- HOME
- POLYMER SEARCH
- Thermoplastic
- Ionomer
- A. Schulman FORMION™ FI 301 Ionomer
A. Schulman FORMION™ FI 301 Ionomer
| Category | Polymer , Thermoplastic , Ionomer |
| Manufacturer | |
| Trade Name | |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | A. Schulman FORMION™ FI 301 Ionomer.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Information provided by A. Schulman.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 0.920 g/cc | 0.920 g/cc | ISO 1183/1 |
| Linear Mold Shrinkage | 0.010 - 0.014 cm/cm @Thickness 3.20 mm |
0.010 - 0.014 in/in @Thickness 0.126 in |
72 hr; ISO 294 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Shore D | 40 | 40 | 15 sec delay; ISO 868 |
| Tensile Strength, Ultimate | 16.0 MPa | 2320 psi | at max load; ISO 527 |
| Elongation at Break | 425 % | 425 % | ISO 527 |
| Flexural Modulus | 0.430 GPa | 62.4 ksi | Tangent; ISO 178 |
| Izod Impact, Notched (ISO) | NB | NB | ISO 180 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Deflection Temperature at 0.46 MPa (66 psi) | 38.0 °C @Thickness 3.20 mm |
100 °F @Thickness 0.126 in |
ISO 75 |
Users viewing this material also viewed the following:
- Multibase Nylex™ 4032 Polyamide + PP
- Polymax® Maxelast® P3896 TPE, PP Overmold or Standalone use
- LG Chemical Lupox® LW5402A PBT+PC+GF40%
- ITW Plexus Plexusâ„¢ MA550 Methacrylate Adhesive
- SABIC Innovative Plastics NORYL WCA871 PPE-TPE (Asia Pacific)
- A. Schulman POLYBATCH™ Green 3373 Concentrate Based In Polyethylene
- Covestro Desmopan® DP 8798A S043 Polyurethane
- Entec Hypro™ PP-HP35NS Homopolymer, 35 Melt Flow, Nucleated, Anti-stat
- Arlon 56609R028 0.029" Uncured/Cured Silicone Rubber with Fiberglass Substrate
- BASF 2-Ethylhexanol
Copyright © lookpolymers.com All Rights Reserved