Thermal Properties | Metric | English | Comments |
---|---|---|---|
Vicat Softening Point | 91.0 °C @Load 1.00 kg |
196 °F @Load 2.20 lb |
ISO 306/A |
Polimeri Europa Riblene® FF 20 Low Density Polyethylene - Blown Film Extrusion Riblene FF 20 is a high molecular weight low density polyethylene (LDPE) suitable for blown film extrusion. Riblene FF 20 is characterized by a good melt strength leading to a good bubble stability.. |
|||
Vicat Softening Point | 91.0 °C @Load 1.00 kg |
196 °F @Load 2.20 lb |
ISO 306/A |
Polimeri Europa Riblene® FF 29 Low Density Polyethylene - Blown Film Extrusion Riblene FF 29 is a high molecular weight low density polyethylene (LDPE), suitable for blown film extrusion. Riblene FF 29 is characterized by a good melt strength leading to a good bubble stabilit.. |
|||
Vicat Softening Point | 91.0 °C | 196 °F | Rate B/50; ISO 306 |
SABIC Innovative Plastics Cycolac® MG8000SR ABS (Asia Pacific) This data was supplied by SABIC-IP for the Asia Pacific region. |
|||
Vicat Softening Point | 91.0 °C | 196 °F | Rate B/50; ASTM D1525 |
SABIC Innovative Plastics Cycoloy® CM6140 PC+ABS Cycoloy resin grade CM6140 is a flame retardant, filled PC/ABS blend. It is of non-brominated & non-chlorinated FR system to meet UL94 V0 at 0.8mm. Key features include thin wall FR, higher stiffnes.. |
|||
Vicat Softening Point | 91.0 °C | 196 °F | Rate B/50; ASTM D1525 |
SABIC Innovative Plastics Cycoloy® CM6140 PC+ABS (Asia Pacific) Cycoloy resin grade CM6140 is a flame retardant, filled PC/ABS blend. It is of non-brominated & non-chlorinated FR system to meet UL94 V0 at 0.8mm. Key features include thin wall FR, higher stiffnes.. |
|||
Vicat Softening Point | 91.0 °C | 196 °F | Rate B/50; ASTM D1525 |
SABIC Innovative Plastics Cycoloy® CX7010 PC+ABS Cycoloy* CX7010 resin is an injection moldable PC/ABS blend. It contains non-brominated and non-chlorinated flame retardant systems to meet UL-94 V0. Excellent flow combined with good balance of pro.. |
|||
Vicat Softening Point | 91.0 °C | 196 °F | Rate B/120; ISO 306 |
SABIC Innovative Plastics GELOY FXW710SK ASA General purpose injection molding ASA with Visual Fx sparkle effect. |
|||
Vicat Softening Point | 91.0 °C | 196 °F | ASTM D1525 |
NOVA Chemicals Novapol® LF-0219-A LDPE Blow Molding Resin Good heat sealing latitude, Easy processabilityApplications: Food contact, Squeeze bottles, Non-ESCRAdditives: Base resinInformation provided by NOVA Chemicals. |
|||
Vicat Softening Point | 91.0 °C | 196 °F | ASTM D1525 |
Petroquimica Triunfo Trithene® SX 7012 LDPE - Blow Molding The Trithene SX 7012 resin is a low density polyethylene (LDPE) with medium molecular weight which allows the production of flasks with an adequate combination of mechanical and impact strength, fle.. |
|||
Vicat Softening Point | 91.0 °C | 196 °F | ASTM D1525 |
Petroquimica Triunfo Trithene® TS 7010 LDPE - Medium Duty Packaging The Trithene TS 7010 resin is a low-density polyethylene (LDPE) with a high molecular weight, excellent processability, and good mechanical properties. The incorporated additives package warrants th.. |
|||
Vicat Softening Point | 91.0 °C | 196 °F | Rate B; ASTM D1525 |
Ineos Nova PS 2520 Crystal Polystyrene
(discontinued **) Information provided by Nova ChemicalsINEOS NOVA began October 1 2007 as an expansion of the 50:50 joint venture between NOVA Chemicals and INEOS to include North American assets. |
|||
Vicat Softening Point | 91.0 °C | 196 °F | DIN 53460 |
Ineos Nova S-6600 High Impact Compact Polystyrene
(discontinued **) High impact polystyrene which is very easy processed in extension and thermoforming processes. Typical applications are packaging of food stuffs like Yot beakers but technical parts and extruded pr.. |
|||
Vicat Softening Point | 91.0 °C | 196 °F | ASTM D1525 |
Huntsman PE2018 Injection Molding Polyethylene
(discontinued **) Homopolymer and FDA compliantFeatures: Good toughness and machinabilityApplications: Injection molding: closures and small items.FDA Notes: Conforms to FDA regulation 21 CFR 177.1520 (c)2.2 under co.. |
|||
Vicat Softening Point | 91.0 °C | 196 °F | ASTM D1525 |
Albis Plastics Cellulose Acetate Propionate CP808 (FDA), 17% Plasticizer
(discontinued **) Amorphous Cellulose Acetate Propionate (CAP)Characteristics: Strength, Hardness, Stiffness, Weatherability and Dimensional StabilityApplications: Brush Handles, Safety Glasses, Optical Products and .. |
|||
Vicat Softening Point | 91.0 °C | 196 °F | ASTM D1525 |
Albis Plastics Cellulose Acetate Propionate CP808 (FDA), 18% Plasticizer
(discontinued **) Amorphous Cellulose Acetate Propionate (CAP)Characteristics: Strength, Hardness, Stiffness, Weatherability and Dimensional StabilityApplications: Brush Handles, Safety Glasses, Optical Products and .. |
|||
Vicat Softening Point | 91.0 °C | 196 °F | ASTM D1525 |
LyondellBasell Petrothene® GA594189 Linear Low Density Polyethylene, Injection Molding Grade PETROTHENE GA594189 is a pelletized LLDPE copolymer resin for injection molding thin-walled items requiring high flow and short cycle times. GA594189 exhibits excellent flow, warp resistance and sur.. |
|||
Vicat Softening Point | 91.0 °C | 196 °F | VST/B/50; ISO 306 |
GEHR Plastics PP Polypropylene Polypropylene shows a high mechanical strength and a tensile strength, but a low notched impact strength. PP resists stress cracking and it is easy to weld. At minus temperatures it can get brittle... |
|||
Vicat Softening Point | 91.0 °C @Load 5.00 kg |
196 °F @Load 11.0 lb |
50°C/h; ASTM D1525 |
LG Chemical RX710 ABS, High Impact, Chemical Resistance to HCFC Feature: Injection Molding, Chemical Resistance to HCFC, High ImpactApplication: Refrigerator Dispensor & HomebarCAS No. 9003-56-9Information provided by LG Chemical |
|||
Vicat Softening Point | 91.0 °C | 196 °F | ASTM D1525 |
Micropol Microlin LL17 Linear Polyethylene Rotational Molding Powder Information provided by Micropol Limited |
|||
Vicat Softening Point | 91.0 °C | 196 °F | ASTM D1525-95 |
Multibase Multi-ABS 802 Natural Extrusion Grade Data provided by Multibase. |
|||
Vicat Softening Point | 91.0 °C | 196 °F | B/120; ISO R306 |
Samsung Cheil Industries Starex® VE-0852 ABS, Unreinforced FR Information provided by Samsung Cheil Industries. |
|||
Vicat Softening Point | 91.0 °C | 196 °F | Rate "B" Loading 1 (120 degC/h 10N); ASTM Test |
Styrolution Styrolux 3G33 SBC Styrolux 3G33 is a thermoplastic styrene-butadiene block copolymer which is suitable for injection molding, extrusion and thermoforming. It offers an outstanding combination of crystal clarity and .. |
|||
Vicat Softening Point | 91.0 °C | 196 °F | (50 °C/h / 50N) - B/50; ISO 306 |
Styrolution Terblend® N NM-13 ABS/PA6 (Dry) Terblend N NM-13 is a new experimental ABS/PA6-Blend with improved impact strength at low temperatures. It can be easily processed on any standard injection molding machine.Information provided by .. |
|||
Vicat Softening Point | 91.0 °C | 196 °F | B/50; ISO R306 |
Samsung Cheil Industries Starex® GC-0703 ABS/PET, Unreinforced Recycled Eco-friendly Post-Consumer recycled PET.Information provided by Samsung Cheil Industries. |
|||
Vicat Softening Point | 91.0 °C | 196 °F | B/50; ISO R306 |
Samsung Cheil Industries Starex® VE-0813 ABS, Unreinforced FR Information provided by Samsung Cheil Industries. |
|||
Vicat Softening Point | 91.0 °C @Load 1.02 kg, Temperature 120 °C |
196 °F @Load 2.25 lb, Temperature 248 °F |
ASTM D1525 |
Styrolution Styrolux® GH 62 SBC Description: Styrolux® GH 62 is a high flow thermoplastic styrene-butadiene block copolymer with excellent mold release properties. It has crystal clarity, good toughness, good stiffness and warp.. |
|||
Vicat Softening Point | 91.0 °C | 196 °F | |
Dow LDPE 722M Low Density Polyethylene DOW LDPE 722M resin is a broad molecular weight distribution homopolymer designed to offer good impact strength and stress crack resistance with excellent flexibility. Typical applications include c.. |
|||
Vicat Softening Point | 91.0 °C | 196 °F | 50°C/hr; 50N |
Arkema Group Appryl® HXN 1240 Polypropylene, 40% Talc Filled Compound of a PP homopolymer and 40% talc, warm stabilized suitable for under hood automotive applications.ISO data provided by the manufacturer, Arkema. |
|||
Vicat Softening Point | 91.0 °C | 196 °F | Rate B/50; ISO 306 |
SABIC Innovative Plastics NORYL PX2060 PPE+PS (Europe-Africa-Middle East) Noryl* PX2060 is an unfilled, injection moldable modified polyphenylene ether resin. Designed for good dimensional stability and high flow , this resin also uses non-chlorinated, non-brominated FR .. |