- HOME
- POLYMER SEARCH
- Thermoplastic
- Polystyrene (PS)
- Polystyrene, Molded, Unreinforced
- Aaron Industries AVPS M 100-2 Virgin Polystyrene
Aaron Industries AVPS M 100-2 Virgin Polystyrene
| Category | Polymer , Thermoplastic , Polystyrene (PS) , Polystyrene, Molded, Unreinforced |
| Manufacturer | Aaron Industries Corporation |
| Trade Name | AVPS |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Aaron Industries AVPS M 100-2 Virgin Polystyrene.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Melt flow index may be specified.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 1.04 g/cc | 1.04 g/cc | ASTM D792 |
| Linear Mold Shrinkage | 0.0060 cm/cm | 0.0060 in/in | ASTM D955 |
| Melt Flow | 4.0 - 12 g/10 min @Load 5.00 kg, Temperature 200 °C |
4.0 - 12 g/10 min @Load 11.0 lb, Temperature 392 °F |
ASTM D1238 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Tensile Strength | 39.3 MPa | 5700 psi | ASTM D638 |
| Flexural Modulus | 2.65 GPa | 385 ksi | ASTM D790 |
| Izod Impact, Notched | 0.587 - 0.801 J/cm | 1.10 - 1.50 ft-lb/in | ASTM D256 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Deflection Temperature at 0.46 MPa (66 psi) | 108 °C | 226 °F | ASTM D648 |
Users viewing this material also viewed the following:
- RheTech Products HP521-229 15% Talc Reinforced High Performance Polypropylene Copolymer, UV Stabilized, 195A Medium Neutral
- Orbilan RubberLen® R70 TPE, light grey
- Premix Thermoplastics PRE-ELEC® PS 1328
- Chevron Phillips Ryton® R10-110BL Polyphenylene Sulfide Compound (discontinued **)
- SABIC Innovative Plastics LNP STAT-KON SD000 PA12
- Saint-Gobain Norton® F710 Chemically Resistant Skived PTFE Sheet
- SABIC Innovative Plastics LNP THERMOCOMP LF006 PEEK (Asia Pacific)
- Teknor Apex APEX® 468 Polyvinyl Chloride, Flexible
- Goodfellow Platinum 87/Rhodium 13Thermocouple Alloy
- Plenco 2408 Phenolic, Granular, Injection Molded
Copyright © lookpolymers.com All Rights Reserved