Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

3M Dyneon™ PFE 80Z Peroxide Cure Perfluoroelastomer

Category Polymer , Thermoset , Fluoropolymer, TS , Thermoset Fluoroelastomer , Rubber or Thermoset Elastomer (TSE)
Manufacturer 3M Dyneon™
Trade Name
Port Shanghai port,China
Trade Terms FOB, CFR, CIF
Payment Terms L/C, T/T, Western Union
Download PDF 3M Dyneon™ PFE 80Z Peroxide Cure Perfluoroelastomer.pdf
Price EMAIL US    sales@lookpolymers.com
  Online Service   lookpolymers   27660005
Material Notes:
3M™ Dyneon™ Peroxide Cure Perfluoroelastomer PFE 80Z is a technically advanced peroxide curable perfluoroelastomer. This product is designed to have improved acid resistance and lower metal ion extractables making it ideal for wet process electronics manufacturing such as semiconductor and flat panel display. It is classified as FFKM per ASTM D1418. Its fully fluorinated back bone structure provides a very broad chemical and thermal stability.Features and Benefits:Ideal for wet chemical, fluid handling, cleaning and chemical etching processes and for semiconductor manufacturingGood acid resistanceUpper use temperature of 200°CVery low metal ion content with low extractables in a wide range of chemicalsPeroxide curable FFKMInformation provided by the Dyneon division of 3M.
Physical Properties Metric English Comments
Specific Gravity 2.00 g/cc
2.00 g/cc
Mooney Viscosity 80

@Temperature 121 °C
80

@Temperature 250 °F
ML 1+ 10
Mechanical Properties Metric English Comments
Hardness, Shore A 72
72
Press Cure 10 Minutes @ 177°C, Post Cure 16 Hours @ 200°C; ASTM D2240
Tensile Strength at Break 11.0 MPa
1600 psi
Press Cure 10 Minutes @ 177°C, Post Cure 16 Hours @ 200°C; ASTM D412
Elongation at Break 230 %
230 %
Press Cure 10 Minutes @ 177°C, Post Cure 16 Hours @ 200°C; ASTM D412
100% Modulus 0.00480 GPa
0.696 ksi
Press Cure 10 Minutes @ 177°C, Post Cure 16 Hours @ 200°C; ASTM D412
Compression Set 49 %

@Treatment Temp. 200 °C,
Time 252000 sec
49 %

@Treatment Temp. 392 °F,
Time 70.0 hour
Method B, -214 O-rings, Aged 70 Hours, 25% Deformation; ASTM D395
69 %

@Treatment Temp. 200 °C,
Time 605000 sec
69 %

@Treatment Temp. 392 °F,
Time 168 hour
Method B, -214 O-rings, Aged 168 Hours, 25% Deformation; ASTM D395
Thermal Properties Metric English Comments
Maximum Service Temperature, Air 200 °C
392 °F
Brittleness Temperature -35.0 °C
-31.0 °F
Transformation Temperature -2.00 °C
28.4 °F
TR10
Descriptive Properties Value Comments
Color Off White
Form Slab
MH, Maximum Toque 11.9 Inch-lb
100 cpm, 0.5° Arc, 6 Minutes @ 177°C, ASTM D5289
ML, Minimum Torque 2.0 Inch-lb
100 cpm, 0.5° Arc, 6 Minutes @ 177°C, ASTM D5289
t2, Time to 2 Inch-lb Rise from Minimum 0.8 Minutes
100 cpm, 0.5° Arc, 6 Minutes @ 177°C, ASTM D5289
t'50, Time to 50% Cure 1.1 Minutes
100 cpm, 0.5° Arc, 6 Minutes @ 177°C, ASTM D5289
t'90, Time to 90% Cure 2.7 Minutes
100 cpm, 0.5° Arc, 6 Minutes @ 177°C, ASTM D5289
Copyright © lookpolymers.com All Rights Reserved