Electrical Properties | Metric | English | Comments |
---|---|---|---|
Dielectric Strength | 13.0 - 19.0 kV/mm | 330 - 483 kV/in | ASTM D149 |
Polimersan Plastics POLITEF® (PTFE) with 25% Carbon As a result of Filled-In POLITEF® alloys, apart from all of its superior properties, POLITEF®, according to its usage areas has gained additional properties as described below:Electrical Conductiv.. |
|||
Dielectric Strength | 13.0 - 19.0 kV/mm | 330 - 483 kV/in | ASTM D149 |
Polimersan Plastics POLITEF® (PTFE) with 25% Carbon As a result of Filled-In POLITEF® alloys, apart from all of its superior properties, POLITEF®, according to its usage areas has gained additional properties as described below:Electrical Conductiv.. |
|||
Dielectric Strength | 13.0 kV/mm | 330 kV/in | ASTM D149 |
Chevron Phillips Ryton® R10 5002C PPS Polyphenylene Sulfide
(discontinued **) Ryton® PPS is used in many electronic and automotive applications because of its high strength, favorable electrical properties, and high temperature stability.Data provided by the manufacturer.Sol.. |
|||
Dielectric Strength | 13.0 kV/mm | 330 kV/in | ASTM D149 |
Plenco 501 Black Electrical Grade Mineral/Flock Filled Phenolic Molding Compound
(discontinued **) Plaslok 501 is a two-stage, mineral and flock-filled phenolic molding compound designed for use in heat resistant and electrical applications. It is designed for elevated temperature exposure for e.. |
|||
Dielectric Strength | 13.0 kV/mm | 330 kV/in | 150°C for 1,000 hrs |
Fujipoly Industries Sarcon® 45U Thin-Film UR Sarcon UR is Fujipolys originally developed High Heat Conductive/Low Hardness Silicone Rubber. Fine, high heat conductive ceramic particles are mixed with insulative silicone rubber.Information prov.. |
|||
Dielectric Strength | 13.0 kV/mm | 330 kV/in | 150°C for 1,000 hrs; JIS-K-6249 |
Fujipoly Industries Sarcon® GR-Fd Gap Filler Pad Sarcon GR-d is a highly conformable, thermally conductive material in areas where space between surfaces is uneven and surface textures vary. GR-Fd has a mesh embedded overall.Information provided b.. |
|||
Dielectric Strength | 13.0 kV/mm @Thickness 3.00 mm |
330 kV/in @Thickness 0.118 in |
ASTM D149 |
Teknor Apex Beetle® MD21 Nylon 6, Extrusion Grade Notes: MD21 is a medium viscosity grade of nylon 6, designed for wire coating extrusion. MD21 is heavily pigment and is designed to provide good opacity even with thin coatings. It also features a.. |
|||
Dielectric Strength | 13.0 kV/mm | 330 kV/in | Wet, short term. ASTM D149 |
Sumitomo Bakelite North America 4064 Mineral Filled Electrical Encapsulation Grade Epoxy Rogers electrical encapsulation grade epoxy is recommended for capacitors, resistors, gold lead encapsulation, relays, coils and bobbins.Information provided by Sumitomo Bak North America, Inc. |
|||
Dielectric Strength | 13.0 kV/mm @Thickness 3.00 mm |
330 kV/in @Thickness 0.118 in |
IEC 243 |
Sumitomo Bakelite North America RX® 611 Fiberglass Reinforced Phenolic RX 611 is a fiberglass reinforced phenolic molding compound, with good dimensional stability and good strength at elevated temperatures. Meets ASTM D-5948 Type MFH.Information supplied by Sumitomo.. |
|||
Dielectric Strength | 13.0 kV/mm | 330 kV/in | Wet, Step by Step |
Cosmic Plastics 306 Orlon Filled Ortho Diallyl Phthalate Molding Compound Data provided by the manufacturer. |
|||
Dielectric Strength | 13.0 kV/mm | 330 kV/in | ASTM D149-95a |
Thermoseal KLINGERSIL® C-6327 SBR Binder Gasketing Synthetic FiberModified SBR BinderControlled SwellUse for Low Temperatures and Low PressuresGood with Low Bolt LoadsInformation provided by Thermoseal Inc. |
|||
Dielectric Strength | 13.0 kV/mm | 330 kV/in | |
Elastomer Engineering Elastamide 100 Elastomer Modified RIM Nylon 6 30% crystallinity. Information supplied by Elastomer Engineering. |
|||
Dielectric Strength | 13.0 kV/mm | 330 kV/in | ASTM D149-95a |
Thermoseal KLINGERSIL® C-4324 Compressed Inorganic Fiber Gasketing Recycled Fiberglass & Aramid BlendNitrile BinderLow Pressure Steam, Water & GasesGood for Oils and FuelsInformation provided by Thermoseal Inc. |
|||
Dielectric Strength | 13.0 kV/mm | 330 kV/in | Short Time; ASTM D149 |
Plenco 2571 Phenolic, Granular, Injection Molded PLENCO 02571 is a general purpose, organic filled phenolic molding compound offering optimum cure characteristics while maintaining excellent mechanical and electrical properties. UL recognized unde.. |
|||
Dielectric Strength | 13.0 kV/mm | 330 kV/in | |
Dow Corning SE 4440 LP KIT Two-part, grey, 1:1, addition cure gel, good thermal conductivity, low viscosity.Information provided by Dow Corning |
|||
Dielectric Strength | 13.0 kV/mm | 329 kV/in | |
Dow Corning SE 4486 SILICONE RTV One-part, white, moisture cure RTV, highly flowable, fast tack-free, high thermal conductivity, controlled volatility.Information provided by Dow Corning |
|||
Dielectric Strength | 13.0 kV/mm | 330 kV/in | ASTM D149 |
Covestro Baydur® 726 IBS Polyurethane Structural Foam RIM, Density 40 pcf, MDI-based 2-Component Liquid System 0.25 in. thickness. IBS = Interactive Blowing System RIM = Reaction Injection MoldingInformation provided by Bayer Corporation, Polyurethanes DivisionAs of 1 September 2015, Bayer MaterialScience .. |
|||
Dielectric Strength | 13.0 kV/mm | 330 kV/in | Short Time |
Bulk Molding Compounds BMC 501 Mineral Filled, Glass Fiber Reinforced Compound BMC 501 molding compound is a mineral filled glass-fiber-reinforced compound suitable for compression, transfer and stuffer injection molding. It provides the user with good electrical properties An.. |
|||
Dielectric Strength | 13.0 kV/mm | 330 kV/in | Short Time |
Bulk Molding Compounds BMC 600 Mineral Filled, Glass Fiber Reinforced Polyester Compound BMC 600 molding compound is a mineral filled glass-fiber-reinforced polyester compound suitable for compression, transfer and stuffer injection molding. It is a general purpose material with medium .. |
|||
Dielectric Strength | 13.0 kV/mm | 330 kV/in | Short Time |
Bulk Molding Compounds BMC 2274 Mineral Filled, Glass Reinforced Polyester BMC 2274 molding compound is a mineral filled, glass-fiber-reinforced polyester compound suitable for compression transfer and stuffer injection molding. It is a general-purpose material with medium.. |
|||
Dielectric Strength | 13.0 - 100 kV/mm | 330 - 2540 kV/in | Average value: 28.4 kV/mm Grade Count:20 |
Overview of materials for Nylon 6, Extruded This property data is a summary of similar materials in the MatWeb database for the category "Nylon 6, Extruded". Each property range of values reported is minimum and maximum values of appropriate .. |
|||
Dielectric Strength | 13.0 kV/mm @Thickness 2.00 mm |
330 kV/in @Thickness 0.0787 in |
IEC 243-1 |
LATI LARTON G/50 50% Glass Fiber Filled Polyphenylene sulfide (PPS)
(discontinued **) Description: Larton thermoplastics are polyphenylene sulfide (PPS) products. They are distinguished by a group of very interesting properties combined with easy moldability. Larton parts feature: ex.. |
|||
Dielectric Strength | 13.0 kV/mm | 330 kV/in | ASTM D149 |
Plaslok 5440 Black General Purpose Phenolic Molding Compound
(discontinued **) Plaslok Corporation was purchased by Plastics Engineering Company (maker of Plenco brand materials) in March 2000. The Plaslok name is no longer in use.Plaslok 5440 is the replacement material for .. |
|||
Dielectric Strength | 13.0 kV/mm | 330 kV/in | Wet, Step by Step |
Cosmic Plastics 6120 Short Glass Fiber Filled Ortho Diallyl Phthalate Molding Compound Data provided by the manufacturer. |
|||
Dielectric Strength | 13.0 kV/mm | 330 kV/in | Wet, Step by Step |
Cosmic Plastics D33 Short Glass Fiber Filled Ortho Diallyl Phthalate Molding Compound Data provided by the manufacturer. |
|||
Dielectric Strength | 13.0 kV/mm | 330 kV/in | |
Quadrant EPP Duratron® PI D7015G PI, bearing grade (ISO Data) This grade contains 15 % graphite, added to provide long wear and low friction Good performance at elevated temperature (>425 °C) Good chemical resistance Easily machined from a broad range of shap.. |