Processing Properties | Metric | English | Comments |
---|---|---|---|
Mold Temperature | 4.44 - 65.6 °C | 40.0 - 150 °F | |
Multibase Multi-Pro® 2514 XU Polypropylene Mineral Filled, 25% by weight.Features:Heat Resistance, HighForms:PelletsProcessing Methods:Injection MoldingUses:AppliancesFurnitureTable ProductsInformation provided by Multibase |
|||
Mold Temperature | 37.8 - 65.6 °C | 100 - 150 °F | |
Fiberfil® J-69/10/E/UV High performance polypropylene Homopolymer, 10% Glass Reinforced, Chemically coupled, UV Stabilized Information provided by FIBERFIL Engineered Plastics |
|||
Mold Temperature | 10.0 - 65.6 °C | 50.0 - 150 °F | Injection Molding |
Teknor Apex Sarlink® 4390 Thermoplastic Elastomer A highly engineered thermoplastic elastomer for use in demanding applications. Sarlink® 4390 is a flame retardant, high hardness grade processing exceptional chemical resistance, compression set .. |
|||
Mold Temperature | 10.0 - 65.6 °C | 50.0 - 150 °F | Injection Molding |
Teknor Apex Sarlink® 4445 Thermoplastic Elastomer A NSF certified, highly engineered Thermoplastic Elastomer for use in demanding applications. Sarlink® 4445 is a low hardness grade possessing exceptional tensile strength, superior compression s.. |
|||
Mold Temperature | 25.0 - 65.6 °C | 77.0 - 150 °F | |
Teknor Apex Telcar® OBC 4675A Thermoplastic Elastomer Uses: Automotive Applications; Automotive Exterior Parts; Automotive Exterior Trim; Automotive Interior Parts; Blow Molding Applications; General Purpose; Grommets; Weatherstripping Forms: Pellets P.. |
|||
Mold Temperature | 25.0 - 65.6 °C | 77.0 - 150 °F | |
Teknor Apex Telcar® TL-1025-72 Thermoplastic Elastomer Uses: Automotive Applications; Automotive Exterior Parts; Automotive Exterior Trim; Automotive Interior Parts; Blow Molding Applications; Closures; General Purpose; Grommets; Weatherstripping Forms:.. |
|||
Mold Temperature | 25.0 - 65.6 °C | 77.0 - 150 °F | |
Teknor Apex Telcar® TL-1934E Styrenic Thermoplastic Elastomer Uses: Appliance Wire Insulation; Cable Jacketing; Flexible Cord Insulation; Wire and Cable Applications; Wire Jacketing Agency Ratings: UL 1581 Forms: Pellets Processing Method: Extrusion; Injection.. |
|||
Mold Temperature | 25.0 - 65.6 °C | 77.0 - 150 °F | |
Teknor Apex Telcar® TL-2519E Thermoplastic Elastomer Uses: Consumer Applications; Flexible Grips; General Purpose; Handles; Safety Equipment; Toys Forms: Pellets Processing Method: Extrusion; Injection Molding Injection Notes: Injection Rate: Moderat.. |
|||
Mold Temperature | 30.0 - 65.6 °C | 86.0 - 150 °F | |
A. Schulman SCHULADUR® A GF15 15% Glass Fiber Reinforced PBT Information provided by A. Schulman. |
|||
Mold Temperature | 30.0 - 65.6 °C | 86.0 - 150 °F | |
A. Schulman SCHULADUR® A GF33HI 33% Glass Fiber Reinforced, High Impact PBT Information provided by A. Schulman. |
|||
Mold Temperature | 25.0 - 65.6 °C | 77.0 - 150 °F | |
Teknor Apex Telcar® TL-90-T707E-100 BLK 111 Thermoplastic Elastomer Uses: Automotive Applications; Automotive Exterior Parts; Automotive Exterior Trim; Automotive Interior Parts; Blow Molding Applications; General Purpose; Grommets; Weatherstripping Forms: Pellets .. |
|||
Mold Temperature | 37.8 - 65.6 °C | 100 - 150 °F | |
Clariant Renol PP1100N40CC Polypropylene Homopolymer, 40% Glass Fiber and Mineral Reinforced, Chemically Coupled Data provided by Clariant Masterbatches |
|||
Mold Temperature | 51.7 - 65.6 °C | 125 - 150 °F | |
Clariant Renol PPT10 Polypropylene Copolymer, Talc Filled Data provided by Clariant Masterbatches |
|||
Mold Temperature | 25.0 - 65.6 °C | 77.0 - 150 °F | Average value: 49.4 °C Grade Count:4 |
Overview of materials for Nylon 11, Unreinforced This property data is a summary of similar materials in the MatWeb database for the category "Nylon 11, Unreinforced". Each property range of values reported is minimum and maximum values of appropr.. |
|||
Mold Temperature | 26.7 - 65.6 °C | 80.0 - 150 °F | Average value: 43.4 °C Grade Count:10 |
Overview of materials for Polypropylene with 30% Mica Filler This property data is a summary of similar materials in the MatWeb database for the category "Polypropylene with 30% Mica Filler". Specific grades with primary filler content between 25% and 34% are.. |