Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Tensile Strength, Ultimate | 17.0 MPa | 2470 psi | Y direction; 0.1/min strain rate; ASTM D638 |
Rogers Corporation RT/duroid® 6006 Ceramic-PTFE Composite Microwave Laminate Features:High dielectric constant for circuit size reductionLow loss - Ideal for operating at X-band or belowTight dielectric constant and thickness control for repeatable circuit performanceLow moi.. |
|||
Tensile Strength, Ultimate | 17.0 - 32.4 MPa | 2470 - 4700 psi | Average value: 25.1 MPa Grade Count:10 |
Overview of materials for Thermoplastic Olefinic Elastomer (TPO), Blow Molding Grade This property data is a summary of similar materials in the MatWeb database for the category "Thermoplastic Olefinic Elastomer (TPO), Blow Molding Grade". Each property range of values reported is m.. |
|||
Tensile Strength, Ultimate | 17.0 MPa | 2470 psi | ASTM D638 |
ExxonMobil Escorene® LD-705 High EVA Film Resin
(discontinued **) Data provided by the manufacturer, Exxon Chemical.A fractional melt index, 13.3% vinyl acetate copolymer specialty film resin for applications requiring outstanding heat sealability, strength, and t.. |
|||
Tensile Strength, Ultimate | 17.0 MPa | 2470 psi | ASTM D638 |
ExxonMobil Escorene® LD-613 EVA Injection Molding Resin
(discontinued **) Data provided by the manufacturer, Exxon Chemical.An 8.8% vinyl acetate copolymer resin designed for molding and extrusion applications requiring low temperatures, flexibility and toughness. This r.. |
|||
Tensile Strength, Ultimate | 17.0 MPa | 2470 psi | ASTM D638 |
Huntsman PE1501 EVA Film Extrusion
(discontinued **) 5% Vinyl Acetate EVA copolymer and FDA compliantFeatures: Yields film with excellent impact strength, good heat seal, and good clarity.Applications: Film extrusion: greenhouse film, heavy-duty packa.. |
|||
Tensile Strength, Ultimate | 17.0 MPa | 2470 psi | ASTM D638 |
Huntsman PE1503 EVA Film Extrusion
(discontinued **) 5% Vinyl Acetate EVA copolymer and FDA compliantFeatures: Excellent balance of optical and strength, toughness and flexibility at low temperatures, and good heat seal characteristic.Applications: Fi.. |
|||
Tensile Strength, Ultimate | 17.0 MPa | 2470 psi | ASTM D638 |
Solvay Specialty Polymers Algoflon® 55BZ+5Mos PTFE; Bronze/Molybdenum Disulphide Filled
(discontinued **) Data provided by the manufacturer.55 wt.% Bronze + 5 wt.% MoS2. Suspension polymer powder grade recommended for compression molding. Pure PTFE possesses high inertness, excellent dielectric properti.. |
|||
Tensile Strength, Ultimate | 17.0 MPa @Thickness 2.00 mm |
2470 psi @Thickness 0.0787 in |
ASTM D4894 |
3M Dyneon™ TF 4303 PTFE 15% Graphite Filled
(discontinued **) Type II PTFE. Applications include sliding surfaces, bearings, seals/gaskets.Data provided by Dyneon. |
|||
Tensile Strength, Ultimate | 17.0 MPa | 2470 psi | Compounded Tire |
Epichlorohydrin Rubber (CO, ECO) CO is the ISO designation for the homopolymer and ECO is the ISO designation for the ethylene oxide copolymer. Epichlorohydrin rubber is generally damaged by chlorinated solvents, ketones, aldehyde.. |
|||
Tensile Strength, Ultimate | 17.0 MPa | 2470 psi | Compounded Tire |
Propylene Oxide Rubber (GPO) Allyl glycidyl ether is a common copolymer with propylene oxide. Good low temperature properties and oxidation/UV resistance but poor oil resistance. |
|||
Tensile Strength, Ultimate | 17.0 MPa | 2470 psi | |
Ethylene Propylene Rubber (EPM, EPDM) Satisfactory compatibility with fireproof hydraulic fluids, ketones, hot and cold water, alkalis, and ozone/strong oxidizing chemicals. Unsatisfactory compatibility with most oils, gasoline, kerosen.. |
|||
Tensile Strength, Ultimate | 17.0 MPa | 2470 psi | ASTM D412 |
KKPC KOSYN KTR 301 Thermoplastic Elastomer (TPE) Thermoplastic Elastomer (TPE)Characteristics: KOSYN KTR101 is linear block copolymer made by solution polymerization which polymerizes butadiene and styrene in organic solvent. It is thermoplastics .. |
|||
Tensile Strength, Ultimate | 17.0 MPa | 2470 psi | ASTM D638 |
LyondellBasell Astryn 75A6-2 Polypropylene Copolymer, 20% Calcium Carbonate Key Features: conventional melt flow, medium modulus, mineral-filled polypropylene copolymer, high impact, excellent chemical resistance, excellent aesthetics, high gloss, good colorability, good pr.. |
|||
Tensile Strength, Ultimate | 17.0 MPa | 2470 psi | ISO R527-1 |
LyondellBasell Hifaxâ„¢ CB229 Thermoplastic Olefin Resin Key Features: medium high melt flow, medium high modulus, paintable thermoplastic elastomeric olefin resin, excellent impact and stiffness balance, good dimensional stability, excellent processabili.. |
|||
Tensile Strength, Ultimate | 17.0 MPa | 2470 psi | at max load; ISO 527 |
A. Schulman FORMION™ FI 341 Ionomer Information provided by A. Schulman. |
|||
Tensile Strength, Ultimate | 17.0 MPa | 2470 psi | at max load; ISO 527 |
A. Schulman FORMION™ FI 341 Ionomer Information provided by A. Schulman. |
|||
Tensile Strength, Ultimate | 17.0 MPa | 2470 psi | at max load; ISO 527 |
A. Schulman FORMION™ FI 341 Ionomer Information provided by A. Schulman. |
|||
Tensile Strength, Ultimate | 17.0 MPa | 2470 psi | at max load; ISO 527 |
A. Schulman FORMION™ FI 341 Ionomer Information provided by A. Schulman. |
|||
Tensile Strength, Ultimate | 17.0 MPa | 2470 psi | at max load; ISO 527 |
A. Schulman FORMION™ FI 341 Ionomer Information provided by A. Schulman. |
|||
Tensile Strength, Ultimate | 17.0 MPa | 2470 psi | at max load; ISO 527 |
A. Schulman FORMION™ FI 395 Ionomer Information provided by A. Schulman. |
|||
Tensile Strength, Ultimate | 17.0 MPa | 2470 psi | ASTM D638/D412 |
Covestro Baydur® SFR-243 Polyurethane Composite RRIM Foam, 15% Milled Glass Filled, MDI-based 2-Component Liquid System 0.25 in. thickness.Information provided by Bayer Corporation, Polyurethanes DivisionAs of 1 September 2015, Bayer MaterialScience was separated from Bayer AG and officially adopted its new name – C.. |
|||
Tensile Strength, Ultimate | 17.0 MPa @Temperature 250 °C |
2470 psi @Temperature 482 °F |
ASTM D638 |
Asahi Glass Fluon® P-66P PFA Perfluoropolymer Fluon® PFA is a copolymer of tetrafluoroethylene (C2F4) and perfluoroalkoxyethylene, which has excellent chemical, electrical, mechanical and surface properties. PFA retains many inherent character.. |
|||
Tensile Strength, Ultimate | 17.0 MPa | 2470 psi | ASTM D638 |
A. Schulman ComAlloy Hiloy® 152 Polypropylene, Mineral Reinforced Data provided by the manufacturer, ComAlloy International Company.20% Mineral Reinforced.The ComAlloy product line has been integrated into the A Schulman product line. |
|||
Tensile Strength, Ultimate | 17.0 - 30.1 MPa | 2470 - 4370 psi | Average value: 24.5 MPa Grade Count:6 |
Overview of materials for Linear Low Density Polyethylene (LLDPE), Rotational Molding Grade This property data is a summary of similar materials in the MatWeb database for the category "Linear Low Density Polyethylene (LLDPE), Rotational Molding Grade". Each property range of values report.. |
|||
Tensile Strength, Ultimate | 17.0 MPa | 2470 psi | ASTM D638 |
LyondellBasell Astryn 73A6-3 Polypropylene Copolymer, 30% Calcium Carbonate Key Features: medium high melt flow, medium modulus, mineral-filled polypropylene copolymer, excellent impact and stiffness balance, excellent chemical resistance, excellent aesthetics, high gloss, .. |
|||
Tensile Strength, Ultimate | 17.0 - 26.5 MPa | 2470 - 3840 psi | Average value: 20.9 MPa Grade Count:19 |
Overview of materials for High Density Polyethylene (HDPE), Crosslinkable This property data is a summary of similar materials in the MatWeb database for the category "High Density Polyethylene (HDPE), Crosslinkable". Each property range of values reported is minimum and .. |
|||
Tensile Strength, Ultimate | 17.0 MPa | 2470 psi | butt tensile strength per ASTM D426 on brass |
Von Roll Isola IMI E-Solder® 3025 Electrically Conductive Adhesive Data provided by Von Roll Isola USA.E-SOLDER® epoxy based resin systems can be used at room temperature on heat sensitive materials, can bond dissimilar materials, and do not have flux or residue t.. |
|||
Tensile Strength, Ultimate | 17.0 MPa | 2470 psi | Compounded Tire |
Fluorocarbon Rubber (FPM), Low Temperature Grade Fluorocarbon rubbers are very stable toward degradation by chemicals, heat, and oxidation. Some chemicals that attack FPM include ketones, low molecular weight esters, and nitrogen containing solve.. |
|||
Tensile Strength, Ultimate | 17.0 - 303 MPa | 2470 - 43900 psi | Average value: 115 MPa Grade Count:6 |
Overview of materials for Thermoset Polyurethane Foam, Glass Filled This property data is a summary of similar materials in the MatWeb database for the category "Thermoset Polyurethane Foam, Glass Filled". Each property range of values reported is minimum and maximu.. |