Processing Properties | Metric | English | Comments |
---|---|---|---|
Cure Time | 600 min @Temperature 23.0 °C |
10.0 hour @Temperature 73.4 °F |
|
Master Bond EP22 Aluminum Filled Tough Two Component Epoxy Compound Master Bond Polymer System EP22 is an aluminum filled, two component epoxy adhesive for high performance bonding, sealing, and coating. It is formulated to cure at room temperature or more rapidly a.. |
|||
Cure Time | 600 min @Temperature 32.0 °C |
10.0 hour @Temperature 89.6 °F |
Overend Coat |
Chesterton ARC 855 Abrasion Control Liquid Description: An advanced ceramic composite formulated to protect equipment from aggressive chemical attack, corrosion, and erosion. The product is a low viscosity composite that is easily applied by.. |
|||
Cure Time | 600 min @Temperature 25.0 °C |
10.0 hour @Temperature 77.0 °F |
Light Load/Overcoat End |
Chesterton ARC 982 100% Novolac acid resistant coating Description: An advanced polymer composite formulated to protect equipment from extreme chemical attack and corrosion. A low viscosity composite that is applied by brush, squeegee, or a plural compo.. |
|||
Cure Time | 600 min @Temperature 25.0 °C |
10.0 hour @Temperature 77.0 °F |
Foot Traffic |
Chesterton ARC CS4 low-viscosity, 100% solids, barrier coating Description: An advanced composite formulated to protect concrete surfaces from harsh chemical attack. It is normally applied at a thickness of 250-375 microns (10-15 mils) per coat in a 2 coat syst.. |
|||
Cure Time | 600 min @Temperature 25.0 °C |
10.0 hour @Temperature 77.0 °F |
Light Load |
Chesterton ARC S2 Ceramic reinforced erosion resistant coating Description: An advanced ceramic composite for the resurfacing and protection of all metal surfaces. It is normally applied at a thickness of 250 microns (10 mils) per coat. Non-shrinking, 100% soli.. |
|||
Cure Time | 600 min @Temperature 32.0 °C |
10.0 hour @Temperature 89.6 °F |
Overcoat End |
Chesterton ARC S2 Ceramic reinforced erosion resistant coating Description: An advanced ceramic composite for the resurfacing and protection of all metal surfaces. It is normally applied at a thickness of 250 microns (10 mils) per coat. Non-shrinking, 100% soli.. |
|||
Cure Time | 600 min @Temperature 25.0 °C |
10.0 hour @Temperature 77.0 °F |
Light Load |
Chesterton ARC SD4i High temperature ceramic reinforced erosion resistant coating Description: An advanced ceramic composite for resurfacing and protection of metal surfaces in immersion service. It is normally applied in a thickness range of 250-370 microns (10-15 mils) per coat.. |
|||
Cure Time | 600 min @Temperature 32.0 °C |
10.0 hour @Temperature 89.6 °F |
Overcoat End |
Chesterton ARC SD4i High temperature ceramic reinforced erosion resistant coating Description: An advanced ceramic composite for resurfacing and protection of metal surfaces in immersion service. It is normally applied in a thickness range of 250-370 microns (10-15 mils) per coat.. |
|||
Cure Time | 600 min @Temperature 25.0 °C |
10.0 hour @Temperature 77.0 °F |
Light Load |
Chesterton MRS S2 Metal Rebuilding System An advanced ceramic composite for the resurfacing and protection of all metal surfaces. It is normally applied at a thickness of 250 microns (10 mils) per coat. Non-shrinking, 100% solids. MRS S2 is.. |
|||
Cure Time | 600 min @Temperature 32.0 °C |
10.0 hour @Temperature 89.6 °F |
Overcoat End |
Chesterton MRS S2 Metal Rebuilding System An advanced ceramic composite for the resurfacing and protection of all metal surfaces. It is normally applied at a thickness of 250 microns (10 mils) per coat. Non-shrinking, 100% solids. MRS S2 is.. |
|||
Cure Time | 600 min @Temperature 16.0 °C |
10.0 hour @Temperature 60.8 °F |
Tack Free |
Chesterton MRS S4+ Metal Rebuilding System An advanced polymer composite formulated to protect equipment from extreme chemical attack and corrosion. It is typically applied by spray, roller or brush at a nominal thickness of 375 microns (15 .. |
|||
Cure Time | 600 min @Temperature 25.0 °C |
10.0 hour @Temperature 77.0 °F |
Light Load |
Chesterton MRS SD4i Metal Rebuilding System An advanced ceramic composite for resurfacing and protection of metal surfaces in immersion service. It is normally applied in a thickness range of 250-370 microns (10 – 15 mils) per coat. Non-shri.. |
|||
Cure Time | 600 min @Temperature 32.0 °C |
10.0 hour @Temperature 89.6 °F |
Overcoat End |
Chesterton MRS SD4i Metal Rebuilding System An advanced ceramic composite for resurfacing and protection of metal surfaces in immersion service. It is normally applied in a thickness range of 250-370 microns (10 – 15 mils) per coat. Non-shri.. |
|||
Cure Time | 600 min @Temperature 10.0 °C |
10.0 hour @Temperature 50.0 °F |
Tack Free |
Chesterton ARC HT-S High Temperature Corrosion Resistant Coating Description: ARC HT-S is a high temperature corrosion resistant coating for continuous operating conditions at elevated temperatures. It is easily applied by brush or roller and can be sprayed with .. |
|||
Cure Time | 600 min @Temperature 50.0 °C |
10.0 hour @Temperature 122 °F |
|
Atom Adhesives AA-BOND G298 Epoxy Adhesive AA-BOND G298 is a two component, gold-filled, electrically and thermally conductive epoxy designed for hybrid microelectronic and semiconductor packaging.Appearance: Resin: Brown, Hardener: Dark Bro.. |
|||
Cure Time | 600 min @Temperature 25.0 °C |
10.0 hour @Temperature 77.0 °F |
Foot Traffic |
Chesterton ARC CS2 Low-viscosity, Composite concrete primer sealer Description: An advanced composite formulated to protect concrete surfaces from mild chemical attack. It is normally applied at a thickness of 250-375 microns (10-15 mils) per coat. Non-shrinking. 1.. |
|||
Cure Time | 600 min @Temperature 16.0 °C |
10.0 hour @Temperature 60.8 °F |
Tack Free |
Chesterton ARC S4+ 100% Novolac acid resistant coating Description: An advanced polymer composite formulated to protect equipment from extreme chemical attack and corrosion. It is typically applied by spray, roller or brush at a nominal thickness of 375.. |
|||
Cure Time | 600 min @Temperature 4.40 °C |
10.0 hour @Temperature 39.9 °F |
|
3M AC-250 B-1/6 Aerospace Sealant 3M Aerospace Sealant AC-250 B-1/6 is a two-part, polysulfide, quick repair sealant for integral fuel tank and fuselage sealing applications. The mixed compound is a thixotropic paste and can be read.. |
|||
Cure Time | 600 min @Temperature 10.0 °C |
10.0 hour @Temperature 50.0 °F |
Tack Free |
Chesterton ARC S1HB Sprayable high-viscosity, 100% solids, advanced coating An advanced composite formulated to protect concrete and metal surfaces from corrosion and chemical attack. It is normally applied at a thickness of 1-2 mm (40-80 mils) per coat. However, greater si.. |