Thermal Properties | Metric | English | Comments |
---|---|---|---|
Minimum Service Temperature, Air | -80.0 °C | -112 °F | Recommended |
Nye Lubricants UniFlor 8901 (UF) Synthetic Oil Information provided by Nye Lubricants. |
|||
Minimum Service Temperature, Air | -80.0 °C | -112 °F | Recommended |
Nye Lubricants UniFlor 8960 (498A) (UF) Synthetic Oil Information provided by Nye Lubricants. |
|||
Minimum Service Temperature, Air | -80.0 °C | -112 °F | Recommended |
Nye Lubricants UniFlor 8961 (UF) Synthetic Oil Information provided by Nye Lubricants. |
|||
Minimum Service Temperature, Air | -80.0 °C | -112 °F | Recommended |
Nye Lubricants UniFlor 8961F (896-1) (UF) Synthetic Oil Information provided by Nye Lubricants. |
|||
Minimum Service Temperature, Air | -80.0 °C | -112 °F | Recommended |
Nye Lubricants UniFlor 8961R (UF) Synthetic Oil Information provided by Nye Lubricants. |
|||
Minimum Service Temperature, Air | -80.0 °C | -112 °F | |
Parker Chomerics CHO-BOND 1085 Conductive Adhesive CHO-BOND® adhesives are electrically conductive epoxy and silicone resins. Curing mechanisms are either room temperature, elevated temperature or moisture. Both single and two-component systems are.. |
|||
Minimum Service Temperature, Air | -80.0 °C | -112 °F | Use within 8 hours of application |
Parker Chomerics CHO-BOND® 1087 Primer Description: CHO-BOND® 1087 Primer is a low viscosity, blue liquid formulated to provide adhesion between silicone based compounds and non-silicone substrates such as metal, glass, plastic and cera.. |
|||
Minimum Service Temperature, Air | -80.0 °C | -112 °F | Continuous |
Lord Adhesives Circalokâ„¢ 6715 Silicone Encapsulant Circalokâ„¢ 6715 is a two component, medium viscosity, solvent-free silicone which cures at room temperature to an elastomeric, stress-free rubber of outstanding electrical and high temperature p.. |
|||
Minimum Service Temperature, Air | -80.0 °C | -112 °F | |
Saint-Gobain Meldin® 7001 Direct Formed Polyimide Finished parts and basic shapes made from unfilled polyimide material for structural applications requiring requiring high electrical insulative properties, high purity and low outgassing, and high .. |
|||
Minimum Service Temperature, Air | -80.0 °C | -112 °F | |
Dow Corning Q3-6575 DIELECTRIC GEL A/B KIT Two-part, clear, RT or heat cure and low temperature (-80°C/-112°F)stability.Information provided by Dow Corning |
|||
Minimum Service Temperature, Air | -80.0 °C | -112 °F | |
Dow Corning SE 1885 KIT Two-part, clear, 1:1, addition cure, low temperature cure, low temperature capable, low viscosity.Information provided by Dow Corning |
|||
Minimum Service Temperature, Air | -80.0 °C | -112 °F | |
Dow Corning X3-6211 ENCAPSULANT One-part, clear, UV cure.Information provided by Dow Corning |
|||
Minimum Service Temperature, Air | -80.0 °C | -112 °F | |
Cymat A35620SC 020SS Stabilized Aluminum Foam Description: Cymat A35620SC 020SS stabilized aluminum foam (SAF) is a closed cell aluminum foam formed from A356 aluminum alloy with a density of 0.2 g/cm3. The mechanical properties of SAF make it .. |
|||
Minimum Service Temperature, Air | -80.0 °C | -112 °F | |
Cymat A35620SC 030SS Stabilized Aluminum Foam Description: Cymat A35620SC 030SS stabilized aluminum foam (SAF) is a closed cell aluminum foam formed from A356 aluminum alloy with a density of 0.3 g/cm3. The mechanical properties of SAF make it .. |
|||
Minimum Service Temperature, Air | -80.0 °C | -112 °F | |
Cymat A35620SC 040SS Stabilized Aluminum Foam Description: Cymat A35620SC 040SS stabilized aluminum foam (SAF) is a closed cell aluminum foam formed from A356 aluminum alloy with a density of 0.4 g/cm3. The mechanical properties of SAF make it .. |
|||
Minimum Service Temperature, Air | -80.0 °C | -112 °F | |
Dow Corning 3-6371 UV GEL One-part, translucent amber, UV cure with moisture secondary cure (for shadow areas).Information provided by Dow Corning |
|||
Minimum Service Temperature, Air | -80.0 °C | -112 °F | |
Dow Corning 3-6635 DIELECTRIC GEL One-part, heat cure, with low temperature (-80°C/-112°F) stability.Information provided by Dow Corning |
|||
Minimum Service Temperature, Air | -80.0 °C | -112 °F | DSC |
Adamas Adalon® 103 PTFE, 10% Carbon Filled Information provided by Adamas, HPM |
|||
Minimum Service Temperature, Air | -80.0 °C | -112 °F | DSC |
Adamas Adalon® 118 PTFE, 23/2% Carbon/Graphite Filled Information provided by Adamas, HPM |
|||
Minimum Service Temperature, Air | -80.0 °C | -112 °F | DSC |
Adamas Adalon® 125 PTFE, 35% Carbon Filled Information provided by Adamas, HPM |
|||
Minimum Service Temperature, Air | -80.0 °C | -112 °F | DSC |
Adamas Adalon® 139 PTFE, 35% Soft Carbon Filled Information provided by Adamas, HPM |
|||
Minimum Service Temperature, Air | -80.0 °C | -112 °F | DSC |
Adamas Adalon® 466 PTFE, Mineral/Organic Filler Information provided by Adamas, HPM |
|||
Minimum Service Temperature, Air | -80.0 °C | -112 °F | DSC |
Adamas Adalon® 991 PTFE Information provided by Adamas, HPM |
|||
Minimum Service Temperature, Air | -80.0 °C | -112 °F | DSC |
Adamas Adalon® 998 PTFE, Turquoise Information provided by Adamas, HPM |
|||
Minimum Service Temperature, Air | -80.0 °C | -112 °F | DSC |
Adamas Rixon 130 PEEK, 30% Carbon Filled Information provided by Adamas, HPM |
|||
Minimum Service Temperature, Air | -80.0 °C | -112 °F | DSC |
Adamas Rixon 430 PEEK, 30% Carbon Fiber Information provided by Adamas, HPM |
|||
Minimum Service Temperature, Air | -80.0 °C | -112 °F | DSC |
Adamas Adalon® 503 PTFE, 0.1% MoS2 Information provided by Adamas, HPM |
|||
Minimum Service Temperature, Air | -80.0 °C | -112 °F | |
Parker Chomerics CHO-SHIELD® 1086 Silicone Adhesive Primer Air-drying liquid coatings used to improve the adhesion of Chomerics CHO-BOND conductive silicone elastomers to metal and other non-silicone substrates. The primers are moisture reactive and clear i.. |
|||
Minimum Service Temperature, Air | -80.0 °C | -112 °F | DSC |
Adamas Adalon® 131 PTFE, 25% Soft Carbon Filled Information provided by Adamas, HPM |
|||
Minimum Service Temperature, Air | -80.0 °C | -112 °F | DSC |
Adamas Adalon® 305 PTFE, 15% Graphite Information provided by Adamas, HPM |