Thermal Properties | Metric | English | Comments |
---|---|---|---|
Vicat Softening Point | 126 °C | 259 °F | ASTM D1525 |
Network Polymers NPP 50-0350 Description: High Density Polyethylene (HDPE)Information provided by Network Polymers Inc. |
|||
Vicat Softening Point | 126 °C | 259 °F | Rate B/50; ISO 306 |
SABIC Innovative Plastics Cycoloy® CU1650 PC+ABS (Europe-Africa-Middle East) UV stabilized, non-FR PC/ABS of excellent flow and impact performanceThis data was supplied by SABIC-IP for the Europe-Africa-Middle East region. |
|||
Vicat Softening Point | 126 °C | 259 °F | Rate B/50; ISO 306 |
SABIC Innovative Plastics Cycoloy® CY9650 PC+ABS PC+ABS, High Impact and High Flow, ductility at low temperature, excellent properties retention after Hydrolytic and Heat AgingThis data was supplied by SABIC-IP for the Americas region. |
|||
Vicat Softening Point | 126 °C | 259 °F | Rate B/50; ASTM D 1525 |
SABIC Innovative Plastics Cycoloy® CY9650 PC+ABS (Europe-Africa-Middle East) PC+ABS, High Impact and High Flow, ductility at low temperature, excellent properties retention after Hydrolytic and Heat AgingThis data was supplied by SABIC-IP for the Europe-Africa-Middle East re.. |
|||
Vicat Softening Point | 126 °C | 259 °F | Rate B/50; ISO 306 |
SABIC Innovative Plastics Cycoloy® CY9650 PC+ABS (Europe-Africa-Middle East) PC+ABS, High Impact and High Flow, ductility at low temperature, excellent properties retention after Hydrolytic and Heat AgingThis data was supplied by SABIC-IP for the Europe-Africa-Middle East re.. |
|||
Vicat Softening Point | 126 °C | 259 °F | Rate B/50; ISO 306 |
SABIC Innovative Plastics Cycoloy® HC1204HF PC+ABS (Europe-Africa-Middle East) High heat PC/ABS blend offering good flow and excellent impact. For medical devices and pharmaceutical applications. Healthcare management of change, biocompatible (ISO10993 or USP Class VI). |
|||
Vicat Softening Point | 126 °C | 259 °F | ASTM D1525 |
Polymer Industries Densetec HMW Sheet Polymer Industries’ Densetec HMW is the extruded material needed when Densetec HDPE is not enough and Polyslick UHMW™ is not necessary. Densetec HMW has higher impact strength than HDPE and is mor.. |
|||
Vicat Softening Point | 126 °C | 259 °F | Rate B/50; ISO 306 |
SABIC Innovative Plastics Cycoloy® C1100HF PC+ABS (Europe-Africa-Middle East) CYCOLOY C1100HF is the improved flow version of CYCOLOY C1100 and has been developed to better fill long and complex parts while maintaining still excellent mechanical properties. Its superior flow .. |
|||
Vicat Softening Point | 126 °C | 259 °F | Rate B/50; ASTM D1525 |
SABIC Innovative Plastics Cycoloy® CP8930 PC+ABS (Asia Pacific) High heat, PC/ABS for automotive electro plating applications, excellent balance in flow/impact |
|||
Vicat Softening Point | 126 °C | 259 °F | Rate B/50; ISO 306 |
SABIC Innovative Plastics Cycoloy® CU1650 PC+ABS UV stabilized, non-FR PC/ABS of excellent flow and impact performance |
|||
Vicat Softening Point | 126 °C | 259 °F | ASTM D1525 |
Chevron Phillips HiD® 9410 HDPE Blow Molding Resin
(discontinued **) Resin Type: Linear Copolymer; Blow Molding ResinCharacteristics: Medium Molecular Weight Distribution, Wide Range of Processing Conditions, Good Parison Uniformity, Good TrimabilityApplications:Phar.. |
|||
Vicat Softening Point | 126 °C | 259 °F | ASTM D1525 |
NOVA Chemicals Sclair® 59F HDPE Blow Molding Resin
(discontinued **) Features: High impact resistance, good stiffness, moderate ESCR.Applications: Food packaging, small parts (HIC), oil bottles.Data provided by the manufacturer. |
|||
Vicat Softening Point | 126 °C | 259 °F | ISO 306 |
Total Lacqtene® 2004 TN 52 HDPE pipe
(discontinued **) LACQTENE® 2004 TN 52 is a high density polyethylene produced by the gas phase polymerization process with hexene as comonomer. LACQTENE® 2004 TN 52 is best processed between 190 and 230°C.Informa.. |
|||
Vicat Softening Point | 126 °C | 259 °F | ASTM D1525 |
LyondellBasell Alathon® ETP H5057 High Density Polyethylene ApplicationsALATHON H 5057 is a multi-purpose high-flow resin that exhibits enhanced low temperature impact performance, enhanced processability and thermal stability for fast cycling in multi-cavit.. |
|||
Vicat Softening Point | 126 °C | 259 °F | ASTM D1525 |
LyondellBasell Alathon® H5520 High Density Polyethylene ApplicationsALATHON H 5520 provides good processing characteristics and exhibits excellent toughness and color as well as low odor and good molded-part stability. Typical applications include house.. |
|||
Vicat Softening Point | 126 °C | 259 °F | ASTM D1525 |
LyondellBasell Petrothene® LR732001 High Density Polyethylene (Blow Molding Grade) ApplicationsThe PETROTHENE LR 7320 series of polyethylene resins exhibits an excellent balance of stiffness and environmental stress crack resistance. Typical applications include bottles for bleac.. |
|||
Vicat Softening Point | 126 °C | 259 °F | ASTM D1525-97 |
Ipiranga Petrochem PRB 4215 Polypropylene The production of polypropylene (PP) employs Spheripol technology from Montell / Italy. This technology has been acclaimed all over the world and is known as clean technology, because it does not pr.. |
|||
Vicat Softening Point | 126 °C | 259 °F | ASTM D1525 |
LyondellBasell Petrothene® LP510300 High Density Polyethylene ApplicationsPETROTHENE LLP 5103-00 is a copolymer resin designed for blown film applications. This resin offers high stiffness, excellent appearance and bubble stability and good drawdown. It is r.. |
|||
Vicat Softening Point | 126 °C | 259 °F | ASTM D1525 |
Global S-5000 High Density Polyethylene Description-good for monofilament Applications-ropes, fishing net, agricultural net and sports netInformation provided by Global Polymers Corporation. |
|||
Vicat Softening Point | 126 °C | 259 °F | Rate B/50; ASTM D1525 |
SABIC Innovative Plastics XYLEX HX7509HP PC+POLYESTER (Europe-Africa-Middle East) Medium flow, polycarbonate/Polyester alloy; contains mold release. For medical devices and pharmaceutical applications. Healthcare management of change, biocompatible (ISO 10993 or USP Class VI), fo.. |
|||
Vicat Softening Point | 126 °C | 259 °F | Rate B/50; ASTM D1525 |
SABIC Innovative Plastics XYLEX X7509HP PC+POLYESTER PC+Polyester alloy. Houseware applications. USA/Europe Food contact. this grade will no longer be supported with biocompatibility information and should not be used for medical applications which r.. |
|||
Vicat Softening Point | 126 °C | 259 °F | Rate B/50; ASTM D 1525 |
SABIC Innovative Plastics Xylex X7509UV PC+POLYESTER (Asia Pacific) PC+POLYESTER, Transparent, UV-Stabilized,This data was supplied by SABIC-IP for the Asia Pacific region. |
|||
Vicat Softening Point | 126 °C | 259 °F | Rate B/50; ISO 306 |
SABIC Innovative Plastics Xylex X7509UV PC+POLYESTER (Asia Pacific) PC+POLYESTER, Transparent, UV-Stabilized,This data was supplied by SABIC-IP for the Asia Pacific region. |
|||
Vicat Softening Point | 126 °C | 259 °F | Rate B/50; ISO 306 |
SABIC Innovative Plastics Xenoy® XD1607 PBT+PC (Europe-Africa-Middle East) 22% Glass filled PBT+PC with a designed balance between surface appearance and mechanical properties sufficient for automotive doorhandle requirements. Special suitable for gas assist mouldings .Thi.. |
|||
Vicat Softening Point | 126 °C | 259 °F | Rate B/120; ISO 306 |
SABIC Innovative Plastics Xylex X7529 PC+POLYESTER (Europe-Africa-Middle East) PC+ POLYESTER unreinforced alloy developed for optical or lense market. Good flow with good impact and excellent optical quality. UV 400nm block.This data was supplied by SABIC-IP for the Europe-Afr.. |
|||
Vicat Softening Point | 126 °C | 259 °F | ASTM D1525 |
SCG Chemicals EL-Leneâ„¢ H5480S High Density Polyethylene Monofilament Key Characteristics:High tenacityExcellent product colorRecommended Applications: Monofilament and flat yarn extrusion for manufacturing of nets, ropes and tarpaulinInformation provided by SCG Chem.. |
|||
Vicat Softening Point | 126 °C | 259 °F | ISO 306 |
Unipetrol PE HD LITEN® MB/ML 72 HDPE Made for injection molding applications.Information provided by Unipetrol RPA |
|||
Vicat Softening Point | 126 °C | 259 °F | ASTM D1525 |
Diamond Polymers NPP50-1111 TF20 20% Talc Filled White High Density Polyethylene Information Provided by Diamond Polymers, Inc. & Network Polymers, Inc. |
|||
Vicat Softening Point | 126 °C @Load 1.02 kg |
259 °F @Load 2.25 lb |
ASTM-D1525 |
Braskem GP100OR HDPE High Density Extrusion Polyethylene GP100OR is a high-density polyethylene compound specially developed for the manufacturing of extruded pipes for gas distribution. It is produced with bimodal technology and has high molar mass. It s.. |
|||
Vicat Softening Point | 126 °C | 259 °F | ISO 306 |
Unipetrol PE HD LITEN® MB/ML 57 HDPE Made for injection molding applications.Information provided by Unipetrol RPA |