Ametek P430L P/M Stainless Steel, Sintered from 6.6 g/cc Green Density

Category	Metal , Ferrous Metal , Stainless Steel , T 400 Series Stainless Steel
Manufacturer	Ametek
Trade Name
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Ametek P430L P/M Stainless Steel, Sintered from 6.6 g/cc Green Density.pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

Powder apparent bulk density 2.8 g/cc; powder flow 30 sec/50g.Compacting properties measured on powders with 1% lithium stearite. Sintering was done in dissociated ammonia at 1121°C (2050°F) for 45 minutes. Sintered properties below were determined using transverse rupture bars. Compacting pressure 55 tsi. Green strength 1750 psi. Dimensional change from die size -0.5%.Information provided by Ametek Specialty Metal Products.

Mechanical Properties	Metric	English	Comments
Tensile Strength, Ultimate	450 MPa	65300 psi
Elongation at Break	3.0 %	3.0 %

Component Elements Properties	Metric	English	Comments
Carbon, C	0.020 %	0.020 %
Chromium, Cr	17 %	17 %
Iron, Fe	82 %	82 %	as balance
Manganese, Mn	0.20 %	0.20 %
Phosphorous, P	0.010 %	0.010 %
Silicon, Si	0.90 %	0.90 %
Sulfur, S	0.020 %	0.020 %

Users viewing this material also viewed the following: