Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

Polymer Property : Deflection Temperature at 1.8 MPa (264 psi) = 68.0 °C Product List

Thermal Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.
Thermal Properties Metric English Comments
Deflection Temperature at 1.8 MPa (264 psi) 68.0 °C
154 °F
Plastcom SLOVAMID 66 FRC 3 PA 66 basic type with flame retardant
Features: Modified for general use, with excellent manufacturing properties, characterized by high strength and toughness also at minus temperatures. Used in automotive, electrical, engineering and ..
Deflection Temperature at 1.8 MPa (264 psi) 68.0 °C
154 °F
ASTM D648
Nylene® 401, Nylon 6
Injection molding grade. Dry As Molded. Nylene 401 is recommended for general purpose nylon molding applications in both thin and heavy sections. Nylene 401 has high flow characteristics at minima..
Deflection Temperature at 1.8 MPa (264 psi) 68.0 °C
154 °F
ASTM D648
Nylene® 401, Nylon 6, at 50% Relative Humidity
Injection molding grade. Nylene 401 is recommended for general purpose nylon molding applications in both thin and heavy sections. Nylene 401 has high flow characteristics at minimal processing temp..
Deflection Temperature at 1.8 MPa (264 psi) 68.0 °C
154 °F
ASTM D648
Nylene® 401D, Nylon 6
Injection molding grade. Dry as molded. Nylene 401D is a specially formulated nylon 6 molding resin possessing outstanding flow characteristics. Nylene 401D is ideally suited for applications requi..
Deflection Temperature at 1.8 MPa (264 psi) 68.0 °C
154 °F
120°C/h; ISO 75/1
Polykemi AB POLYfill PPH T20020 Polypropylene Homopolymer, Mineral Reinforced
Information provided by Polykemi AB
Deflection Temperature at 1.8 MPa (264 psi) 68.0 - 81.0 °C
154 - 178 °F
Average value: 74.7 °C Grade Count:3
Overview of materials for Polystyrene, Wood Filled
This property data is a summary of similar materials in the MatWeb database for the category "Polystyrene, Wood Filled". Each property range of values reported is minimum and maximum values of appro..
Deflection Temperature at 1.8 MPa (264 psi) 68.0 °C
154 °F
120°C/h; ISO 75/1
Polykemi AB POLYfill PPH T15020 H4 Polypropylene Homopolymer, Mineral Reinforced
Information provided by Polykemi AB
Deflection Temperature at 1.8 MPa (264 psi) 68.0 °C
154 °F
120°C/h; ISO 75/1
Polykemi AB POLYfill PPH T20020 UV Polypropylene Homopolymer, Mineral Reinforced, UV-Stabilized
Information provided by Polykemi AB
Deflection Temperature at 1.8 MPa (264 psi) 68.0 °C
154 °F
Unannealed; ASTM Data
Americas Styrenics Styron® 6010 High Impact Polystyrene  (discontinued **)
STYRON® 6010 resin is a high impact polystyrene grade with a proprietary ignition resistance additive package to achieve a UL 94 V-0 rating. It offers high heat resistance, high modulus, good impac..
Deflection Temperature at 1.8 MPa (264 psi) 68.0 °C
154 °F
ASTM D648
Albis Plastics Cellulose Acetate CA700 , Unreinforced, 29% Plasticizer  (discontinued **)
Amorphous Cellulose Acetate (CA)Characteristics: Chemical Resistance, Toughness, Strength, Hardness, Gloss, Clarity and "Feel"Applications: Tool Handles, Optical Products, Toys and Sheet ProductsPro..
Deflection Temperature at 1.8 MPa (264 psi) 68.0 °C

@Thickness 3.20 mm
154 °F

@Thickness 0.126 in
unannealed; ASTM D648
SABIC Innovative Plastics Valox® 364 PBT+PC
Designed for outdoor telecommunications enclosure applications.
Deflection Temperature at 1.8 MPa (264 psi) 68.0 °C

@Thickness 3.20 mm
154 °F

@Thickness 0.126 in
unannealed; ASTM D648
SABIC Innovative Plastics LNP THERMOCOMP RB008 PA 66 (Asia Pacific)
LNP THERMOCOMP* RB008 is a compound based on Nylon 66 resin containing Glass Bead.
Deflection Temperature at 1.8 MPa (264 psi) 68.0 °C
154 °F
ASTM D648
A. Schulman POLYFORT™ FPP 1453 Calcium Carbonate Filled Homopolymer Polypropylene
DescriptionPolyfort® FPP 1453 is a long term heat aging grade of 40% calcium carbonate filled homopolymer polypropylene. Information provided by A. Schulman.
Deflection Temperature at 1.8 MPa (264 psi) 68.0 °C
154 °F
ISO 75-1, 2
Polyplastics TOPAS® 8007 Cyclic Olefin Copolymer (COC) (Asia/Pacific Grade)
Water adsorption is small and barrier properties are good, making this grade particularly suitable for package applications for products that dislike moisture. Grade 8007 has lower coefficient of el..
Deflection Temperature at 1.8 MPa (264 psi) 68.0 °C
154 °F
ISO 75
Wellman Wellamid® 22L-N Unfilled Nylon 66, Lubricated
Typical Applications: Automotive components, gears, switches, bearings, pulleys, fasteners, electrical coil forms, chain-saw hand guards, cable ties, furniture hardware, small appliance housings, ae..
Deflection Temperature at 1.8 MPa (264 psi) 68.0 °C
154 °F
ASTM D648
A. Schulman POLYFORT™ FPP 1453 Calcium Carbonate Filled Homopolymer Polypropylene
DescriptionPolyfort® FPP 1453 is a long term heat aging grade of 40% calcium carbonate filled homopolymer polypropylene. Information provided by A. Schulman.
Deflection Temperature at 1.8 MPa (264 psi) 68.0 °C
154 °F
unannealed; ISO 75-2A
Total Polystyrene Impact 6540 Easy Flow Impact Polystyrene
POLYSTYRENE IMPACT 6540 is an easy flowing, high impact polystyrene with a good balance of mechanical and thermal properties. This resin combines physical properties such as the flow necessary for ..
Deflection Temperature at 1.8 MPa (264 psi) 68.0 °C
154 °F
Absolute Drying; ASTM-D648
Toyobo GLAMIDE® T-656E Nylon-66
GLAMIDE® is very tough and exhibits high abrasion resistance. It has a high melting point and heat resistance, has well-balanced proportions of mechanical properties, performs self-distinguishing a..
Deflection Temperature at 1.8 MPa (264 psi) 68.0 °C
154 °F
ASTM D648
Eastman TiGlaze SV Copolyester
TiGLAZE SV copolyester is a specialty copolyester for the architectural glazing industry, designed to provide a unique balance of toughness, stiffness and material value. The material has a CC1 Ligh..
Deflection Temperature at 1.8 MPa (264 psi) 68.0 °C
154 °F
Flatw 80x10x4, sp=64 mm; ISO 75/Af
Eurostar Starflam M10004A PP, Flame Retardant, Injection Molding
Starflam M10004A is an Unfilled Halogen Free Flame Retardant PP injection Molding ResinInformation provided by Eurostar.
Deflection Temperature at 1.8 MPa (264 psi) 68.0 °C
154 °F
Arkema Group Rilsan® AUM 50 NOIR T6LD Nylon 12, 50% Glass Bead Filled (Conditioned)
Designation ISO 1874-PA12,MHLR,16-020,GB50Rigid grad with glass beads filler (50%) for injection molding. Available color: black. Reinforced light and heat stabilizing agents. Mold-release agent.Goo..
Deflection Temperature at 1.8 MPa (264 psi) 68.0 °C
154 °F
BASF Polystyrol® 455 F WU Impact Grade Polystyrene (Europe)
Very easy-flowing, impact-modified grade.Data was collected by ISO methods and provided by BASF.
Deflection Temperature at 1.8 MPa (264 psi) 68.0 °C
154 °F
ASTM D648
Ashley Polymers Ashlene® 829L Nylon 6
Basic Nylon 6, low viscosity, lubricated.Data provided by the manufacturer
Deflection Temperature at 1.8 MPa (264 psi) 68.0 °C
154 °F
ASTM D648
Ashley Polymers Ashlene® 829LF Nylon 6
Basic Nylon 6, low viscosity, lubricated. This is FDA approved.Data provided by the manufacturer
Deflection Temperature at 1.8 MPa (264 psi) 68.0 °C
154 °F
ASTM D648
Beijing Chemical Industry KAIFA® HN301-G0 PA6 Resin
High flame retardant, Good flowInformation provided by Beijing Chemical Industry Research Institute (Group)
Deflection Temperature at 1.8 MPa (264 psi) 68.0 °C
154 °F
ASTM D648
Toyobo Pelprene™ S-1001 Polyester TPE
Key Feature: Pelprene S typePelprene™ can be processed into a wide variety of articles from ultra-small precision parts to sheets by injection, extrusion, and blow molding. The 'S' type is a block..
Deflection Temperature at 1.8 MPa (264 psi) 68.0 °C
154 °F
120°C/h; ISO 75/1
Polykemi AB POLYfill PPHC K9030 Polypropylene, Mineral Reinforced
Information provided by Polykemi AB
Copyright © lookpolymers.com All Rights Reserved