Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Tear Strength | 45.1 kN/m | 257 pli | post cured- 8 hours at 177°C; Die B |
Multibase SILASTIC® Q7-4765 Dow-Corning Biomedical Grade ETR Elastomer Information provided by Multibase |
|||
Tear Strength | >= 45.0 kN/m | >= 257 pli | |
P & P Technology Silver/Aluminum Conductive Adhesive P & P Technology conductive silver/aluminum adhesive is a one part electrically conductive room temperature curing elastomer. It is supplied as a readily extrudable paste that cures rapidly when exp.. |
|||
Tear Strength | 45.1 kN/m | 257 pli | 73°F, Die C; ASTM D624 |
ExxonMobil Santoprene® 281-87MED Thermoplastic Elastomer
(discontinued **) A hard, colorable, specialty thermoplastic vulcanizate (TPV) in the thermoplastic elastomer (TPE) family. USP Class VI Certificates of Compliance exist for representative samples of our medical grad.. |
|||
Tear Strength | 45.1 kN/m | 257 pli | 0.025" extruded film; DIN 53515 |
Huntsman IROGRAN® A 75 P 4655 N TPU-Polyester Introduction: IROGRAN A 75 P 4655 N is a black colored polyether based thermoplastic polyurethane intended for injection molding applications. IROGRAN A 75 P 4655 N is a part of the HUNTSMAN injecti.. |
|||
Tear Strength | 45.0 kN/m | 257 pli | |
Huntsman IROGRAN® A 78 P 4766 NM Ether-Based TPU-For Cable Industry TransparentInformation provided by Huntsman |
|||
Tear Strength | 45.0 kN/m | 257 pli | Die B |
Momentive Performance Materials Addisilâ„¢ 1170 M Industrial Molding Heat Cured Rubber Heat cured rubber is a high consistency product that can be molded, extruded or calendered using conventional rubber processing equipment to meet a wide range of cost, durability and performance sta.. |
|||
Tear Strength | 45.0 kN/m | 257 pli | Die B |
Momentive Performance Materials Siloprenâ„¢ LSR 3286/60 Liquid Silicone Rubber - Self-Lubricating / Low Compression Set This LSR elastomer is a self-lubricating, low compression set, two-component, platinum (addition/heat) curable, and pumpable silicone elastomer that can be molded and cured with very fast cycle time.. |
|||
Tear Strength | 45.0 kN/m | 257 pli | Die B |
Momentive Performance Materials Siloprenâ„¢ LSR 4640 Liquid Silicone Rubber - Healthcare LSR elastomers are a two-component, platinum (addition/heat) curable, and pumpable silicone elastomer that can be molded and cured with very fast cycle times, at elevated temperatures. The molding .. |
|||
Tear Strength | 45.0 kN/m | 257 pli | Die B |
Momentive Performance Materials Silplusâ„¢ 70 HS High Strength Heat Cured Rubber Heat cured rubber is a high consistency product that can be molded, extruded or calendered using conventional rubber processing equipment to meet a wide range of cost, durability and performance sta.. |
|||
Tear Strength | 45.0 kN/m | 257 pli | ISO 34B |
Huntsman AVALON® 65 AK Thermoplastic Polyurethane Performance Features: AVALON® injection molding products are trusted worldwide to deliver:Outstanding flex performanceExcellent slip resistancePerfect surface definitionTransparency and transluce.. |
|||
Tear Strength | 45.0 kN/m | 257 pli | Die C; ISO 34-1B |
Lubrizol Advanced Materials PEARLCOAT® Activa D118K Thermoplastic Polyurethane Elastomer PEARLCOAT® Activa D118K is a polycaprolactone copolyester based thermoplastic polyurethane of low hardness, supplied in form of natural pellets. This product gives an inherent “low gloss asp.. |
|||
Tear Strength | 45.1 kN/m | 257 pli | Die B,post cured- 2 hours at 177°C; ASTM D624 |
Multibase C6-540 Dow-Corning Class VI Elastomer Information provided by Multibase |
|||
Tear Strength | 45.0 kN/m | 257 pli | ISO 34/1 |
A. Schulman INVISION™ VX-5085UI Soft Touch Polyolefin Thermoplastic DescriptionInvision™ VX-5085UI is a UV-stabilized polyolefin-based thermoplastic elastomer of 85 Shore A durometer, which has been formulated for easy moldability, soft touch, low gloss, and excell.. |
|||
Tear Strength | 45.0 kN/m | 257 pli | ISO 34/1 |
A. Schulman INVISION™ VX-5085UI Soft Touch Polyolefin Thermoplastic DescriptionInvision™ VX-5085UI is a UV-stabilized polyolefin-based thermoplastic elastomer of 85 Shore A durometer, which has been formulated for easy moldability, soft touch, low gloss, and excell.. |
|||
Tear Strength | >= 45.0 kN/m | >= 257 pli | |
Trelleborg Offshore Vikotherm™ 73585 Insulative Elastomer Vikotherm™ is a rubber elastomer chemically modified to provide very high insulating characteristics while maintaining its inherent rubber properties in respect of seawater resistance, pressure res.. |
|||
Tear Strength | 45.0 kN/m | 257 pli | with incision; ISO 34B |
Lubrizol ESTANE® GP75AE Ester Based Thermoplastic Polyurethane Type: Estane® GP 75AE is an aromatic polyester-based thermoplastic polyurethane (TPU).Appearance: Translucent spherical pelletsUses: Injection molding partsAvailable in EuropeInformation provided b.. |
|||
Tear Strength | 45.0 kN/m | 257 pli | ISO 34/1 |
A. Schulman INVISION™ VX-5085UI Soft Touch Polyolefin Thermoplastic DescriptionInvision™ VX-5085UI is a UV-stabilized polyolefin-based thermoplastic elastomer of 85 Shore A durometer, which has been formulated for easy moldability, soft touch, low gloss, and excell.. |
|||
Tear Strength | 45.0 kN/m | 257 pli | ISO 34/1 |
A. Schulman INVISION™ VX-5085UI Soft Touch Polyolefin Thermoplastic DescriptionInvision™ VX-5085UI is a UV-stabilized polyolefin-based thermoplastic elastomer of 85 Shore A durometer, which has been formulated for easy moldability, soft touch, low gloss, and excell.. |
|||
Tear Strength | 45.0 kN/m | 257 pli | |
TSE Industries Millathane® 76 Millable Polyester Polyurethane Rubber, 20 PHR Carbon Black, N-990 (MT) Millathane® 76 is a very suitable choice for use in products such as bushings, small copier rolls; automotive applications — bumpers, o-rings, hydraulic seals, belts, gaskets, solid tires — and m.. |
|||
Tear Strength | 45.0 kN/m | 257 pli | Method C; ISO 34 |
ELASTO UK Dryflex® 5049-110 TPE, Modified Injection Molding Grade for Auto Mud Flaps The VTC TPE Group have developed endless formulations to fulfill different properties and application requirements to optimize the finished component. VTC Dryflex® 5049-110 is specifically designe.. |
|||
Tear Strength | 45.0 kN/m | 257 pli | DIN ISO 34-1/Bb |
BASF Elastollan C 75 A HPM TPUR Description: Thermoplastic Polyester Polyurethane Elastomers with excellent mechanical properties and chemical resistance, outstanding wear resistance, high tear and tensile strength, good damping c.. |
|||
Tear Strength | >= 45.0 kN/m | >= 257 pli | ISO 34 |
Austin Novel Materials Texalan® 265A Polyester-based TPU Description: Good abrasion resistance, tensile strength, oil resistance and transparency which can meet different demands in various industryInformation from Dawnentech |
|||
Tear Strength | 45.0 kN/m | 257 pli | ISO 34-B |
AlphaGary Evoprene™ GC 5652 SEBS Thermoplastic Elastomer Evoprene™ GC compounds are based on styrene ethylene- butylene styrene block copolymers. Evoprene™ GC series was created to provide cost effective solutions for processors and end users alike. Can.. |
|||
Tear Strength | 45.0 kN/m | 257 pli | |
AorTech Biomaterials Elast-Eon™ E5-130 Biomedical Polyurethane Pellets Elast-Eon™ polymers are used in biomedical applications. They have high biostability so they can be used for long term implantation. |
|||
Tear Strength | 45.0 kN/m | 257 pli | |
Trelleborg R721 Natural Rubber Polyisoprene All information provided by Trelleborg |
|||
Tear Strength | 45.0 kN/m | 257 pli | ISO 34-B |
AlphaGary Evoprene™ G 975 SEBS Thermoplastic Elastomer Evoprene™ G compounds are styrene – ethylene butylene –styrene base thermoplastic elastomer with related hydrogenated block copolymers. These polymers are fully saturated so the resistance to oxi.. |
|||
Tear Strength | 45.0 kN/m | 257 pli | DIN 53515 |
Lubrizol ESTANE® 58202 Ether Based Thermoplastic Polyurethane (European Grade) Description: Estane® thermoplastic polyurethanes (TPUs) include elastomeric materials that bridge the gap between flexible rubber and rigid plastics. These materials offer toughness and durability .. |
|||
Tear Strength | 45.0 kN/m | 257 pli | DIN 53515 |
Lubrizol ESTANE® 58213 Ester Based Thermoplastic Polyurethane (European Grade) Description: Estane® thermoplastic polyurethanes (TPUs) include elastomeric materials that bridge the gap between flexible rubber and rigid plastics. These materials offer toughness and durability .. |
|||
Tear Strength | 45.0 kN/m | 257 pli | DIN 53515 |
Lubrizol ESTANE® T5083 Ether Based Thermoplastic Polyurethane (European Grade) Description: Estane® thermoplastic polyurethanes (TPUs) include elastomeric materials that bridge the gap between flexible rubber and rigid plastics. These materials offer toughness and durability .. |