- HOME
- POLYMER SEARCH
- Polymer Property : CTE, linear = 23.4 µm/m-°C
Polymer Property : CTE, linear = 23.4 µm/m-°C Product List
Thermal PropertiesTips: 30 items are displayed at most. For the rest of the results, please contact customer service.
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| CTE, linear | 23.4 µm/m-°C @Temperature 20.0 °C |
13.0 µin/in-°F @Temperature 68.0 °F |
ASTM D696 |
| Ravago Manufacturing Americas Hylon® N1033HL Nylon 6/6 (DAM) Information provided by Ravago. |
|||
| CTE, linear | 23.4 µm/m-°C @Temperature -40.0 - 149 °C |
13.0 µin/in-°F @Temperature -40.0 - 300 °F |
ASTM E831 |
| Quadrant EPP Duratron® PBI CU60 Polybenzimidazole, unfilled, compression molded (ASTM Product Data Sheet) Duratron® PBI is the highest performance engineering plastic available from Quadrant EPP. It offers the highest mechanical properties of any thermoplastic above 400° F (205° C). Duratron® PBI .. |
|||
| CTE, linear | 23.4 µm/m-°C @Temperature 20.0 °C |
13.0 µin/in-°F @Temperature 68.0 °F |
ASTM D696 |
| Ravago Manufacturing Americas Hylon® N1033L Nylon 6/6 (DAM)
(discontinued **) Information provided by Ravago. |
|||
| CTE, linear | 23.4 - 30.0 µm/m-°C | 13.0 - 16.7 µin/in-°F | Average value: 26.4 µm/m-°C Grade Count:4 |
| Overview of materials for Polyphenylene Sulfide (PPS) with 20% Glass Fiber Filler This property data is a summary of similar materials in the MatWeb database for the category "Polyphenylene Sulfide (PPS) with 20% Glass Fiber Filler". Specific grades with glass content between 15%.. |
|||
| CTE, linear | 23.4 - 101 µm/m-°C | 13.0 - 56.0 µin/in-°F | Average value: 65.1 µm/m-°C Grade Count:11 |
| Overview of materials for Nylon 6, Glass Fiber/Solid Lube Filled This property data is a summary of similar materials in the MatWeb database for the category "Nylon 6, Glass Fiber/Solid Lube Filled". Each property range of values reported is minimum and maximum v.. |
|||
| CTE, linear | 23.4 µm/m-°C @Temperature 20.0 - 100 °C |
13.0 µin/in-°F @Temperature 68.0 - 212 °F |
|
| Kaiser 7068 T6, T651 Rod & Bar Alloy 7068 offers some of the highest strength mechanical properties available in an extruded product. Intended for aerospace, ordnance and light weight recreational applications where extremely hig.. |
|||
| CTE, linear | 23.4 µm/m-°C @Temperature 20.0 - 100 °C |
13.0 µin/in-°F @Temperature 68.0 - 212 °F |
|
| Kaiser 7068 T6, T6511 Rod & Bar Alloy 7068 offers some of the highest strength mechanical properties available in an extruded product. Intended for aerospace, ordnance and light weight recreational applications where extremely hig.. |
|||
| CTE, linear | 23.4 µm/m-°C @Temperature 20.0 - 100 °C |
13.0 µin/in-°F @Temperature 68.0 - 212 °F |
|
| Kaiser 7068 T76, T76511 Rod & Bar Alloy 7068 offers some of the highest strength mechanical properties available in an extruded product. Intended for aerospace, ordnance and light weight recreational applications where extremely hig.. |
|||
| CTE, linear | 23.4 µm/m-°C @Temperature 20.0 °C |
13.0 µin/in-°F @Temperature 68.0 °F |
ASTM D696 |
| Techmer ES Plaslube® J-1850/30/TF/15 PBT, 30% GFR, 15% PTFE |
|||
| CTE, linear | 23.4 µm/m-°C @Temperature 20.0 °C |
13.0 µin/in-°F @Temperature 68.0 °F |
ASTM D696 |
| Techmer ES Electrafil® J-50/CF/20 Polycarbonate, 20% Carbon Fiber Reinforced Carbon Fiber Reinforced |
|||
| CTE, linear | 23.4 µm/m-°C @Temperature 20.0 - 100 °C |
13.0 µin/in-°F @Temperature 68.0 - 212 °F |
average |
| Alcoa Excalibar® 6013-T8 Aluminum, 0.3-1.9 cm diameter Weldability = A; Stress Corrosion Cracking Resistance = A; General Corrosion Resistance = B (A = best; E = worst). General 6013 characteristics and uses: High strength and good corrosion resistance... |
|||
| CTE, linear | 23.4 µm/m-°C @Temperature 20.0 - 100 °C |
13.0 µin/in-°F @Temperature 68.0 - 212 °F |
average |
| Alcoa Excalibar® 6013-T8 Aluminum, 1.9-3.8 cm diameter Weldability = A; Stress Corrosion Cracking Resistance = A; General Corrosion Resistance = B (A = best; E = worst). General 6013 characteristics and uses: High strength and good corrosion resistance... |
|||
| CTE, linear | 23.4 µm/m-°C @Temperature 20.0 - 100 °C |
13.0 µin/in-°F @Temperature 68.0 - 212 °F |
average |
| Alcoa Excalibar® 6013-T8 Aluminum, 3.8-8.2 cm diameter Weldability = A; Stress Corrosion Cracking Resistance = A; General Corrosion Resistance = B (A = best; E = worst). General 6013 characteristics and uses: High strength and good corrosion resistance... |
|||
| CTE, linear | 23.4 µm/m-°C @Temperature 20.0 - 100 °C |
13.0 µin/in-°F @Temperature 68.0 - 212 °F |
average |
| Alcoa Excalibar® 6013-T651 Aluminum Alcoa recommends as a higher machinability alternative to 6061-T651. It has the potential for higher machining speeds and feed rates, easier deburring,ease of clearing 'chips' and better finishes. .. |
|||
| CTE, linear | 23.4 µm/m-°C @Temperature 20.0 - 100 °C |
13.0 µin/in-°F @Temperature 68.0 - 212 °F |
|
| Constellium DOKIMA® Rolled Plate Aluminum DOKIMA® rolled plates have moderate strength properties, a very low level of impurities, an excellent corrosion resistance, a very good dimensional stability and high thermal and electrical conduct.. |
|||
| CTE, linear | 23.4 µm/m-°C @Temperature 20.0 - 100 °C |
13.0 µin/in-°F @Temperature 68.0 - 212 °F |
|
| Constellium PLAN 6061 Aluminum Rolled Plate Rolled plates in 6061 PLAN are optimized for minimum residual stress and improved dimensional tolerances. 6061 PLAN is mainly used for medium stressed mechanical components, manufactured by intensiv.. |
|||
| CTE, linear | 23.4 µm/m-°C @Temperature 20.0 - 100 °C |
13.0 µin/in-°F @Temperature 68.0 - 212 °F |
|
| Constellium PLAN 6082 Aluminum Rolled Plate Rolled plates in 6082 PLAN are optimized for minimum residual stress and improved dimensional tolerances. 6082 PLAN is mainly used for medium stressed mechanical components, manufactured by intensiv.. |
|||
| CTE, linear | 23.4 µm/m-°C @Temperature 20.0 - 100 °C |
13.0 µin/in-°F @Temperature 68.0 - 212 °F |
|
| Constellium Planoxal® 60 Aluminum plate The advantage of Planoxal®-60 plates over other standard EN AW-6082 alloy products is their low level of internal stress. They are also suitable for technical anodizing. Planoxal®-60 is mainly use.. |
|||
| CTE, linear | 23.4 µm/m-°C @Temperature 20.0 - 100 °C |
13.0 µin/in-°F @Temperature 68.0 - 212 °F |
|
| Constellium ALPLAN® 6061 Rolled Precision Aluminum Plate, Milled Both Sides Precision plates in ALPLAN® 6061 are milled on both sides and have a very low level of residual stress, thus avoiding excessive deformation during machining. Thanks to its very good dimensional sta.. |
|||
| CTE, linear | 23.4 µm/m-°C @Temperature 20.0 - 100 °C |
13.0 µin/in-°F @Temperature 68.0 - 212 °F |
|
| Constellium ALPLAN® 6082 Rolled Precision Aluminum Plate, Milled Both Sides Precision plates in ALPLAN® 6082 are milled on both sides and have a very low level of residual stress, thus avoiding excessive deformation during machining. Thanks to its very good dimensional sta.. |
|||
| CTE, linear | 23.4 µm/m-°C @Temperature 20.0 °C |
13.0 µin/in-°F @Temperature 68.0 °F |
|
| ALIMEX PLANAL 6082 T651 Aluminum Alloy Aluminium rolled plates which have been machined on both sides. Has a precise surface finish and high tensile strength. The temper values and the material conditions are not changed by surface-machi.. |
|||
| CTE, linear | 23.4 µm/m-°C @Temperature 20.0 °C |
13.0 µin/in-°F @Temperature 68.0 °F |
|
| ALIMEX PLANAL 7075 T651/T652 Aluminum Alloy Aluminium rolled plates which have been machined on both sides. Has a precise surface finish and high tensile strength. The temper values and the material conditions are not changed by surface-machi.. |
|||
| CTE, linear | 23.4 µm/m-°C @Temperature 20.0 °C |
13.0 µin/in-°F @Temperature 68.0 °F |
ASTM D696 |
| Asahi Kasei Thermylene® P7-40FG-0600 40% Glass Fiber Reinforced, Heat Stabilized Information provided by Asahi Thermofil |
|||
| CTE, linear | 23.4 µm/m-°C @Temperature 20.0 °C |
13.0 µin/in-°F @Temperature 68.0 °F |
|
| ALIMEX 6082 T651 Aluminum Alloy Rolled Rolled aluminium material according to DIN EN standard. Information provided by ALIMEX GmbHSolution heat treated, stress relieved by stretching a controlled amount and then artificially aged. |
|||
| CTE, linear | 23.4 µm/m-°C @Temperature 20.0 °C |
13.0 µin/in-°F @Temperature 68.0 °F |
|
| ALIMEX 7075 T651/T652 Aluminum Alloy Rolled Rolled aluminium material according to DIN EN standard. Information provided by ALIMEX GmbHSolution heat treated, stress-relieved by stretching a controlled amount then artificially aged. / Solution.. |
|||
| CTE, linear | 23.4 µm/m-°C @Temperature 20.0 °C |
13.0 µin/in-°F @Temperature 68.0 °F |
|
| ALIMEX AMP 8000 Aluminum Plate AMP 8000 offers higher strength levels, good machinability and dimensional stability. Its tensile strength is up to 40% higher than AlZn5.5MgCu (7075). Moulding, (Prototypes) injection moulds, Jig .. |
|||
| CTE, linear | 23.4 - 58.0 µm/m-°C | 13.0 - 32.2 µin/in-°F | Average value: 36.3 µm/m-°C Grade Count:19 |
| Overview of materials for Polycarbonate, Glass + PTFE Filled This property data is a summary of similar materials in the MatWeb database for the category "Polycarbonate, Glass + PTFE Filled". Each property range of values reported is minimum and maximum value.. |
|||
| CTE, linear | 23.4 µm/m-°C | 13.0 µin/in-°F | |
| BCC Products BC 5010 Epoxy Laminating System BC 5010 is a high quality, low viscosity room temperature curing laminating resin. A Safety System for the production of a variety of dimensionally stable fiberglass tools. BC 5010 features low odor.. |
|||
Copyright © lookpolymers.com All Rights Reserved