- HOME
- POLYMER SEARCH
- Thermoplastic
- Polyethylene (PE)
- LDPE
- Low Density Polyethylene (LDPE), Molded
- A. Schulman CP775-01 Molding Grade, Low Density Polyethylene
A. Schulman CP775-01 Molding Grade, Low Density Polyethylene
| Category | Polymer , Thermoplastic , Polyethylene (PE) , LDPE , Low Density Polyethylene (LDPE), Molded |
| Manufacturer | |
| Trade Name | |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | A. Schulman CP775-01 Molding Grade, Low Density Polyethylene.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
DescriptionCp 755-01 is a molding grade, low-density polyethylene. ApplicationCP 755-01 meets the specification contained in FDA Regulation 177.1520 for food contact applications.Information provided by A. Schulman.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 0.919 g/cc | 0.919 g/cc | ASTM D792 |
| Melt Index of Compound | 8.0 g/10 min | 8.0 g/10 min | Condition E; ASTM D1238 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Tensile Strength at Break | 10.0 MPa | 1450 psi | at max load; ASTM D638 |
| Elongation at Break | 200 % | 200 % | ASTM D638 |
| Flexural Stiffness | 117 MPa | 17000 psi | ASTM D747 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Vicat Softening Point | 92.0 °C | 198 °F | ASTM D1525 |
Users viewing this material also viewed the following:
Copyright © lookpolymers.com All Rights Reserved