Thermal Properties | Metric | English | Comments |
---|---|---|---|
CTE, linear | 14.0 µm/m-°C @Temperature -55.0 - 288 °C |
7.78 µin/in-°F @Temperature -67.0 - 550 °F |
X-Direction; IPC-TM-650 2.4.41 |
Rogers Corporation RO4350B Glass-Reinforced Hydrocarbon and Ceramic Laminate with Thin Film Resistor Foil RO4000® Series High Frequency Circuit Materials are glass-reinforced hydrocarbon and ceramic (not PTFE) laminates with TICER™ TCR® Thin Film Resistor Foils. These laminates are designed for perf.. |
|||
CTE, linear | 14.0 µm/m-°C @Temperature -55.0 - 288 °C |
7.78 µin/in-°F @Temperature -67.0 - 550 °F |
X-Direction; ASTM D3386-94 |
Rogers Corporation RO4535 Ceramic-Filled, Glass-Reinforced Hydrocarbon Laminate The RO4500™ Series Cost Performance Antenna Grade Laminates are ceramic-filled, glass-reinforced hydrocarbon based materials that provides the controlled dielectric constant, low loss performance a.. |
|||
CTE, linear | 14.0 µm/m-°C @Temperature 1000 °C |
7.78 µin/in-°F @Temperature 1830 °F |
|
Outokumpu 4762 High Temperature Ferritic Stainless Steel Highest chromium content-most resistant to reducing sulphurous gases. Susceptible to 475°C embrittlement and s-phase forms during long exposures in the range 600-800°C.Applications: Mostly used i.. |
|||
CTE, linear | 14.0 µm/m-°C @Temperature 100 - 200 °C |
7.78 µin/in-°F @Temperature 212 - 392 °F |
Axial; ASTM E831 |
Solvay Specialty Polymers Ryton® R-4-220BL Polyphenylene Sulfide Compound
(Unverified Data**) Black Polyphenylene Sulfide CompoundRyton® R-4-220BL is an advanced 40% fiberglass reinforced polyphenylene sulfide compound formulated for enhanced hydrolytic stability in applications requiring .. |
|||
CTE, linear | 14.0 µm/m-°C @Temperature 900 °C |
7.78 µin/in-°F @Temperature 1650 °F |
|
MarkeTech Repton 914 Magnesia MgO REPTON setter tiles, kiln furniture, and special fixtures are lightweight, ridge, and high strength ceramics that resist distortion and spalling, even when thermal cycled many times. They are availa.. |
|||
CTE, linear | 14.0 µm/m-°C @Temperature 25.0 - 500 °C |
7.78 µin/in-°F @Temperature 77.0 - 932 °F |
|
Haynes 230® alloy, 10% cold reduction, 1121°C anneal for 5 minutes Excellent high-temperature strength, outstanding resistance to oxidizing environments up to 1149°C, premier resistance to nitriding environments, and excellent long-term thermal stability. Applic.. |
|||
CTE, linear | 14.0 µm/m-°C @Temperature 25.0 - 500 °C |
7.78 µin/in-°F @Temperature 77.0 - 932 °F |
|
Haynes 230® alloy, 30% cold reduction, 1121°C anneal for 5 minutes Excellent high-temperature strength, outstanding resistance to oxidizing environments up to 1149°C, premier resistance to nitriding environments, and excellent long-term thermal stability. Applic.. |
|||
CTE, linear | 14.0 µm/m-°C @Temperature 25.0 - 500 °C |
7.78 µin/in-°F @Temperature 77.0 - 932 °F |
|
Haynes 230® alloy, 40% cold reduction, 1121°C anneal for 5 minutes Excellent high-temperature strength, outstanding resistance to oxidizing environments up to 1149°C, premier resistance to nitriding environments, and excellent long-term thermal stability. Applic.. |
|||
CTE, linear | 14.0 µm/m-°C @Temperature 25.0 - 500 °C |
7.78 µin/in-°F @Temperature 77.0 - 932 °F |
|
Haynes 230® alloy, plate, 4000 hours exposure at 760°C (1400°F) Excellent high-temperature strength, outstanding resistance to oxidizing environments up to 1149°C, premier resistance to nitriding environments, and excellent long-term thermal stability. Applic.. |
|||
CTE, linear | 14.0 µm/m-°C @Temperature 25.0 - 315 °C |
7.78 µin/in-°F @Temperature 77.0 - 599 °F |
|
Haynes HR-160® alloy, plate, aged 4000 hours at 760°C (1400°F) Outstanding resistance to various forms of high-temperature corrosion attack, excellent resistance to sulfidation and chloride attack in both reducing and oxidizing atmospheres. Excellent forming an.. |
|||
CTE, linear | 14.0 µm/m-°C @Temperature 25.0 - 315 °C |
7.78 µin/in-°F @Temperature 77.0 - 599 °F |
|
Haynes HR-160® alloy, plate, aged 4000 hours at 871°C (1600°F) Outstanding resistance to various forms of high-temperature corrosion attack, excellent resistance to sulfidation and chloride attack in both reducing and oxidizing atmospheres. Excellent forming an.. |
|||
CTE, linear | 14.0 µm/m-°C @Temperature 25.0 - 315 °C |
7.78 µin/in-°F @Temperature 77.0 - 599 °F |
|
Haynes HR-160® alloy, solution annealed sheet Outstanding resistance to various forms of high-temperature corrosion attack, excellent resistance to sulfidation and chloride attack in both reducing and oxidizing atmospheres. Excellent forming an.. |
|||
CTE, linear | 14.0 µm/m-°C @Temperature 93.0 - 649 °C |
7.78 µin/in-°F @Temperature 199 - 1200 °F |
|
Latrobe LSSâ„¢ A2 Tool Steel (ASTM A2) TLS A2 tool steel is a versatile, air-hardening tool steel that is characterized by good toughness and excellent dimensional stability in heat treatment. TLS A2 is intermediate in wear resistance be.. |
|||
CTE, linear | 14.0 µm/m-°C @Temperature 25.0 - 500 °C |
7.78 µin/in-°F @Temperature 77.0 - 932 °F |
|
Haynes 230® alloy, plate, 8000 hours exposure at 760°C (1400°F) Excellent high-temperature strength, outstanding resistance to oxidizing environments up to 1149°C, premier resistance to nitriding environments, and excellent long-term thermal stability. Applic.. |
|||
CTE, linear | 14.0 µm/m-°C @Temperature 25.0 - 800 °C |
7.78 µin/in-°F @Temperature 77.0 - 1470 °F |
|
Haynes 242® alloy Age-hardenable, high ductility in the aged condition, lower thermal expansion than most alloys, very good oxidation resistance up to 815°C, excellent low cycle fatigue properties, very good therm.. |
|||
CTE, linear | 14.0 µm/m-°C @Temperature 25.0 - 800 °C |
7.78 µin/in-°F @Temperature 77.0 - 1470 °F |
|
Haynes 242® alloy, cold reduced sheet, annealed and aged Age-hardenable, high ductility in the aged condition, lower thermal expansion than most alloys, very good oxidation resistance up to 815°C, excellent low cycle fatigue properties, very good therm.. |
|||
CTE, linear | 14.0 µm/m-°C @Temperature 25.0 - 800 °C |
7.78 µin/in-°F @Temperature 77.0 - 1470 °F |
|
Haynes 242® alloy, cold reduced sheet, annealed, 40% cold work, aged Age-hardenable, high ductility in the aged condition, lower thermal expansion than most alloys, very good oxidation resistance up to 815°C, excellent low cycle fatigue properties, very good therm.. |
|||
CTE, linear | 14.0 µm/m-°C @Temperature 25.0 - 700 °C |
7.78 µin/in-°F @Temperature 77.0 - 1290 °F |
|
Haynes Hastelloy® C-2000® alloy, flat products Nickel-chromium-molybdenum (Ni-Cr-Mo) C-type alloys have a long history of use in the Chemical Process Industries and are known for their versatility. Not only do they resist all acids (especially h.. |
|||
CTE, linear | 14.0 µm/m-°C @Temperature 21.0 - 300 °C |
7.78 µin/in-°F @Temperature 69.8 - 572 °F |
Mean |
Special Metals DURANICKEL® 301 (UNS N03301) Annealed and Aged Rod and Bar Tensile strength (ultimate and yield), compressive strength, hardness, and elongation values reported here are typical for Annealed and Aged Rod and Bar specifically. Other property values are typic.. |
|||
CTE, linear | 14.0 µm/m-°C @Temperature 21.0 - 300 °C |
7.78 µin/in-°F @Temperature 69.8 - 572 °F |
Mean |
Special Metals DURANICKEL® 301 (UNS N03301) Hot-Finished and Aged Rod and Bar Tensile strength (ultimate and yield), hardness, and elongation values reported here are typical for Hot-Finished and Aged Rod and Bar specifically. Other property values are typical of aged DURANIC.. |
|||
CTE, linear | 14.0 µm/m-°C @Temperature 21.0 - 300 °C |
7.78 µin/in-°F @Temperature 69.8 - 572 °F |
Mean; aged |
Special Metals DURANICKEL® 301 (UNS N03301) Spring Wire Tensile strength (ultimate) and elongation values reported here are typical for Spring Wire specifically. Other property values are typical of annealed DURANICKEL® alloy 301 or the alloy in gener.. |
|||
CTE, linear | 14.0 µm/m-°C @Temperature 25.0 - 500 °C |
7.78 µin/in-°F @Temperature 77.0 - 932 °F |
|
Carpenter Custom Age 625 PLUS® Nickel-Base Alloy, Double Aged 732°C (1350°F)/8hr/AC to 621°C (1150°F)/8hr/AC Data provided by Carpenter Technology Corporation.Custom Age 625 PLUS® alloy is a precipitation hardenable, nickel-base alloy which, in many environments, displays corrosion resistance similar to t.. |
|||
CTE, linear | 14.0 µm/m-°C @Temperature 20.0 - 1093 °C |
7.78 µin/in-°F @Temperature 68.0 - 1999 °F |
|
ATI Allegheny Ludlum AL 453™ Stainless Steel Single phase iron-chromium ferritic stainless steel alloy. Should be annealed between 1450 and 1600°F and quickly cooled. Information provided by Allegheny Ludlum |
|||
CTE, linear | 14.0 µm/m-°C @Temperature 25.0 - 500 °C |
7.78 µin/in-°F @Temperature 77.0 - 932 °F |
|
Carpenter Custom Age 625 PLUS® Nickel-Base Alloy, Aged 732°C (1350°F)/4hr/AC Data provided by Carpenter Technology Corporation.Custom Age 625 PLUS® alloy is a precipitation hardenable, nickel-base alloy which, in many environments, displays corrosion resistance similar to t.. |
|||
CTE, linear | 14.0 µm/m-°C @Temperature 25.0 - 500 °C |
7.78 µin/in-°F @Temperature 77.0 - 932 °F |
|
Haynes 230® alloy, GMAW deposit weld metal Excellent high-temperature strength, outstanding resistance to oxidizing environments up to 1149°C, premier resistance to nitriding environments, and excellent long-term thermal stability. Applicat.. |
|||
CTE, linear | 14.0 µm/m-°C @Temperature 25.0 - 500 °C |
7.78 µin/in-°F @Temperature 77.0 - 932 °F |
|
Haynes 230® alloy, 50% cold reduction, 1121°C anneal for 5 minutes Excellent high-temperature strength, outstanding resistance to oxidizing environments up to 1149°C, premier resistance to nitriding environments, and excellent long-term thermal stability. Applicat.. |