Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

Polymer Property : Melt Temperature = 572 °F Product List

Processing Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.
Processing Properties Metric English Comments
Melt Temperature 270 - 300 °C
518 - 572 °F
Plastcom SLOVAMID 6 GF 65 PA6, 65% glass fibre
FeaturesPA 6 for injection moulding, chemically strengthened with 65% of glass fibre, for mouldings with high strength and toughness used in the automotive, electrical, engineering and consumer-good..
Melt Temperature 280 - 300 °C
536 - 572 °F
Plastcom SLOVAMID 66 GF 15 TS PA66, 15% glass fibre
FeaturesChemically reinforced with 15% glass fibre, suitable for mouldings with high strength and toughness also at minus temperatures. Used in the automotive, engineering and electrical industry. W..
Melt Temperature 280 - 300 °C
536 - 572 °F
Plastcom SLOVAMID 66 GF 20 GF 10 PA66, 20% glass fibre, glass beads
FeaturesPA 66 chemically reinforced with 20% glass fibre and with the content of 10 % glass beads. Improved anisotropy of shrinkage. The relation of the anisotropy to the mechanical properties can b..
Melt Temperature 280 - 300 °C
536 - 572 °F
Plastcom SLOVAMID 66 GF 25 FRI 2 PA66, 25% glass fibre, flame retardant
FeaturesPA 66 for injection moulding, chemically reinforced with 25% glass fibre and non-halogen flame retardant, with heat resistance and nonflammability, achieves V 0 in accordance with UL 94. Non..
Melt Temperature 280 - 300 °C
536 - 572 °F
Plastcom SLOVAMID 66 GF 30 HI PA66, 30% glass fibre, improved strength
FeaturesPA 66 for injection moulding, chemically strengthened with 30% glass fibre and with the content of thermoplastic kaoutchouc. Application: impacted mouldings and mouldings with high strength ..
Melt Temperature 280 - 300 °C
536 - 572 °F
Plastcom SLOVAMID 66 GF 35 FRG 5 Polyamide 66, 35% Glass Fiber, Halogen Free Flame Retardant
FeaturesPA 66 for injection moulding, chemical reinforced with 35% glass fiber and non-halogen flame retardant, with heat and flammability resistance, achieves V-0 in accordance with UL 94. Non-hal..
Melt Temperature 275 - 300 °C
527 - 572 °F
Do not melt above 300°C
Nilit Nilamid A3 H G4 General Purpose 20% Glass Reinforced PA66
Description: Nilamid A3 H G4 is a general purpose, 20% glass fiber reinforced NYLON 66. This product combine good overall mechanical performance and impact strength with ease of processing.Key chara..
Melt Temperature 275 - 300 °C
527 - 572 °F
Do not melt above 300°C
Nilit Nilamid A3 H6 G5 25% Glass Reinforced PA66
Description: Nilamid A3 H6 G5 is a 25% glass fiber reinforced NYLON 66 with a special stabilization system against hot oil and grease. As a result of this stabilization, the material has a brown nat..
Melt Temperature 280 - 300 °C
536 - 572 °F
DAM; Injection Molding
DuPont Performance Polymers Zytel® 45HSB NC010 Nylon 66  (Unverified Data**)
Zytel® 45HSB NC010 is a high viscosity, heat stabilized polyamide 66 resin for injection molding and extrusion.Information provided by DuPont Performance Polymers
Melt Temperature 280 - 300 °C
536 - 572 °F
DAM
DuPont Performance Polymers Zytel® FG133F1 NC010 Nylon 66  (Unverified Data**)
Zytel® FG133F1 NC010 is a nucleated PA 66. It has been developed for consideration into applications such as parts for the food industry.Information provided by DuPont
Melt Temperature 260 - 300 °C
500 - 572 °F
LG Chemical LUPOY GP-5200 General Purpose PC/ABS Alloy, 10% Polymer Alloy, High Strength
Among the characteristics of LUPOY polycarbonate resins are excellent mechanical properties, high heat resistance, high impact strength, and dimensional stability.Applications:Automotive: Automotive..
Melt Temperature 280 - 300 °C
536 - 572 °F
ISO 294
Gromax BFG45-B100N1 Nylon 6 46% Glass Filled (Conditioned)
Information provided by Gromax Enterprises Corp.
Melt Temperature 280 - 300 °C
536 - 572 °F
Lanxess Durethan® AKV 30 000000 Nylon 66, Glass Fiber Reinforced
PA 66, 30% glass fibers, injection moldingInformation provided by LANXESS.
Melt Temperature 275 - 300 °C
527 - 572 °F
LATI Latiohm 66-08 PD02 G/35 PA66, 35% Glass Fiber Reinforced
Semiconductive/dissipative product based on Polyamide 66 (PA66). Glass fibers. Availability: Africa & Middle East; Asia Pacific; Europe; Latin America; North AmericaInformation provided by Lati Ind..
Melt Temperature 260 - 300 °C
500 - 572 °F
Solvay Specialty Polymers Kalix® 2930 HFFR Polyamide, High Performance (HPPA), Glass Fiber
Kalix® 2930 HFFR is a bio-sourced polyamide-based material specifically formulated to meet UL 94V2 @ 0.4 mm requirements for electronic devices. The material uses an advanced halogen-free flame r..
Melt Temperature 280 - 300 °C
536 - 572 °F
Sax Polymers SAXAMID 226F4 Nylon 6.6, 20% Glass Fiber
SAXAMID 226F4 is a polyamide 6.6 injection-molding-grade reinforced with 20% glass fibers.Information provided by SAX Polymers
Melt Temperature 280 - 300 °C
536 - 572 °F
A. Schulman SCHULADUR® B GF15 15% Glass Fiber Reinforced PET
Information provided by A. Schulman.
Melt Temperature 280 - 300 °C
536 - 572 °F
A. Schulman ComAlloy® E-16558 30% Glass Fiber Reinforced Nylon
Information provided by A. Schulman.The ComAlloy product line has been integrated into the A Schulman product line.
Melt Temperature 280 - 300 °C
536 - 572 °F
Eurostar Starflam RF023P PA66/6, Glass Fiber Filled, Flame Retardant, Injection Molded
Starflam RF0023P is a Flame Retardant, Halogen Free, Red Phosphorous Free, Glass Reinforced Polyamide 66/6 Injection Molding (also known as Starflam PA66C U2 Z23)Information provided by Eurostar.
Melt Temperature 270 - 300 °C
518 - 572 °F
E-Polymers TEKANATE® G7010 General Purpose Polycarbonate
Modified Poly Carbonate: TEKANATE is a modified PC by improving polycarbonate resins with features of halogen-free flammability, transparency, impact resistance and reinforced fiberglass. It shows ..
Melt Temperature 270 - 300 °C
518 - 572 °F
E-Polymers TEKANATE® G7013FR General Purpose Easy Molding Flame Retardant Polycarbonate
Modified Poly Carbonate: TEKANATE is a modified PC by improving polycarbonate resins with features of halogen-free flammability, transparency, impact resistance and reinforced fiberglass. It shows ..
Melt Temperature 260 - 300 °C
500 - 572 °F
Akro-Plastic Akromid® B3 GF 60 (2476) PA 6 Dry, 60% Glass Filled
AKROMID® B (Polyamide 6) is an engineering compound, characterized by high mechanical strength, stiffness and thermal resistance. Furthermore, this polyamide offers high toughness at low temperatur..
Melt Temperature 280 - 300 °C
536 - 572 °F
Injection-molding/Extrusion
BASF Ultramid® FRee A3U40G5 25% Glass Filled PA66 FR (Conditioned)
Description: Flame retardant without halogens and red phosphorus, 25% glass fiber reinforced injection-molding grade; light colorable; outstanding mechanical and electrical properties.Information pr..
Melt Temperature 260 - 300 °C
500 - 572 °F
Akro-Plastic Akromid® B3 GF 30 9 RM-M (3099) PA 6 Dry, 30% Glass Filled
In all, the construction relevant features show that the significantly reduced moisture absorption of AKROMID B3 GF 30 RM leads to increasing rigidities and strengths as already expected. Neverthele..
Melt Temperature 280 - 300 °C
536 - 572 °F
Injection-molding/Extrusion
BASF Ultramid® A3HG6 HR BK 23591 30% Glass Filled PA66 (Dry)
Description: 30% glass-fiber reinforced injection-molding grade with enhanced hydrolysis resistance, e.g., for applications in vehicle cooling systems.Information provided by BASF
Melt Temperature 280 - 300 °C
536 - 572 °F
Injection Molding
LG Chemical LUXY KS G55 Amorphous PA6
Description: Injection Molding, Amorphous PA6, High Modulus, High Impact, Low WarpageApplication: Electric/Electronic Components (LCD Bracket)Information provided by LG Chemical
Melt Temperature 280 - 300 °C
536 - 572 °F
LATI LATILUB 80-40GRT Polyphenylene sulfide Base (PPS), 40% Graphite and PTFE Self Lubricating Plastic  (U
Description: Latilub self-lubricating plastic materials are more and more often designed to replace metals in applications such as gears, bushings, cams, slides, etc), for which, besides their intri..
Copyright © lookpolymers.com All Rights Reserved