sulfur and peroxide curable polyether urethane rubber. Its outstanding property is its great resistance to abrasion, which makes it of special interest for articles that are subje.. |
|||
Tensile Strength, Yield | 33.8 MPa | 4900 psi | |
TSE Industries Millathane® CM Millable Polyether Urethane Rubber with 20 PHR N650 Filler MILLATHANE CM is a sulfur and peroxide curable polyether urethane rubber. Its outstanding property is its great resistance to abrasion, which makes it of special interest for articles that are subje.. |
|||
Tensile Strength, Yield | 33.8 MPa | 4900 psi | ASTM D638 |
Braskem INSPIRE™ 117 Performance Polypropylene Polymer D 117.00 Developmental Performance Polymer is a propylene-based resin intended for use in extrusion blow molding and thermoforming applications where stiffness, toughness, high temperature resistanc.. |
|||
Tensile Strength, Yield | 33.8 MPa | 4900 psi | ASTM D638 |
Spartech PP5340 Mica Reinforced Homopolymer Information provided by Spartech |