Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Tensile Modulus | 1.80 GPa | 261 ksi | ISO 527-2 |
PolyOne Nymax™ 2024 HS UV 425C Grey Polyamide 66 (Nylon 66) The Nymax® Series of nylon 6/6 compounds have been specifically developed to deliver outstanding performance in a wide range of application areas. These materials are available with a broad range o.. |
|||
Tensile Modulus | 1.80 GPa | 261 ksi | ASTM D638 |
NCMT NanoPAC™ S205 High Performance Polypropylene Nanocomposite Characteristics: High stiffness Supplementary of ABS Good impact resistant Less shrinkage Good thermal conductivity Applications: Toys Industry AutomobileInformation provided by Nano Composite Mater.. |
|||
Tensile Modulus | 1.80 GPa | 261 ksi | ISO 527 |
Nilit FRIANYL A63 TF30 Nylon 6.6 for injection molding, 30% PTFE lubricated Nylon 6.6 for injection molding.Information provided by Frisetta Polymer, which merged into Nilit Plastics |
|||
Tensile Modulus | 1.80 GPa | 261 ksi | 1 mm/min; ISO 527 |
SABIC Innovative Plastics GELOY CR3020 ASA Low-gloss ASA for profile and capstock applications |
|||
Tensile Modulus | 1.80 GPa | 261 ksi | ASTM D638 |
Ineos ABS Lustran® 743 General Purpose, High-Impact
(discontinued **) Information provided by Bayer Corporation, Plastics DivisionLANXESS was spun-off from Bayer in early 2005. Business renamed Ineos ABS after INEOS acquires a majority shareholding under a JV with La.. |
|||
Tensile Modulus | 1.80 GPa | 261 ksi | |
Ineos ABS Lustran® QE 1110, Extrusion Grade
(discontinued **) Extrusion grade, for coextrusion to surfaces with extreme low gloss.Information provided by Bayer.LANXESS was spun-off from Bayer in early 2005. Business renamed Ineos ABS after INEOS acquires a ma.. |
|||
Tensile Modulus | 1.80 GPa | 261 ksi | |
Covestro Bayblend® KU 2-1446 Polycarbonate + ABS Blend
(discontinued **) Key Features:UnfilledPlatableSuitable processing methods:Injection moldingFilm extrusionProfile extrusionSheet extrusionBlow moldingInformation provided by Bayer Polymers.As of 1 September 2015, Bay.. |
|||
Tensile Modulus | 1.80 GPa | 261 ksi | Conditioned 50% RH; ISO 527 |
Manifattura Cattaneo PA 6 G Nylon Manifattura Cattaneo products are available in semi-finished forms such as bars, profiles, sheets and plates.Information provided by Manifattura Cattaneo s.p.a. |
|||
Tensile Modulus | 1.80 - 2.60 GPa @Thickness 2.00 mm |
261 - 377 ksi @Thickness 0.0787 in |
1.0 mm/min; ASTM D638 |
Solvay Specialty Polymers Solef® 1006 Polyvinylidene Fluoride (PVDF) Solef® 1006 PVDF is a very low viscosity homopolymer resin mainly used in injection molding or in multifilament extrusion.Features: Homopolymer; Low ViscosityUses: General PurposeAdditional Prope.. |
|||
Tensile Modulus | 1.80 GPa | 261 ksi | ISO 527-1/-2 |
Styrolution Polystyrol 486 M GR 2 PS Description: Polystyrol 486 M is a normal flowing, high-impact grade that is especially suitable for blends with a high proportion of general-purpose Polystyrol (preferably Polystyrol 165 H or Polys.. |
|||
Tensile Modulus | 1.80 GPa | 261 ksi | 1 mm/min; ISO 527 |
SABIC Innovative Plastics NORYL PX1181 PPE+HIPS (Europe-Africa-Middle East) Noryl* PX1181 PolyPhenylene Oxide (PPO*) + Polystyrene (PS) resin is an unfilled , injection moldable grade, with improved impact performances, an ISO 306 Vicat B/120 temperature of 120 deg C and a .. |
|||
Tensile Modulus | 1.80 GPa | 261 ksi | ISO 527-1/-2 |
Unitika A1025NO PA6, Flame Retardant, Conditioned Information provided by Unitika Ltd. |
|||
Tensile Modulus | 1.80 GPa | 261 ksi | ISO 527 |
Polyram RamLloy B001 Nylon 6/Polyolefin Alloy, Impact Modified Nylon 6/Polyolefin alloy, reduction of water absorption, impact modified, for injection molding applications.Information provided by Polyram. |
|||
Tensile Modulus | 1.80 GPa | 261 ksi | ASTM-D790 |
Polyram RamLloy PBB702 PC/ABS alloy, UV Stabilized UV stabilized PC/ABS alloy for injection molding applicationsInformation provided by Polyram Ram On Ind. |
|||
Tensile Modulus | 1.80 GPa | 261 ksi | ISO 527-2 |
Total PPH 4022 Polypropylene, Homopolymer ATOFINA Polypropylene PPH 4022 is a clarified nucleated homopolymer.ApplicationATOFINA Polypropylene PPH 4022 has been developed for extrusion-thermoforming, providing improved rigidity and impact r.. |
|||
Tensile Modulus | 1.80 GPa | 261 ksi | ASTM D638 |
Goodfellow TPX® DX350 Coating/Extrusion Grade Polymethylpentene This grade is highly recommended for paper coating or for fiber extrusion.TPX® is semi-crystalline, transparent, very light and - for a polyolefin - expensive. It has good release characteristics a.. |
|||
Tensile Modulus | 1.80 GPa | 261 ksi | At 1 mm/min; ISO 527-2 |
Borealis Bormed™ HD850MO Polypropylene Copolymer for Healthcare Applications Bormed HD850MO is a medium melt flow rate polypropylene homo polymer using the Borealis Nucleation Technology (BNT). This provides a polypropylene with excellent dimensional stability and its high c.. |
|||
Tensile Modulus | 1.80 GPa | 261 ksi | ASTM-D790 |
Polyram RamShine PAS701 ASA, UV Stabilized UV stabilized general purpose injection molding ASAInformation provided by Polyram Ram On Ind. |
|||
Tensile Modulus | 1.80 GPa | 261 ksi | ISO 527 |
Eastman DuraStar DS1000 Polymer, Natural Durastar DS1000 polymer has excellent appearance and clarity. Its most outstanding features are chemical resistance and excellent processing characteristics. Exposure to aromatic oils often causes c.. |
|||
Tensile Modulus | 1.80 GPa | 261 ksi | ISO 527 |
Eastman DuraStar MN610 Polymer, Natural Durastar MN610 polymer has excellent appearance and is nearly water-clear. Its most outstanding features are toughness, chemical resistance, and excellent processing characteristics. MN610 has very .. |
|||
Tensile Modulus | 1.80 GPa | 261 ksi | dry; ISO 527-1/-2 |
DSM Akulon® Fuel Lock FL-LP PA6 Low fuel permeation PA6 suitable for use in injection molding/welding of small engine fuel tanks, UV stabilized |
|||
Tensile Modulus | 1.80 GPa | 261 ksi | Storage |
Epoxy Technology EPO-TEK® 320 Optical, Opaque Epoxy Product Description: EPO-TEK® 320 is a two component, black-colored and optically opaque epoxy designed for optical, medical, and optoelectronic packaging of semiconductor devices and components. .. |
|||
Tensile Modulus | 1.80 GPa | 261 ksi | ASTM D638 |
Aclo Accucomp ABS ABS827L Electroplating Grade |
|||
Tensile Modulus | 1.80 GPa | 261 ksi | ASTM D638 |
Aclo Accucomp Polycarbonate POL050L Low Viscosity |
|||
Tensile Modulus | 1.80 GPa | 261 ksi | ASTM D638 |
Aclo Accutech Polypropylene Copolymer CP0436W20L1 Wollastonite Reinforced |
|||
Tensile Modulus | 1.80 GPa | 261 ksi | ISO 527-1 |
Barlog Plastics KEBATER B511T PBT unreinforced, super tough PBT-IInformation provided by BARLOG plastics GmbH. |
|||
Tensile Modulus | 1.80 GPa | 261 ksi | 1mm/min; ISO 527 |
BASF Ultramid® 8350 HS PA6 (Dry) Ultramid 8350 HS is a heat stabilized, impact modified type 6 graft copolymer developed for extrusion, tubing, and jacketing applications requiring a high level of toughness combined with a moderate.. |
|||
Tensile Modulus | 1.80 GPa | 261 ksi | ASTM D638 |
Aclo Accucomp Polystyrene HS0600L High Impact |
|||
Tensile Modulus | 1.80 GPa | 261 ksi | ISO 527-1/-2 |
Unitika ET2025 PA6, Dry High-impact nylonInformation provided by Unitika Ltd. |
|||
Tensile Modulus | 1.80 GPa | 261 ksi | 1 mm/min; ISO 527 |
SABIC Innovative Plastics LNP Thermotuf P1000EI3 PA 6 (Europe-Africa-Middle East) High Impact Nylon 6 compound containing Impact Modifier.This data was supplied by SABIC-IP for the Europe-Africa-Middle East region. |