Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

Polymer Property : Tensile Strength, Yield = 86.0 MPa Product List

Mechanical Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.
Mechanical Properties Metric English Comments
Tensile Strength, Yield 86.0 MPa
12500 psi
dry; ISO 527-1
Murtfeldt Murylon® 6 Cast Nylon 6
Murylon® 6 CAST has extremely low levels of residual stress thanks to the casting procedure used to produce it. This material is therefore ideally suited to extensively processed components.Specia..
Tensile Strength, Yield 86.0 MPa
12500 psi
ASTM D638
NYCOA 400 PA 6
nucleated general molding gradeInformation provided by NYCOA, Inc.
Tensile Strength, Yield 86.0 MPa
12500 psi
ASTM D638
NYCOA 512 PA 6
UL and NSF rated nucleated general purpose molding gradeInformation provided by NYCOA, Inc.
Tensile Strength, Yield 86.0 MPa
12500 psi
50 mm/min; ASTM D638
Ovation Polymers OPTRENE 30GF Polypropylene, 30% Glass Reinforced
Properties of chemically coupled glass reinforced (30%) polypropylene with high strength and HDT. *All properties are measured after 48 hours of conditioning at 23°C and 50% relative humidity. All ..
Tensile Strength, Yield 86.0 MPa
12500 psi
SABIC - Japan Method
SABIC Innovative Plastics Lexan® LGN2000 PC (Asia Pacific)
Tensile Strength, Yield 86.0 MPa
12500 psi
ISO 527
Premix Thermoplastics PRE-ELEC® 12-033  (discontinued **)
PRE-ELEC 12-033 is a conductive thermoplastic compound based on a polyacetal copolymer with 30% carbon fiber. PRE-ELEC 12-033 exhibits excellent mechanical properties and electrical conductivity. Te..
Tensile Strength, Yield 86.0 MPa
12500 psi
ISO value at 50 mm/min.
BASF Capron® 5202 HS BK-102 Nylon 66 (Dry)  (discontinued **)
Capron 5202 HS BK-102 is an unfilled, heat stabilized, pigmented black nylon 6,6, injection molding compound. It combines strength and stiffness as well as excellent chemical resistance. The additi..
Tensile Strength, Yield 86.0 MPa
12500 psi
ISO value at 50 mm/min.
BASF Capron® 5202 HS Blend Nylon 66 (Dry)  (discontinued **)
Capron 5202 HS Blend is a blended, unfilled, heat stabilized, nylon 6,6, injection molding compound. It is also available in natural and pigmented versions. It combines strength and stiffness as wel..
Tensile Strength, Yield 86.0 MPa
12500 psi
ISO value at 50 mm/min.
BASF Capron® 8203C Nylon 6 (Dry)  (discontinued **)
Capron 8203C is a high viscosity, nylon 6 extrusion compound, possessing a modified crystalline structure for increased property performance and faster set up for tubing and cable applications. It..
Tensile Strength, Yield 86.0 MPa

@Temperature 22.0 °C
12500 psi

@Temperature 71.6 °F
25mm flat samples, compression moulded; ISO 527-4
Menzolit Menzolit® SMC 0390 Unsaturated Polyester UP
SMC 0390 is a standard low profile SMC. Because of its low shrinkage, the material shows good surface quality as well as very low warpage. The product is suitable for applications if a better surfac..
Tensile Strength, Yield 86.0 MPa
12500 psi
Type I, 5 mm/min; ASTM D638
SABIC Innovative Plastics LNP LUBRICOMP EL002 PEI
LNP* Lubricomp* EL002 is a compound based on Polyetherimide resin containing 10% PTFE. Added features of this material include: Internally Lubricated.
Tensile Strength, Yield 86.0 MPa
12500 psi
ISO 527
SABIC Innovative Plastics LNP LUBRICOMP EX00548C PEI
LNP LUBRICOMP* EX00548C is a compound based on Polyetherimide resin containing Proprietary Fillers. Added features of this material include: Clean Compounding System, Wear Resistant.
Tensile Strength, Yield 86.0 MPa
12500 psi
ISO 527 type 1 A
Solvay TECHNYL® A 50H1 PA66, DRY
Description: Flame retardant polyamide 66, unreinforced, heat stabilized, for injection molding.Available in: Asia Pacific, Europe, Latin America and North AmericaProduct Applications: This phospho..
Tensile Strength, Yield 86.0 MPa
12500 psi
5 mm/min; ISO 527
SABIC Innovative Plastics Valox® VIC4311 PBT
VALOX VIC4311 is a 30% glass filled, impact modified PBT with excellent epoxy adhesion. Automotive underhood applications such as ignition coil housings.
Tensile Strength, Yield 86.0 MPa
12500 psi
5 mm/min; ISO 527
SABIC Innovative Plastics LNP STAT-KON Noryl_HMC202M PPE+HIPS (Europe-Africa-Middle East)
DATA ON BK1005 ONLY.
Tensile Strength, Yield 86.0 MPa
12500 psi
5 mm/min; ISO 527
SABIC Innovative Plastics LNP STAT-KON Noryl_HMC202M PPE+PS
DATA ON BK1005 ONLY.
Tensile Strength, Yield 86.0 MPa
12500 psi
SABIC - Japan Method
SABIC Innovative Plastics LNP THERMOCOMP Lexan_LGN2000 PC (Asia Pacific)
Tensile Strength, Yield 86.0 MPa
12500 psi
50 mm/min; ISO 527
SABIC Innovative Plastics Noryl PKN4717 PPE+HIPS (Europe-Africa-Middle East)
NORYL PKN4717 is a PPO+PS concentrate for dilution with polystyrene resin for foam extrusion. It is suitable for (microwavable) food packaging and is compliant with US and European food contact regu..
Tensile Strength, Yield 86.0 MPa
12500 psi
Type I, 50 mm/min; ASTM D638
SABIC Innovative Plastics NORYL PKN4752 PPE+PS
PPE+PS blend. High Heat. Translucent with yellow tint in natural color. FDA compliant. Extrusion and Injection Molding. Typical applications include High Performance Food Packaging, Electronics and ..
Tensile Strength, Yield 86.0 MPa
12500 psi
Type I, 50 mm/min; ASTM D638
SABIC Innovative Plastics NORYL PKN4752 PPE+PS (Asia Pacific)
PPE+PS. Translucent. FDA compliant. High heat. Extrusion. Microwavable. Food, electrical/electronic packaging uses.
Tensile Strength, Yield 86.0 MPa
12500 psi
50 mm/min; ISO 527
SABIC Innovative Plastics NORYL PKN4752 PPE+PS (Europe-Africa-Middle East)
NORYL PKN4752 is a translucent, high heat PPO+PS extrusion grade for dilution with polystyrene resin. It is suitable for (microwavable) food packaging and is compliant with US and European food cont..
Tensile Strength, Yield 86.0 MPa
12500 psi
5 mm/min; ISO 527
SABIC Innovative Plastics LNP LUBRICOMP QFL32 PA 6/10
LNP* LUBRICOMP* QFL32 is a compound based on Nylon 6/10 containing 10% Glass Fiber, 15% PTFE. Added features of this grade include: Wear Resistant.
Tensile Strength, Yield 86.0 MPa
12500 psi
Type I, 5 mm/min; ASTM D638
SABIC Innovative Plastics LNP STAT-KON AE002 ABS
LNP* STAT-KON* AE002 is a compound based on ABS resin containing 10% Carbon Fiber. Added feature of this material is: Electrically Conductive.
Tensile Strength, Yield 86.0 MPa
12500 psi
Type I, 5 mm/min; ASTM D638
SABIC Innovative Plastics LNP STAT-KON DFD03 PC
LNP* STAT-KON* DFD03 is a compound based on Polycarbonate containing 15% Glass Fiber. Added feature of this grade is: Impact Modified.
Tensile Strength, Yield 86.0 MPa
12500 psi
5 mm/min; ISO 527
SABIC Innovative Plastics LNP THERMOCOMP WFB33E PBT (Europe-Africa-Middle East)
LNP *THERMOCOMP* WFB33E is a compound based on Polybutylene Terephalate resin containing Glass Fiber and Glass Bead. Added features include Easy Molding.
Tensile Strength, Yield 86.0 MPa
12500 psi
ASTM D638
Entec Hypro™ PPC-GF40 Natural Impact Polypropylene, 40% Glass Reinforced
Information provided by Entec
Tensile Strength, Yield 86.0 MPa
12500 psi
ISO 527
Azoty Tarnow™ TARNOFORM 300 XEC1 POM
Electrically conductive, carbon fiber reinforced injection molding grade suitable for the applications where increased strength and stiffness is required.Information provided by Zakłady Azotowe ..
Tensile Strength, Yield 86.0 MPa
12500 psi
50mm/min; ISO 527
BASF Ultramid® 8202CQ PA6 (Dry)
Ultramid 8202CQ is a low viscosity, PA6 injection molding homopolymer, possessing a modified crystalline structure or increased property performance and faster cycles. It is also available in pigme..
Tensile Strength, Yield 86.0 MPa
12500 psi
ISO value at 50 mm/min.
BASF Capron® 8203C HS Blend Nylon 6 (Dry)  (discontinued **)
Capron 8203C HS Blend is a heat stabilized, high viscosity nylon 6 extrusion compound possessing a modified crystalline structure for increased strength, stiffness and heat distortion temperature. ..
Tensile Strength, Yield 86.0 MPa
12500 psi
50 mm/min
Arkema Group Oroglas® V 044 Acrylic, Extrusion Grade  (discontinued **)
OROGLAS V 044 is an extrusion grade offering good compromise between physical properties and thermal resistance.OROGLAS V 044 is recommended for extrusion of profiles, tubes and sheets.ISO data prov..
Copyright © lookpolymers.com All Rights Reserved