Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

Polymer Property : CTE, linear, Transverse to Flow = 55.0 µm/m-°C Product List

Thermal Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.
Thermal Properties Metric English Comments
CTE, linear, Transverse to Flow 55.0 µm/m-°C
30.6 µin/in-°F
Average below Tg, Result based on 450G; ISO 11359
Victrex® PEEK 600G Polyetheretherketone  (discontinued **)
Product Description: High performance thermoplastic material, unreinforced PolyEtherEtherKetone (PEEK), semi crystalline, granules for injection moulding and extrusion, low viscosity, FDA food conta..
CTE, linear, Transverse to Flow 55.0 - 74.0 µm/m-°C
30.6 - 41.1 µin/in-°F
Average value: 63.4 µm/m-°C Grade Count:13
Overview of materials for Polycarbonate, 10% Glass Filled
This property data is a summary of similar materials in the MatWeb database for the category "Polycarbonate, 10% Glass Filled". Specific grades with glass content between 5% and 14% are included. Ea..
CTE, linear, Transverse to Flow 55.0 - 55.0 µm/m-°C

@Temperature 200 - 200 °C
30.6 - 30.6 µin/in-°F

@Temperature 392 - 392 °F
Average value: 55.0 µm/m-°C Grade Count:1
Overview of materials for Thermoplastic Polyimide, Unfilled
CTE, linear, Transverse to Flow 55.0 µm/m-°C

@Temperature 23.0 - 60.0 °C
30.6 µin/in-°F

@Temperature 73.4 - 140 °F
ISO 11359-2
SABIC Innovative Plastics LNP LUBRICOMP OCL36 PPS - Linear (Europe-Africa-Middle East)
LNP* Lubricomp* OCL4036L is a compound based on PPS - Linear resin containing PTFE, Carbon Fiber. Added features of this material include: Electrically Conductive.
CTE, linear, Transverse to Flow 55.0 µm/m-°C

@Temperature 23.0 - 60.0 °C
30.6 µin/in-°F

@Temperature 73.4 - 140 °F
ISO 11359-2
SABIC Innovative Plastics LNP LUBRICOMP OCL36XXP PPS - Linear (Europe-Africa-Middle East)
LNP* LUBRICOMP* OCL36XXP is a compound based on PPS- Linear resin containing PTFE, Carbon Fiber. Added features include : Internally Lubricated, Electrically Conductive .
CTE, linear, Transverse to Flow 55.0 µm/m-°C

@Temperature -40.0 - 40.0 °C
30.6 µin/in-°F

@Temperature -40.0 - 104 °F
ISO 11359-2
SABIC Innovative Plastics LNP LUBRICOMP RFL36S PA 66
LNP* LUBRICOMP* RFL36S is a compound based on Nylon 66 resin containing 30% Glass Fiber, 15% PTFE. Added features of this material include: Wear Resistant, Heat Stabilized.
CTE, linear, Transverse to Flow 55.0 µm/m-°C

@Temperature -40.0 - 40.0 °C
30.6 µin/in-°F

@Temperature -40.0 - 104 °F
ISO 11359-2
SABIC Innovative Plastics LNP LUBRICOMP RFL36XXZ PA 66
LNP* LUBRICOMP* RFL36XXZ is a compound based on Nylon 66 resin containing 30% Glass Fiber, 15% PTFE. Added feature of this material is: Wear Resistant.
CTE, linear, Transverse to Flow 55.0 µm/m-°C

@Temperature -30.0 - 30.0 °C
30.6 µin/in-°F

@Temperature -22.0 - 86.0 °F
ASTM D 696
SABIC Innovative Plastics LNP Thermocomp GF003 PSU
LNP THERMOCOMP* GF003 is a compound based on Polysulfone resin containing Glass Fiber.This data was supplied by SABIC-IP for the Americas region.
CTE, linear, Transverse to Flow 55.0 µm/m-°C

@Temperature 23.0 - 60.0 °C
30.6 µin/in-°F

@Temperature 73.4 - 140 °F
ISO 11359-2
SABIC Innovative Plastics LNP THERMOCOMP JF004E PES (Europe-Africa-Middle East)
LNP* Thermocomp* JF004E is a compound based on Polyethersulfone resin containing Glass Fiber. Added features of this material include: Easy Molding.
CTE, linear, Transverse to Flow 55.0 µm/m-°C

@Temperature 23.0 - 60.0 °C
30.6 µin/in-°F

@Temperature 73.4 - 140 °F
ISO 11359-2
SABIC Innovative Plastics LNP THERMOCOMP JX97000 PES (Europe-Africa-Middle East)
LNP* Thermocomp* JX97000 is a compound based on Polyethersulfone resin containing Glass Fiber. Added features of this material include: Mold Release.
CTE, linear, Transverse to Flow 55.0 µm/m-°C

@Temperature -30.0 - 30.0 °C
30.6 µin/in-°F

@Temperature -22.0 - 86.0 °F
ASTM D696
SABIC Innovative Plastics LNP THERMOCOMP QC006 PA6.10
LNP THERMOCOMP* QC006 is a compound based on Nylon 6/10 resin containing 30% Carbon Fiber. Added features of this material include: Electrically Conductive.
CTE, linear, Transverse to Flow 55.0 µm/m-°C

@Temperature 23.0 - 150 °C
30.6 µin/in-°F

@Temperature 73.4 - 302 °F
ISO 11359-2
SABIC Innovative Plastics ULTEM 9076 PEI (Europe-Africa-Middle East)
Standard flow Polyetherimide Blend. Meets FAR 25.853 and OSU 65/65 with low toxicity, smoke, and flame evolution.
CTE, linear, Transverse to Flow 55.0 µm/m-°C

@Temperature -30.0 - 30.0 °C
30.6 µin/in-°F

@Temperature -22.0 - 86.0 °F
ASTM D696
SABIC Innovative Plastics LNP THERMOCOMP 9X11428J PPS
LNP* THERMOCOMP* 9X11428J is a compound based on Polyphenylsulfone containing Proprietary Fillers. Added features of this material include: Healthcare, Low Extractable.
CTE, linear, Transverse to Flow 55.0 µm/m-°C

@Temperature 23.0 - 60.0 °C
30.6 µin/in-°F

@Temperature 73.4 - 140 °F
ISO 11359-2
SABIC Innovative Plastics LNP Thermocomp OC004 PPS - Linear (Europe-Africa-Middle East)
LNP* THERMOCOMP* OC004 is a compound based on PPS-Linear resin containing Carbon Fiber. Added features include : Electrically Conductive.This data was supplied by SABIC-IP for the Europe-Africa-Midd..
CTE, linear, Transverse to Flow 55.0 µm/m-°C

@Temperature 23.0 - 60.0 °C
30.6 µin/in-°F

@Temperature 73.4 - 140 °F
ISO 11359-2
SABIC Innovative Plastics LNP VERTON RV00AESC PA 66 (Europe-Africa-Middle East)
LNP* VERTON* RV00AESC is a compound based on PA 66 resin containing Long Glass Fiber. Added features include; Easy Molding, Heat Stabilized.
CTE, linear, Transverse to Flow 55.0 - 65.0 µm/m-°C

@Temperature 20.0 °C
30.6 - 36.1 µin/in-°F

@Temperature 68.0 °F
TMA
Vyncolit 4451 XB Novolac Phenolic
Organic and mineral filled phenolic molding compound with excellent mechanical properties (highest notched impact strength).USES: Fuse holders, brush holders, circuit breakers, automotive ignition a..
CTE, linear, Transverse to Flow 55.0 µm/m-°C
30.6 µin/in-°F
dry; ISO 11359-1/-2
DSM Stanyl® TS250FK33 PA46-(GF+MF)30 FR
30% Glass/Mineral Reinforced, Flame Retardant, Low Warpage
CTE, linear, Transverse to Flow 55.0 µm/m-°C
30.6 µin/in-°F
ISO 11359-1/-2
EMS-Grivory Grivory® HT2V-5H PA6T/66-GF50
Product description: Grivory HT2V-5H is a 50 % glass fiber reinforced engineering thermoplastic material based on a semi-crystalline, partially aromatic copolyamide. Polymer designation acc. to ISO:..
CTE, linear, Transverse to Flow 55.0 µm/m-°C
30.6 µin/in-°F
ISO 11359-1/-2
EMS-Grivory Grivory® XE 4120 black 9916 PA*-GF30
Product description: Grivory XE 4120 black 9916 is a 30% glass fiber reinforced flame retardant (UL 94 V-0) engineering thermoplastic material based on a semi-crystalline, partially aromatic copolya..
CTE, linear, Transverse to Flow 55.0 µm/m-°C

@Temperature -40.0 - 23.0 °C
30.6 µin/in-°F

@Temperature -40.0 - 73.4 °F
DAM; ISO 11359-1/-2
DuPont Performance Polymers Zytel® HTN 51G35HSLR BK420 Polyphthalamide (PPA)  (Unverified Data**)
35% Glass Reinforced PPA High Performance Polyamide Zytel HTN51G35HSLR BK420 is a 35% glass reinforced heat stabilized lubricated high performance polyamide resin with improved hydrolysis resistance..
CTE, linear, Transverse to Flow 55.0 µm/m-°C

@Temperature 23.0 - 60.0 °C
30.6 µin/in-°F

@Temperature 73.4 - 140 °F
ISO 11359-2
Eurostar Starglas OC004 PPS, 20% Carbon Filled, Injection Molded
Starglas OC004 is a 20% Carbon Fiber Reinforced PPS Injection Molding ResinInformation provided by Eurostar.
CTE, linear, Transverse to Flow 55.0 µm/m-°C
30.6 µin/in-°F
ISO 11359-1/-2
Covestro Makrolon® DP1-1887* Polycarbonate, 10% Glass Filled
ISO 7391-PC,MR,(,,)-18-9,GF10Developmental productMVR (300 °C/1.2 kg) 16 cm3/10 min10 % Glass fiber reinforcedMilled fiberLow viscosityEasy releasegood surface qualityInjection molding - Melt tempe..
CTE, linear, Transverse to Flow 55.0 µm/m-°C
30.6 µin/in-°F
ISO 11359-1/-2
Covestro Makrolon® DP1-1888* Polycarbonate, 20% Glass Filled
ISO 7391-PC,MR,(,,)-09-3,GF20Developmental productMVR (300 °C/1.2 kg) 10 cm3/10 min20 % Glass fiber reinforcedMilled fiberMedium viscosityEasy releasegood surface qualityInjection molding - Melt te..
CTE, linear, Transverse to Flow 55.0 µm/m-°C

@Temperature 23.0 - 80.0 °C
30.6 µin/in-°F

@Temperature 73.4 - 176 °F
ISO 11359-1/2
Akro-Plastic Akroloy® PA GF 60 (2844) PA 6.6 & PA6I/6T Dry, 60% Glass Filled
One of the most characteristic properties of polyamide (PA 6.6) is the absorption of moisture. This essentially leads to increased toughness and elongation at break, to name the most important param..
CTE, linear, Transverse to Flow 55.0 - 70.0 µm/m-°C

@Temperature 23.0 - 80.0 °C
30.6 - 38.9 µin/in-°F

@Temperature 73.4 - 176 °F
ISO 11359-1/-2
BASF Ultramid® B3G8 BK00564 40% Glass Filled PA6 (Dry)
Ultramid B3G8 BK00564 is a 40% glass filled, pigmented black, injection molding PA6 grade.
CTE, linear, Transverse to Flow 55.0 µm/m-°C
30.6 µin/in-°F
z, below Tg; IPC TM-650 2.4.24
Arlon 45N Multifunctional Epoxy Laminate and Prepreg
Arlon 45N is a tough, high Tg (175°C by DSC) multifunctional epoxy laminate and prepreg system designed for use in a variety of higher layer count MLBs. Processable using conventional FR-4 conditi..
CTE, linear, Transverse to Flow 55.0 µm/m-°C
30.6 µin/in-°F
z, below Tg; IPC TM-650 2.4.24
Arlon 44N Multifunctional Microdispersed Ceramic Filled Epoxy-Fiberglass Prepreg
Arlon 44N is a high resin content multifunctional (175°C) epoxy prepreg system with a proprietary microdispersed ceramic filler system. 44N is engineered for the filling of clearance holes in thi..
CTE, linear, Transverse to Flow 55.0 µm/m-°C

@Temperature -30.0 - 30.0 °C
30.6 µin/in-°F

@Temperature -22.0 - 86.0 °F
ASTM D696
SABIC Innovative Plastics LNP THERMOCOMP DX07408 PC
LNP* THERMOCOMP* DX07408 is a compound based on Polycarbonate containing Proprietary Filler(s). Added feature of this grade is: UL Rated.
CTE, linear, Transverse to Flow 55.0 µm/m-°C

@Temperature 23.0 - 60.0 °C
30.6 µin/in-°F

@Temperature 73.4 - 140 °F
ISO 11359-2
SABIC Innovative Plastics LNP THERMOCOMP JF002R PES (Europe-Africa-Middle East)
LNP* Thermocomp* JF002R is a compound based on Polyethersulfone resin containing Glass Fiber, Glass Bead. Added features of this material include: Mold Release.
Copyright © lookpolymers.com All Rights Reserved