Processing Properties | Metric | English | Comments |
---|---|---|---|
Cure Time | 5760 - 10100 min @Temperature 25.0 °C |
96.0 - 168 hour @Temperature 77.0 °F |
full cure |
Permabond ET5401 Epoxy Resin PERMABOND® ET5401 is a two-part, 2:1 mixable, semi-flexible toughened no slump epoxy adhesive with good adhesion to a variety of substrates such as wood, metal, ceramics and some plastics and compo.. |
|||
Cure Time | 5760 min @Temperature 25.0 °C |
96.0 hour @Temperature 77.0 °F |
Full |
Lord Adhesives Thermoset™ UR-322 Two Component Urethane Potting Compound Lord UR-322 is a two component, room temperature curing urethane potting compound. The cured elastomer is soft, flexible and has a very low modulus at temperatures down to -80°C. Cured UR-322 als.. |
|||
Cure Time | 5760 min @Temperature 25.0 °C |
96.0 hour @Temperature 77.0 °F |
|
Tra-Con Tra-Duct 2956 Low Ion Snap Cure Silver Epoxy Adhesive TRA-DUCT 2956 is recommended for the bonding and sealing of electronic components where a combination of electrical and mechanical properties are required. This two-part, smooth, paste system of sil.. |
|||
Cure Time | 5760 min @Temperature 10.0 °C |
96.0 hour @Temperature 50.0 °F |
Full Chemical |
Chesterton ARC 10 Paste grade machinable composite Description: A reinforced composite for the repair and protection of metal surfaces. It is machinable with excellent compressive strength, chemical resistance and corrosion resistance. It is non-sag.. |
|||
Cure Time | 5760 min @Temperature 10.0 °C |
96.0 hour @Temperature 50.0 °F |
Full Load |
Chesterton ARC 855 Abrasion Control Liquid Description: An advanced ceramic composite formulated to protect equipment from aggressive chemical attack, corrosion, and erosion. The product is a low viscosity composite that is easily applied by.. |
|||
Cure Time | 5760 min @Temperature 16.0 °C |
96.0 hour @Temperature 60.8 °F |
Full Chemical |
Chesterton ARC 855 Abrasion Control Liquid Description: An advanced ceramic composite formulated to protect equipment from aggressive chemical attack, corrosion, and erosion. The product is a low viscosity composite that is easily applied by.. |
|||
Cure Time | 5760 min @Temperature 10.0 °C |
96.0 hour @Temperature 50.0 °F |
Full Chemical |
Chesterton ARC 858 Abrasion resistant rebuilding and faring composite An advanced ceramic composite for the repair and protection of all metal surfaces subjected to erosion, corrosion and chemical attack. It is normally applied at a thickness of 0.15 mm (60 mils) or m.. |
|||
Cure Time | 5760 min @Temperature 10.0 °C |
96.0 hour @Temperature 50.0 °F |
Full Chemical |
Chesterton ARC 897 Fine Grade Sliding Wear Compound Description: ARC 897 is an advanced ceramic reinforced composite for the repair and protection of all metal surfaces subjected to severe erosion, corrosion, and chemical attack. It is applied at a t.. |
|||
Cure Time | 5760 min @Temperature 10.0 °C |
96.0 hour @Temperature 50.0 °F |
Full Chemical |
Chesterton ARC BX2 Contractor Grade Fine Sliding Wear Compound Description: ARC BX2 is an advanced contractor grade ceramic reinforced composite for the repair and protection of all metal surfaces subjected to severe erosion, corrosion, and chemical attack. It .. |
|||
Cure Time | 5760 min @Temperature 25.0 °C |
96.0 hour @Temperature 77.0 °F |
Full Mechanical/Chemical |
Chesterton ARC MXHT High temperature severe wear compound Description: An advanced ceramic composite for the protection of all metal surfaces subjected to severe erosion, abrasion and chemical attack at elevated temperatures. It is applied at a thickness o.. |
|||
Cure Time | 5760 min @Temperature 16.0 °C |
96.0 hour @Temperature 60.8 °F |
Full Chemical |
Chesterton ARC S2 Ceramic reinforced erosion resistant coating Description: An advanced ceramic composite for the resurfacing and protection of all metal surfaces. It is normally applied at a thickness of 250 microns (10 mils) per coat. Non-shrinking, 100% soli.. |
|||
Cure Time | 5760 min @Temperature 16.0 °C |
96.0 hour @Temperature 60.8 °F |
Full Chemical |
Chesterton ARC SD4i High temperature ceramic reinforced erosion resistant coating Description: An advanced ceramic composite for resurfacing and protection of metal surfaces in immersion service. It is normally applied in a thickness range of 250-370 microns (10-15 mils) per coat.. |
|||
Cure Time | 5760 min @Temperature 16.0 °C |
96.0 hour @Temperature 60.8 °F |
Full Chemical |
Chesterton MRS S2 Metal Rebuilding System An advanced ceramic composite for the resurfacing and protection of all metal surfaces. It is normally applied at a thickness of 250 microns (10 mils) per coat. Non-shrinking, 100% solids. MRS S2 is.. |
|||
Cure Time | 5760 min @Temperature 16.0 °C |
96.0 hour @Temperature 60.8 °F |
Full Chemical |
Chesterton MRS SD4i Metal Rebuilding System An advanced ceramic composite for resurfacing and protection of metal surfaces in immersion service. It is normally applied in a thickness range of 250-370 microns (10 – 15 mils) per coat. Non-shri.. |
|||
Cure Time | 5760 min @Temperature 25.0 °C |
96.0 hour @Temperature 77.0 °F |
Full Mechanical |
Chesterton ARC HT-S High Temperature Corrosion Resistant Coating Description: ARC HT-S is a high temperature corrosion resistant coating for continuous operating conditions at elevated temperatures. It is easily applied by brush or roller and can be sprayed with .. |
|||
Cure Time | 5760 min @Temperature 25.0 °C |
96.0 hour @Temperature 77.0 °F |
Full Chemical |
Chesterton ARC HT-S High Temperature Corrosion Resistant Coating Description: ARC HT-S is a high temperature corrosion resistant coating for continuous operating conditions at elevated temperatures. It is easily applied by brush or roller and can be sprayed with .. |
|||
Cure Time | 5760 min @Temperature 10.0 °C |
96.0 hour @Temperature 50.0 °F |
Full Chemical |
Chesterton ARC MX2 High Wear Fine Particle Wear Compound Description: An advanced ceramic composite for the repair and protection of all metal surfaces subjected to severe erosion, corrosion and chemical attack. It is applied at a thickness of 3 mm (1/8”.. |
|||
Cure Time | 5760 - 11520 min @Temperature 20.0 °C |
96.0 - 192.0 hour @Temperature 68.0 °F |
(4-8 days) |
Abatron AboCoat 8501-2/AboCure 8501-2 Clear Epoxy Coating AboCoat 8501-2 is a clear, light amber resin made of 85% solids. It has a viscosity of 21-23 poises and a weight of 9.3 lbs/gallon. AboCure 8501-2 is a clear, light amber converter made of 85% solid.. |
|||
Cure Time | 5760 - 8640 min @Temperature 15.556 - 26.667 °C |
96.0 - 144 hour @Temperature 60.001 - 80.001 °F |
(4-6 Days) |
Abatron AboTar 8607-1 Solventless Tar-Epoxy Compound AboTar 8607-1 is a 2-part tar-epoxy lower cost system for filling and leveling pot holes and grossly uneven flooring. It can be used neat or with sand or aggregates. Uses: Resurfacing concrete and .. |
|||
Cure Time | 5760 min @Temperature 10.0 °C |
96.0 hour @Temperature 50.0 °F |
Full Chemical |
Chesterton MRS 10 Metal Rebuilding System Description: A reinforced composite for the repair and protection of metal surfaces. It is machinable with excellent compressive strength, chemical resistance It is non-sagging, non-shrinking and 10.. |
|||
Cure Time | 5760 min @Temperature 10.0 °C |
96.0 hour @Temperature 50.0 °F |
Full Chemical |
Chesterton MRS 58 Metal Rebuilding System An advanced ceramic composite for the repair and protection of all metal surfaces subjected to erosion, corrosion and chemical attack. It is normally applied at a thickness of 1.5 mm (60 mils) or mo.. |