Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Tensile Strength, Yield | 70.0 MPa | 10200 psi | Type 1B, 50mm/min; ISO 527-1/2:1993 |
Nylacast POM C Acetal Copolymer The copolymer grade is the ideal combination of strength, stiffness and wears resistance. It absorbs very little moisture, is easily machinable and is genuinely porosity-free making it the preferred.. |
|||
Tensile Strength, Yield | 70.0 MPa | 10200 psi | 5 mm/min; ISO 527 |
SABIC Innovative Plastics Lexan® 500RS PC (Europe-Africa-Middle East) LEXAN 500RS is a medium viscosity, glass reinforced, flame retardant grade. |
|||
Tensile Strength, Yield | 70.0 MPa @Temperature 23.0 °C |
10200 psi @Temperature 73.4 °F |
ISO 527-2/50 |
PolyOne Bergamid™ A70 UF natur V0 Polyamide 66 (Nylon 66) PA66 unreinforced general-purpose injection molding gradeInformation provided by PolyOne |
|||
Tensile Strength, Yield | 70.0 MPa | 10200 psi | 50 mm/min; ISO 527 |
SABIC Innovative Plastics Lexan® XHT2146 PC Copolymer (Europe-Africa-Middle East) XHT2146 resin is a high flow, high heat polycarbonate copolymer with improved release performance compared to Lexan* XHT2141 resin. It is available in a range of opaque and limited transparent colo.. |
|||
Tensile Strength, Yield | 70.0 MPa | 10200 psi | 50 mm/min; ISO 527 |
SABIC Innovative Plastics Lexan® XHT3141 PC Copolymer (Asia Pacific) XHT3141 is a high flow, high heat polycarbonate copolymer. It is available in a range of opaque and limited transparent colors. |
|||
Tensile Strength, Yield | 70.0 MPa | 10200 psi | 50 mm/min; ISO 527 |
SABIC Innovative Plastics Lexan® XHT2146 PC Copolymer (Asia Pacific) XHT2146 resin is a high flow, high heat polycarbonate copolymer with improved release performance compared to Lexan* XHT2141 resin. It is available in a range of opaque and limited transparent colo.. |
|||
Tensile Strength, Yield | 70.0 - 184 MPa | 10200 - 26700 psi | Average value: 121 MPa Grade Count:13 |
Overview of materials for Nylon 66/6, 30% Glass Fiber Reinforced This property data is a summary of similar materials in the MatWeb database for the category "Nylon 66/6, 30% Glass Fiber Reinforced". Specific grades with glass content between 25% and 34% are incl.. |
|||
Tensile Strength, Yield | 70.0 MPa | 10200 psi | 5 [mm/min], Test Speed 50 [mm/min]; ISO 527-1/2 |
Akro-Plastic Akromid® S31 (3484) PA 6.10 Dry
(discontinued **) A characteristic property of AKROMID® S (PA 6.10) is that it has a renewable-resource content of up to 70 % and therefore fulfils the current definition of a bioplastic. The plant-based raw materia.. |
|||
Tensile Strength, Yield | 70.0 MPa | 10200 psi | 50 mm/min; ISO 527 |
SABIC Innovative Plastics NORYL V0150B PPE+HIPS (Asia Pacific) Noryl* V0150B is an unfilled, injection moldable modified polyphenylene ether resin.. Designed for high heat resistance and thin wall FR performance, this resin delivers a UL94 V0 rating at 1.5 mm a.. |
|||
Tensile Strength, Yield | 70.0 MPa | 10200 psi | 5 mm/min; ISO 527 |
SABIC Innovative Plastics LNP LUBRICOMP RP002 PA 66 (Europe-Africa-Middle East) LNP* LUBRICOMP* RP002 is a compound based on PA 66 resin containing PTFE, Silicone: Added features include; Internallly Lubricated. |
|||
Tensile Strength, Yield | 70.0 MPa | 10200 psi | SABIC - Japan Method |
SABIC Innovative Plastics NORYL INT1512 PPE+HIPS (Asia Pacific) PPE/HIPS GF filled for auto interior |
|||
Tensile Strength, Yield | 70.0 MPa | 10200 psi | Type I, 5 mm/min; ASTM D638 |
SABIC Innovative Plastics Valox® 4512 PBT+PC (Europe-Africa-Middle East) 10% GF FR PBT/PC Blend |
|||
Tensile Strength, Yield | 70.0 MPa | 10200 psi | ISO 527 |
Polyram PlusTek PA862 Nylon 6.6 for Injection Molding, High Impact Modified High impact modified Nylon 6.6 for injection molding applications.Information provided by Polyram. |
|||
Tensile Strength, Yield | >= 70.0 MPa | >= 10200 psi | ASTM-D638 |
Polyram PlusTek RB133 Nylon 6, General Purpose General purpose polyamide 6 for injection molding applicationsInformation provided by Polyram Ram On Ind. |
|||
Tensile Strength, Yield | >= 70.0 MPa | >= 10200 psi | ASTM-D638 |
Polyram PlusTek RB703 Nylon 6, UV Stabilized General purpose, UV stabilized polyamide 6 for injection molding applicationsInformation provided by Polyram Ram On Ind. |
|||
Tensile Strength, Yield | 70.0 MPa | 10200 psi | ISO 527 |
Polyram RamTal PMH2003 Polyacetal Homopolymer for Injection Molding General purpose polyacetal homopolymer for injection molding applications, MFI 3.Information provided by Polyram. |
|||
Tensile Strength, Yield | 70.0 MPa | 10200 psi | ASTM D638 |
A. Schulman POLYFORT™ FPP 1236 Glass Filled Chemically Coupled Homopolymer Polypropylene DescriptionPolyfort® FPP 1236 is a 20% glass filled chemically coupled homopolymer polypropylene product. Information provided by A. Schulman. |
|||
Tensile Strength, Yield | 70.0 MPa | 10200 psi | ISO R527 |
Hexcel® HexPly® ES70 120°C Curing Epoxy Matrix HexPly® ES70 is a structural epoxy resin particularly well adapted to low pressure molding processes. This system is versatile and allows a polymerization from 100°C (212°F) up to 150°C (302°F).. |
|||
Tensile Strength, Yield | 70.0 MPa | 10200 psi | ASTM D638 |
A. Schulman POLYFLAM™ E-13030B Reinforced Super Coupled Polypropylene Black DescriptionPolyfort® E-13030B is a reinforced super coupled polypropylene black. Information provided by A. Schulman. |
|||
Tensile Strength, Yield | 70.0 MPa | 10200 psi | ASTM-D638 |
Polyram RamTough RZ300G13 Polycarbonate, 13% Glass Fiber 13% glass fiber reinforced polycarbonate for injection molding applicationsInformation provided by Polyram Ram On Ind. |
|||
Tensile Strength, Yield | 70.0 MPa | 10200 psi | conditioned; ISO 527-1/-2 |
EMS-Grivory Grivory® TSGZ-15/4 PA666-GF15 Information provided by EMS Grivory |
|||
Tensile Strength, Yield | 70.0 MPa | 10200 psi | ISO 527-1/-2 |
DuPont Performance Polymers Delrin® FG100AL NC010 Acetal (POM)
(Unverified Data**) Lubricated High Viscosity Acetal Homopolymer with Low Wear and Low Friction Developed for Food Contact Applications Delrin FG100AL is a high viscosity lubricated acetal homopolymer resin containing .. |
|||
Tensile Strength, Yield | 70.0 MPa | 10200 psi | chs 2.0 in/min; ASTM D638 |
Diamond Polymers SAN 267 Styrene Acrylonitrile, Transparent Engineering Thermoplastic Information Provided by Diamond Polymers, Inc. & Network Polymers, Inc. |
|||
Tensile Strength, Yield | 70.0 MPa | 10200 psi | 50 mm/min; ISO 527 |
Eurostar Staramide B28H PA6, Heat Stabilized, Injection Molded Staramide B28H is a Heat Stabilized, Unreinforced Polyamide 6, Injection Molding ResinInformation provided by Eurostar. |
|||
Tensile Strength, Yield | 70.0 MPa @Temperature 23.0 °C |
10200 psi @Temperature 73.4 °F |
ISO 527 |
DuPont Performance Polymers Delrin® 100PE NC010A Acetal Homopolymer Delrin® 100PE NC010A is a high viscosity acetal homopolymer, an enhanced version of Delrin® 100P with extremely low VOC emissions. It has improved processing thermal stability, good mechanical pro.. |
|||
Tensile Strength, Yield | 70.0 MPa | 10200 psi | chs 0.2 in/min; ASTM D638 |
Diamond Polymers NPP30-0500 GF20 20% Glass Filled Black Homopolymer Polypropylene Information Provided by Diamond Polymers, Inc. & Network Polymers, Inc. |
|||
Tensile Strength, Yield | 70.0 MPa | 10200 psi | 50 mm/min; ISO 527-1/-2 |
BASF Ultramid® B3EG3 BK 00564 15% Glass Filled PA6 (Conditioned) Description: 15% glass-fiber reinforced injection-molding grade with enhanced impact resistance, for example, for vehicle mirror housings as well as for the wheels of mountain bikes.Information prov.. |
|||
Tensile Strength, Yield | 70.0 MPa | 10200 psi | 50 mm/min; ISO 527-1/-2 |
BASF Ultramid® B3GM35 BK 30564 15/25% Glass/Mineral Filled PA6 (Conditioned) Description: 25% mineral-filled and 15% glass-fiber reinforced injection-molding grade for industrial articles having medium rigidity and high dimensional stability, used e.g. for covers and handles.. |
|||
Tensile Strength, Yield | 70.0 - 95.0 MPa | 10200 - 13800 psi | Average value: 83.1 MPa Grade Count:6 |
Overview of materials for Nylon 66, 20% Mineral Filled This property data is a summary of similar materials in the MatWeb database for the category "Nylon 66, 20% Mineral Filled". Specific grades with primary filler content between 15% and 24% are inclu.. |
|||
Tensile Strength, Yield | 70.0 MPa @Temperature 23.0 °C |
10200 psi @Temperature 73.4 °F |
ISO 527 |
DuPont Performance Polymers Delrin® FG100P NC010 Acetal Homopolymer
(Unverified Data**) Delrin® FG100P is a high viscosity acetal homopolymer, with improved thermal stability for use in easy to fill molds. It has been developed for consideration into applications such as parts for the.. |