- HOME
- POLYMER SEARCH
- Thermoplastic
- Ionomer
- A. Schulman FORMION™ FI 401 Ionomer
A. Schulman FORMION™ FI 401 Ionomer
| Category | Polymer , Thermoplastic , Ionomer |
| Manufacturer | |
| Trade Name | |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | A. Schulman FORMION™ FI 401 Ionomer.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Information provided by A. Schulman.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 1.12 g/cc | 1.12 g/cc | ISO 1183/1 |
| Linear Mold Shrinkage | 0.0010 - 0.0030 cm/cm @Thickness 3.20 mm |
0.0010 - 0.0030 in/in @Thickness 0.126 in |
72 hr; ISO 294 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Shore D | 63 | 63 | 15 sec delay; ISO 868 |
| Tensile Strength, Ultimate | 24.0 MPa | 3480 psi | at max load; ISO 527 |
| Elongation at Break | 20 % | 20 % | ISO 527 |
| Flexural Modulus | 1.175 GPa | 170.4 ksi | Tangent; ISO 178 |
| Izod Impact, Notched (ISO) | 63.0 kJ/m² | 30.0 ft-lb/in² | ISO 180 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Deflection Temperature at 0.46 MPa (66 psi) | 47.0 °C @Thickness 3.20 mm |
117 °F @Thickness 0.126 in |
ISO 75 |
Users viewing this material also viewed the following:
- Akro-Plastic Akromid® B4 S1 PA, Cold-Impact Resistant (discontinued **)
- Humiseal 1A27 Urethane Conformal Coating
- Solvay Technyl® A218V43 43% Glass Filled, Heat Stabilized Nylon 66
- Teknor Apex Telcar® TL-1000-95 Thermoplastic Elastomer
- BASF Ultramid® A3EG7 35% Glass Filled PA66 (Dry)
- Loctite® Gasket Eliminator® 504 Flange Sealant
- Victrex® HT™ G45 Polyetherketone
- BASF Ultradur® B 4300 G3 High Speed 15% Glass Filled BK 15045 PBT
Copyright © lookpolymers.com All Rights Reserved