- HOME
- POLYMER SEARCH
- Thermoplastic
- Polyethylene (PE)
- HDPE
- High Density Polyethylene (HDPE), Injection Molded
- A. Schulman LP481 Molding Grade High-Density Polyethylene
A. Schulman LP481 Molding Grade High-Density Polyethylene
| Category | Polymer , Thermoplastic , Polyethylene (PE) , HDPE , High Density Polyethylene (HDPE), Injection Molded |
| Manufacturer | |
| Trade Name | |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | A. Schulman LP481 Molding Grade High-Density Polyethylene.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
DescriptionLP 481 is a molding grade high-density polyethylene. Information provided by A. Schulman.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 0.953 g/cc | 0.953 g/cc | ASTM D792 |
| ESCR 100% Igepal® | 1.0 hour | 1.0 hour | Condition B; ASTM D1693 |
| Melt Index of Compound | 20 g/10 min | 20 g/10 min | Condition E; ASTM D1238 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Tensile Strength, Yield | 23.4 MPa | 3400 psi | ASTM D638 |
| Elongation at Yield | 20 % | 20 % | ASTM D638 |
| Flexural Modulus | 0.634 GPa | 92.0 ksi | 1% secant; ASTM D790 |
| Falling Dart Impact | 176 J @Temperature -40.0 °C |
130 ft-lb @Temperature -40.0 °F |
F50; ASTM D3056 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Brittleness Temperature | -100 °C | -148 °F | ASTM D746 |
Users viewing this material also viewed the following:
Copyright © lookpolymers.com All Rights Reserved