Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

Polymer Property : Tensile Strength, Yield = 58000 psi Product List

Mechanical Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.
Mechanical Properties Metric English Comments
Tensile Strength, Yield 400 MPa
58000 psi
Niagara LaSalle 1117 Cold Finished Steel Bar
This is a resulphurized steel with good machinability and surface finish, but not as good as the standard screw stocks. Its case hardening characteristics are superior and it develops an excellent c..
Tensile Strength, Yield 400 MPa

@Temperature 760 °C
58000 psi

@Temperature 1400 °F
Haynes Hastelloy® W alloy, gas metal arc welds, aged 1000 hours at 650°C (1200°F)
Solid solution-strengthened developed as a filler metal for welding of dissimilar alloys. Applications include excellent dissimilar welding characteristics in the gas turbine, aerospace, and chemica..
Tensile Strength, Yield 400 MPa

@Strain 0.200 %
58000 psi

@Strain 0.200 %
Haynes Multimet® alloy, 1.6 mm thick sheet, 1177°C heat treatment, rapid air cooled
Recommended for use in applications involving high stress at temperatures up to 816°C (1500°F), and moderate stresses up to 1093°C (2000°F). Excellent oxidation resistance, good ductilit..
Tensile Strength, Yield 400 MPa

@Strain 0.200 %,
Temperature 93.0 °C
58000 psi

@Strain 0.200 %,
Temperature 199 °F
Haynes Ultimet® alloy, 1.6 mm sheet
Co content as balance, excellent corrosion resistance, outstanding wear resistance, high tensile strength combined with excellent impact toughness and ductility. Ideal welding material with exceptio..
Tensile Strength, Yield >= 400 MPa
>= 58000 psi
Minimum Guaranteed
Industeel SOLEIL A2 13% Cr High Strength Martensitic Stainless Steel (QT550 Heat Treatment)
Description: Soleil A2 has combined Chromium (~13%) and Carbon ~0.10%) additions to provide an excellent combination of high mechanical properties and improved corrosion resistance properties. The g..
Tensile Strength, Yield 400 MPa

@Strain 0.200 %
58000 psi

@Strain 0.200 %
Haynes 625 alloy, 30% cold reduction, 1120°C anneal for 5 minutes
Cb and Ta content 3.7% combined. Excellent strength up to 816°C, good oxidation resistance and aqueous corrosion, excellent forming and welding characteristics. Applications include a variety of ..
Tensile Strength, Yield 400 MPa

@Strain 0.200 %
58000 psi

@Strain 0.200 %
Haynes Hastelloy® B-3® alloy, 6.3 mm plate
The attributes of Corrosion-Resistant HASTELLOY® alloys include high resistance to uniform attack, outstanding localized corrosion resistance, excellent stress corrosion cracking resistance, and ..
Tensile Strength, Yield >= 400 MPa
>= 58000 psi
After bake hardening
SSAB Tunnplat Docol® 500DP High-strength Steel
High-strength SteelComments: Docol DP - Cold Rolled Steel - dual-phase steel. Property values are for cold-rolled steel; thicknesses 0.5 - 1.6 mm. Iron content is approximate - exact composition is..
Tensile Strength, Yield 400 MPa
58000 psi
ThyssenKrupp TBL Structural Steel
This Material Specification applies to heavy plate with thicknesses up to 100 mm, made of the fine-grain structural steel TBL.Application: The steel may be used for welded constructions of different..
Tensile Strength, Yield 400 MPa
58000 psi
Goodfellow Aluminum-Copper/SiC Metal Matrix Composite
Information provided by Goodfellow.
Tensile Strength, Yield 400 MPa
58000 psi
Hexcel® HexPly® ES70 120°C Curing Epoxy Matrix, Hybrid carbon/Aramid fabric 245 g/m2
Information provided by HexCel
Tensile Strength, Yield 400 MPa

@Temperature 23.0 °C
58000 psi

@Temperature 73.4 °F
Hexcel® HexPly® F515 Epoxy Resin, 1581 Glass Fabric
Hexcel designation: 1581-38"-F515; Fiber 150-1/2Information provided by HexCel
Tensile Strength, Yield 400 MPa
58000 psi
Hexcel® HexPly® M34 75°C (167°F) Curing Epoxy Matrix, E-glass Balanced Fabric 600 g/m2
Information provided by HexCel
Tensile Strength, Yield 400 MPa
58000 psi
90º, RT, Dry; EN2561
Hexcel® HexPly® M42 180°C (350°F) Curing Epoxy Matrix, 52%/G1177 Glass/Carbon Fiber
Information provided by HexCel
Tensile Strength, Yield 400 - 483 MPa
58000 - 70000 psi
0.2% offset
Eagle Brass 19210 XP-10 Copper Iron, Extra Hard
19210 has higher strengths than most copper alloys but thanks to its composition and processing it retains formability and conductivity that other copper alloys lose. Typical uses include cooling f..
Tensile Strength, Yield 400 - 483 MPa
58000 - 70000 psi
0.2% offset
Eagle Brass 425 Tin Brass 2%, 3/4 Hard
Alloy C425 is a low zinc-containing alloy with good combination of tensile strength, electrical conductivity, formability and corrosion resistance. Applications include electrical springs, connector..
Tensile Strength, Yield >= 400 MPa

@Strain 0.200 %
>= 58000 psi

@Strain 0.200 %
CLAL-MSX ARCAP Anticorrosion AP1C H12 1/2 hard, Rolled Copper Alloy
Description: The AP1C grade (used in rods for parts that are to be deformed by torsion, bending, riveting, swaging... and for welding) and the AP1 grade (sheet, strip, wire, tubes) is machineable un..
Tensile Strength, Yield >= 400 MPa

@Strain 0.200 %
>= 58000 psi

@Strain 0.200 %
CLAL-MSX NICLAFOR® 1000 TD2 Quenched/Cold Rolled, Rolled Copper Alloy
Finished parts can be produced with: reduction in sections, high mechanical properties even at high temperature, high spring properties, high conductivity, good resistance to corrosion, low permeabi..
Tensile Strength, Yield >= 400 MPa

@Strain 0.200 %
>= 58000 psi

@Strain 0.200 %
CLAL-MSX NICLAL 3444 H14 4/4 Hard Copper Alloy, diameter > 8 Copper Alloy, Free Cutting Bronze
Main Characteristics: Excellent machineabilityHigh mechanical propertiesSelf lubricating alloyTypical Applications:Parts for connectorsFriction partsBearings-Pinions-Lock pinsInformation provided b..
Tensile Strength, Yield 400 MPa
58000 psi
Typical
Dura-Bar 80-55-06 Continuously Cast Ductile Iron Bar Stock ASTM A536
Continuously cast ductile iron bar stock is produced in a wide variety of sizes and shapes, including rounds, rectangles and special shape cross sections.It often is used as a direct replacement for..
Tensile Strength, Yield 400 - 555 MPa

@Strain 0.200 %
58000 - 80500 psi

@Strain 0.200 %
ALIMEX AMP 8000 Aluminum Plate
AMP 8000 offers higher strength levels, good machinability and dimensional stability. Its tensile strength is up to 40% higher than AlZn5.5MgCu (7075). Moulding, (Prototypes) injection moulds, Jig ..
Tensile Strength, Yield 400 - 485 MPa
58000 - 70300 psi
ArcelorMittal FB 540 Hot rolled ferrite-bainite steel
Description: This range of hot-rolled high strength steels has been developed to meet weight reduction requirements. It comprises four strength levels: FB 450, 540, 560 and 590. This family of steel..
Tensile Strength, Yield 400 MPa

@Strain 0.200 %
58000 psi

@Strain 0.200 %
Haynes Hastelloy® C-22® alloy, GTAW, as welded, unnotched
HASTELLOY® C-22® alloy is a nickel-chromium-molybdenum-tungsten alloy with excellent overall corrosion resistance compared to other Ni-Cr-Mo alloys, including HASTELLOY C-276 and C-4 alloys and al..
Tensile Strength, Yield 400 MPa

@Strain 0.200 %,
Temperature 200 °C
58000 psi

@Strain 0.200 %,
Temperature 392 °F
Special Metals UDIMET® alloy L-605 Co-Cr-W-Ni Alloy
UDIMET® alloy L-605 (UNS R30605) is a solid solution strengthened cobalt-chromium-tungsten-nickel alloy with excellent high-temperature strength and excellent oxidation resistance to 2000°F (1093°..
Copyright © lookpolymers.com All Rights Reserved